1. Introduction
Thank you for choosing the MEIKEE 25W RGBW LED Wall Washer Light. This product is designed for both indoor and outdoor lighting projects, offering versatile color-changing capabilities with a convenient RF remote control. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your light fixture.
2. Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- This product operates on 120V AC. Use only with compatible power sources.
- The light fixture is IP66 waterproof, suitable for outdoor use. However, do not immerse the light in water.
- Keep the product away from flammable materials.
- Do not attempt to disassemble or modify the light fixture. This will void the warranty and may cause electrical hazards.
- If any damage is observed, discontinue use immediately and contact customer support.
3. What's in the Box
Verify that all components are present and undamaged:
- 1 x MEIKEE 25W RGBW LED Wall Washer Light
- 1 x RF Remote Controller
- 2 x Mounting Brackets
- Screws and Wall Plugs for installation
- 1 x User Manual (this document)
Image 3.1: Contents of the package, showing the LED wall washer light, power cable, and RF remote control.
4. Setup and Installation
The MEIKEE LED Wall Washer Light is designed for fast and easy installation with a standard 120V American plug.
4.1 Mounting the Light
- Choose a suitable flat surface for mounting, such as a wall, ceiling, or floor.
- Position the two sturdy mounting brackets on the desired surface. Mark the drilling points through the bracket holes.
- Drill holes at the marked positions. Insert wall plugs if necessary for secure mounting.
- Attach the brackets to the surface using the provided screws.
- Secure the LED wall washer light to the mounted brackets. The brackets allow for 180° adjustment to direct the light as needed.
4.2 Power Connection
Once mounted, simply plug the 120V standard American plug into a compatible power outlet. The light is designed for 'Plug & Play' operation, requiring no complex wiring.
Image 4.1: Key features and installation components, including the adjustable bracket and US plug.
5. Operating Instructions (RF Remote Control)
The MEIKEE 25W RGBW LED Wall Washer Light is controlled by a 29-key wireless RF remote controller. This remote allows for 360° free control within an effective distance of up to 39.3 feet (12 meters), without needing to aim directly at the light fixture.
5.1 Remote Control Functions
- ON/OFF: Power the light on or off.
- Brightness +/-: Adjust the light intensity (6 levels).
- Color Selection: Direct buttons for Red (R), Green (G), Blue (B), White (W), and various mixed colors.
- FLASH / SMOOTH: Select between dynamic flash modes or smooth color transitions.
- Speed +/-: Adjust the speed of dynamic modes.
- Timing Function: Set the light to turn off automatically after 2, 4, or 6 hours.
Image 5.1: RF Remote Control layout and button functions.
5.2 Timing & Memory Function
- Timer Function: Press the '2H', '4H', or '6H' buttons on the remote to set the light to automatically turn off after the selected duration.
- Memory Function: The light features a memory function. When turned on again via the remote control, it will recall the last color, mode, and brightness settings, eliminating the need to reset them.
6. Maintenance
To ensure optimal performance and longevity of your MEIKEE LED Wall Washer Light, follow these maintenance guidelines:
- Cleaning: Periodically clean the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components. Ensure the power is disconnected before cleaning.
- Inspection: Regularly inspect the power cord and plug for any signs of damage. If damage is found, do not use the light and contact customer support.
- Storage: If storing the light for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
7. Troubleshooting
If you encounter issues with your MEIKEE LED Wall Washer Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; Remote battery depleted; Light fixture malfunction. | Check power connection and outlet; Replace remote battery; Contact customer support. |
| Remote control not working. | Remote battery depleted; Obstruction between remote and light; Remote out of range. | Replace remote battery; Ensure clear line of sight (though RF is 360°, extreme obstructions can interfere); Move closer to the light (within 39.3ft/12m). |
| Light colors are incorrect or flickering. | Loose connection; Internal fault. | Ensure power plug is securely connected; Disconnect and reconnect power; Contact customer support if problem persists. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | MEIKEE |
| Model | 25W RGBW LED Wall Washer Light |
| Power Source | Corded Electric (120V) |
| Wattage | 25 watts |
| Light Source Type | LED |
| Light Color | Multicolor (RGBW) |
| Control Method | RF Remote Control |
| Remote Range | Max 39.3ft (12m) |
| Water Resistance Level | IP66 Waterproof |
| Special Features | Remote Controlled, Timing Function, Memory Function |
9. Warranty and Support
MEIKEE is committed to providing high-quality products and customer satisfaction. Your purchase includes:
- Technical Support: 24-hour message technical support online.
- Warranty: Please refer to the product packaging or official MEIKEE website for specific warranty details.
If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact us. We are dedicated to resolving any issues within 24 hours.
For support, visit the MEIKEE Store on Amazon.