EASYERA B0D897B8X4

EASYERA Countertop Ice Maker User Manual

Model: B0D897B8X4

1. Important Safeguards

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons.

  • Read all instructions before using the appliance.
  • Do not touch hot surfaces. Use handles or knobs.
  • To protect against electrical shock, do not immerse cord, plug, or any part of the appliance in water or other liquid.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
  • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
  • The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
  • Do not use outdoors.
  • Do not let cord hang over edge of table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
  • Do not use appliance for other than intended use.
  • This appliance is intended for household use only.
  • Do not use with an extension cord unless it is fully inserted into the appliance.
  • Ensure the voltage indicated on the appliance matches your local power supply.

2. Product Overview

The EASYERA Countertop Ice Maker is designed to provide convenient and efficient ice production for your home, office, or recreational vehicle. It is capable of producing both bullet-shaped ice and chewable nugget ice, featuring quiet operation and a self-cleaning function.

Key Features:

  • Fast Ice Production: Produces 9 bullet ice cubes in as little as 6 minutes (up to 26 pounds in 24 hours) and the first nugget ice cube in 5 minutes (up to 33 pounds in 24 hours).
  • Two Ice Types: Capable of producing both bullet-shaped ice (in two sizes) and soft, chewable nugget ice.
  • Chewable Ice: The nugget ice melts slower, providing a quick chill for beverages while preserving authentic flavors.
  • Compact and Portable: Sleek design with a sturdy handle for easy transport.
  • Quiet Operation: Operates at less than 35dB, comparable to a working refrigerator.
  • Easy to Use: Simple control panel and user-friendly interface.
  • Self-Cleaning Function: Efficient 30-minute self-cleaning cycle.

Product Components:

Familiarize yourself with the main components of your ice maker.

EASYERA Countertop Ice Maker with ice scoop and drink

Image: The EASYERA Countertop Ice Maker, showcasing its compact design, transparent lid, and included ice scoop, alongside a refreshing drink with ice. Note: This image displays both bullet and nugget ice maker variations.

EASYERA Countertop Ice Maker control panel

Image: Close-up view of the EASYERA Ice Maker's control panel, showing indicators for "Ice Full", "Add Water", and the "Ice/Clean" button.

Ice maker producing 9 bullet ice cubes in 6 minutes

Image: Illustration demonstrating the bullet ice maker's speed, showing 9 bullet-shaped ice cubes being formed, with text indicating "9 ICE CUBES IN JUST 6 MINS" and "26 LBS / DAY" production capacity.

Two sizes of chewable bullet ice: small and large

Image: Comparison of two sizes of bullet ice, labeled as "Small" for food cooling and "Large" for juice, under the heading "CHEWABLE IN 2 SIZES".

3. Setup

Unpacking and Initial Inspection:

  • Carefully remove the ice maker from its packaging.
  • Inspect the appliance for any shipping damage. If any damage is found, do not operate the ice maker and contact customer support.
  • Remove all packing materials, tapes, and labels.
  • Ensure all accessories, such as the ice scoop and ice basket, are present.

Placement:

  • Place the ice maker on a flat, stable, and level surface.
  • Ensure there is adequate ventilation around the unit. Leave at least 4 inches (10 cm) of space around the sides and back for proper air circulation.
  • Avoid placing the ice maker near heat sources (e.g., ovens, radiators, direct sunlight) or in areas with high humidity.
  • Do not place the appliance directly on carpet or other soft surfaces that could block the ventilation openings.

First Use:

  • Before first use, it is recommended to clean the unit. Refer to the "Maintenance and Cleaning" section for detailed instructions.
  • After cleaning, allow the unit to sit upright for at least 2 hours before plugging it in. This allows the refrigerant to settle.
  • Plug the ice maker into a grounded electrical outlet.

4. Operating Instructions

Adding Water:

  • Open the lid and remove the ice basket.
  • Fill the water reservoir with potable water up to the MAX fill line. Do not overfill.
  • Replace the ice basket and close the lid.
  • If the "Add Water" indicator light illuminates, it means the water level is low and needs refilling.

Making Ice:

  • Ensure the unit is plugged in and the water reservoir is filled.
  • Press the "Ice/Clean" button once to start the ice making cycle. The indicator light will illuminate.
  • The first batch of ice may take slightly longer to produce. Subsequent batches will be faster.
  • The ice maker will automatically stop when the ice basket is full, and the "Ice Full" indicator light will illuminate. Remove ice to resume production.
  • To stop ice production at any time, press the "Ice/Clean" button again.

Ice Type Selection:

This ice maker is capable of producing both bullet-shaped ice and chewable nugget ice. The specific ice type produced may be determined by the model variant or an automatic internal process, as there is no explicit ice type selection button on the control panel shown. Refer to your specific product packaging or model details for confirmation of the primary ice type.

Image showing the high daily capacity of 33 lbs of nugget ice

Image: Visual representation of the nugget ice maker's "HIGHER DAILY CAPACITY" of "33 LBS" of ice, with an illustration of 35oz ice cubes per cup and "144+ CUPS PER DAY".

5. Maintenance and Cleaning

Self-Cleaning Function:

The ice maker features an automatic self-cleaning cycle. It is recommended to run this cycle once a week.

  • Ensure the water reservoir is filled with clean water.
  • Press and hold the "Ice/Clean" button for 3-5 seconds until the cleaning cycle begins. The indicator light may flash or change color to indicate cleaning mode.
  • The cleaning cycle typically lasts for 30 minutes. Do not interrupt the cycle.
  • Once the cycle is complete, drain the water from the reservoir as described below.
Efficient 30 minutes self-cleaning process

Image: Diagram illustrating the internal self-cleaning mechanism of the ice maker, with icons indicating "1 Press", "30 Mins", and "Once A Week" for the cleaning frequency.

Regular Cleaning:

For optimal performance and hygiene, clean the ice maker regularly, especially if it's not used frequently.

  • Unplug the ice maker from the power outlet.
  • Remove the ice basket.
  • Drain any remaining water from the reservoir using the drain plug located at the bottom or side of the unit (refer to your specific model's design for drain plug location).
  • Clean the interior with a soft cloth dampened with a mild detergent solution. Rinse thoroughly with clean water.
  • Wipe the exterior with a soft, damp cloth.
  • Dry all parts thoroughly before reassembling and storing or using again.
  • Do not use abrasive cleaners, solvents, or harsh chemicals.

Draining the Water:

  • Locate the drain plug, usually at the bottom or back of the unit.
  • Place a basin or towel underneath the drain plug.
  • Remove the drain plug to allow water to flow out.
  • Once all water has drained, securely replace the drain plug.

6. Troubleshooting

Before contacting customer service, please refer to the following table for common issues and their solutions.

ProblemPossible CauseSolution
Ice maker not working.No power.Check if the unit is plugged in and the outlet is working. Check circuit breaker.
"Add Water" indicator is on.Water reservoir is empty or low.Fill the water reservoir to the MAX fill line.
"Ice Full" indicator is on.Ice basket is full.Remove ice from the basket.
Ice production is slow or ice is too small.Room temperature is too high; water temperature is too high.Place the ice maker in a cooler environment. Use colder water.
Unusual noise during operation.Unit not level; internal components settling.Ensure the unit is on a flat, stable surface. Minor noises are normal during operation. If noise is excessive, contact support.
Ice has an odd taste or smell.Unit needs cleaning; stale water.Perform a self-cleaning cycle and thorough manual cleaning. Use fresh, clean water.
Image illustrating low noise operation of the ice maker

Image: Graphic comparing the noise level of an oven (60dB) to the ice maker (35dB), emphasizing its quiet operation, with a person relaxing nearby.

7. Specifications

FeatureDetail
BrandEASYERA
ModelCountertop Ice Maker (ASIN: B0D897B8X4)
Daily Ice ProductionUp to 26 lbs (Bullet Ice) / Up to 33 lbs (Nugget Ice) per 24 hours
Ice ShapeBullet Ice (2 sizes), Chewable Pellet Ice (Nugget Ice)
Ice Cycle TimeApprox. 6 minutes for 9 bullet ice cubes; 5 minutes for first nugget ice cube
RefrigerantR600a
Noise LevelLess than 35dB
Self-Cleaning FunctionYes (30-minute cycle)

8. Warranty and Support

EASYERA products are manufactured to the highest quality standards. For any questions, technical support, or warranty claims, please contact EASYERA customer service.

Please have your product model number (B0D897B8X4) and purchase information ready when contacting support.

For the most up-to-date warranty information and contact details, please refer to the official EASYERA website or your purchase documentation.

© 2024 EASYERA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.