Introduction
This manual provides essential instructions for the safe and effective use of your HTC Men's Hair Clippers & Beard Trimmer Grooming Kit. Please read this manual thoroughly before first use and retain it for future reference.
Safety Information
- Avoid direct contact with eyes during operation.
- Keep the device away from water sources when not specifically designed for wet use or cleaning.
- Ensure the device is fully charged before cordless operation to prevent power interruptions.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
Product Overview & What's in the Box
Your HTC Grooming Kit is an all-in-one solution for hair and beard trimming, designed for versatility and ease of use.
Image: The HTC Hair Clippers Grooming Kit, showcasing the main clipper unit, four adjustable guide combs (1/8, 1/4, 3/8, 1/2 inches), a USB charging cable, a cleaning brush, and lubricating oil.
Components:
- Main Clipper Unit (Model AT-129C)
- 4 Adjustable Guide Combs (3mm, 6mm, 9mm, 12mm)
- USB Charging Cable
- Cleaning Brush
- Lubricating Oil
Setup
1. Charging the Device
The HTC AT-129C can be used both corded and cordless. For cordless use, ensure the device is fully charged. Connect the provided USB charging cable to the charging port at the bottom of the clipper and plug the other end into a standard USB power source (e.g., computer, wall adapter).
Image: The HTC hair clipper is shown connected to a USB power strip via its charging cable, indicating the charging process.
A full charge typically provides 60 minutes of operating time. The charging indicator light will illuminate during charging.
2. Attaching Guide Combs
Select the desired guide comb (3mm, 6mm, 9mm, or 12mm) based on your preferred hair length. Align the comb with the clipper blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.
Image: A close-up view of the HTC hair clipper's stainless steel blades, with various guide comb attachments displayed next to it, illustrating the different sizes available.
Operating Instructions
1. Powering On/Off
Slide the power switch located on the front of the clipper to the 'ON' position to start the device. Slide it to 'OFF' to power down.
2. Hair Trimming
For haircuts, attach the appropriate guide comb. Start with a longer comb if unsure, and gradually switch to shorter combs for desired length. Move the clipper against the direction of hair growth for an even cut.
Image: A person is shown using the HTC hair clipper to trim the hair on the back of their head, demonstrating its use for haircuts.
3. Beard and Body Trimming
The clipper can be used for beard, mustache, sideburns, goatees, stubble, and other body hair. Use without a guide comb for a close 'zero cut' trim, or with a guide comb for desired length. Always ensure the skin is clean and dry before trimming.
Image: A person is using the HTC hair clipper to precisely trim their beard, highlighting its functionality for facial hair grooming.
4. Instructional Video
Video: This video demonstrates the unboxing, assembly of guide combs, charging process, and practical use of the HTC AT-129C Professional Hair Clipper for various grooming tasks.
Maintenance
1. Cleaning
The HTC AT-129C features an IPX7 waterproof design, allowing for easy cleaning. After each use, remove the guide comb and rinse the clipper head directly under running water to remove hair clippings. Ensure the device is powered off before cleaning.
Image: The HTC hair clipper is being held under a running faucet, with water flowing over its blades and body, illustrating its fully washable and waterproof feature.
Use the provided cleaning brush to remove any stubborn hair particles. Allow the clipper to air dry completely before storing or recharging.
2. Lubrication
Periodically apply a small drop of the provided lubricating oil to the blades to maintain optimal performance and extend blade life. Turn the clipper on for a few seconds after oiling to distribute the oil evenly.
Troubleshooting
- Clipper not turning on: Ensure the device is fully charged. If using corded, check the power connection.
- Reduced cutting performance: Clean the blades thoroughly and apply lubricating oil. Ensure the guide comb is correctly attached.
- Unusual noise: Clean the blades and check for any obstructions. If the issue persists, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 1.77 x 1.57 x 6.89 inches |
| Item Weight | 6.07 ounces (172 Grams) |
| Power Source | Battery Powered (1 Lithium Ion battery included) |
| Waterproof Rating | IPX7 |
| Recommended Uses | Beard, Body, Chest, Face, Head, Neck, Under Arm |
Warranty and Support
Your HTC Grooming Kit comes with a 365-day warranty from the date of purchase. Should you have any questions or require assistance with your product, please do not hesitate to contact HTC customer support. Refer to your purchase documentation for specific contact details.
