1. Introduction
Thank you for choosing the Omzer OM-CLB Automatic Self-Cleaning Cat Litter Box. This device is designed to provide a clean and hygienic environment for your cat(s) by automating the litter cleaning process. It features app control, health monitoring, and a large capacity suitable for multiple cats.

Image: The Omzer OM-CLB Automatic Self-Cleaning Cat Litter Box, showcasing its compact design next to a cat and travel luggage, highlighting its suitability for maintaining pet care while owners are away.
2. Safety Instructions
- Read all instructions before operating the device.
- Keep the device away from water and moisture.
- Ensure the power cord is not damaged and is properly connected to a grounded outlet.
- Do not allow children or pets to play with the device.
- Use only recommended cat litter types (clumping clay litter is generally suitable).
- Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
- Ensure the device is placed on a stable, level surface.
3. Product Overview
The Omzer OM-CLB features an enclosed design with an internal rotating drum, a waste collection bin, and various sensors for safe and efficient operation.

Image: An exploded view diagram of the Omzer OM-CLB, illustrating the locations and functions of its three integrated sensors: the Entrance Infrared Sensor for cat detection, the Waste Collecting Box Infrared Sensor for capacity monitoring, and the Gravity Sensor for differentiating multiple cats.
Key Components:
- Main Unit: Houses the rotating drum and control panel.
- Rotating Drum: Contains the cat litter and sifts waste.
- Waste Collection Bin: Located beneath the drum, collects sifted waste.
- Control Panel: Buttons and indicators for manual operation and status.
- Sensors: Includes an Entrance Infrared Sensor (halts rotation upon cat detection), a Waste Collecting Box Infrared Sensor (alerts when full), and a Gravity Sensor (differentiates multiple cats).
- Power Adapter: For connecting the unit to an electrical outlet.
4. Setup
4.1 Unpacking
- Carefully remove all components from the packaging.
- Verify that all parts are present and undamaged.
- Retain packaging for future transport or storage.
4.2 Placement
- Place the litter box on a firm, level surface indoors.
- Ensure there is adequate space around the unit for ventilation and access.
- Avoid placing near heat sources or in direct sunlight.
4.3 Filling with Litter
- Open the top access point of the rotating drum.
- Pour clumping cat litter into the drum.
- Ensure the litter level is between the MIN and MAX lines indicated inside the drum. Do not overfill.
- Close the top access point securely.

Image: A hand demonstrating the process of adding cat litter to the Omzer OM-CLB, with a visual cue for the maximum fill level to ensure proper operation and prevent litter from sticking.
4.4 Power Connection
- Connect the power adapter to the unit's power input.
- Plug the power adapter into a standard electrical outlet.
- The unit will power on, and indicator lights may illuminate.
4.5 App Connection (Omzer Smart App)
The Omzer OM-CLB supports 2.4G Wi-Fi for app control and monitoring.
- Download the 'Omzer Smart' app from your device's app store.
- Create an account or log in.
- Follow the in-app instructions to add your Omzer OM-CLB device. This typically involves putting the device into pairing mode and connecting to your home 2.4G Wi-Fi network.
- Once connected, you can access remote control, health monitoring, and scheduling features.

Image: A smartphone screen showing the Omzer Smart app's interface, which provides status reminders, multi-cat data insights, timing functions, and remote cleaning control for the Omzer OM-CLB Automatic Self-Cleaning Cat Litter Box.
5. Operating Instructions
5.1 Automatic Cleaning Cycle
- The device is designed to automatically initiate a cleaning cycle a few minutes after your cat exits the litter box.
- The internal drum will rotate, sifting clean litter and depositing waste into the collection bin.
- The Entrance Infrared Sensor ensures the drum stops rotation immediately if a cat approaches during a cycle.
5.2 Manual Cleaning
- Press the 'Clean' button on the control panel to initiate a cleaning cycle manually.
- Alternatively, use the Omzer Smart app to start a cleaning cycle remotely.
5.3 App Features
- Remote Control: Start/stop cleaning cycles from anywhere.
- Health Monitoring: Track your cat's litter box usage, frequency, and duration. This data can provide insights into your cat's health.
- Status Reminders: Receive notifications for waste bin full, litter levels, or maintenance alerts.
- Scheduling: Set custom cleaning schedules.
6. Maintenance
6.1 Emptying the Waste Collection Bin
- When the Waste Collecting Box Infrared Sensor detects a full bin, you will receive an alert via the app or an indicator light on the unit.
- Pull out the waste collection bin from the front of the unit.
- If using a drawstring liner, pull the drawstring to seal the bag and dispose of the waste.
- Replace the liner (if applicable) and slide the bin back into the unit until it clicks into place.

Image: A user demonstrating the waste disposal process by pulling the drawstring of a liner bag from the Omzer OM-CLB's waste collection bin, illustrating a hygienic and hands-free method of waste removal.
6.2 Cleaning the Unit
- Exterior: Wipe the exterior surfaces with a damp cloth and mild detergent. Avoid harsh chemicals.
- Interior Drum: For a deeper clean, empty all litter from the drum. The drum can be removed for washing with water and mild soap. Ensure it is completely dry before reassembling.
- Sensors: Gently wipe sensors with a soft, dry cloth to ensure proper function.
- Always unplug the unit before performing any deep cleaning.
6.3 Litter Replacement
- Regularly check the litter level and replenish as needed to maintain optimal performance.
- Completely replace all litter every 2-4 weeks, or as necessary, depending on usage and odor.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit not powering on | Power cord disconnected; outlet malfunction | Check power cord connection; try a different outlet. |
| Cleaning cycle not starting automatically | Cat still in unit; sensors obstructed; litter level too high/low | Ensure cat has exited; clean sensors; adjust litter level. |
| Waste bin full alert, but bin is not full | Waste Collecting Box Infrared Sensor obstructed/dirty | Clean the sensor located above the waste bin. |
| App not connecting to device | Incorrect Wi-Fi (not 2.4G); device not in pairing mode; poor signal | Ensure 2.4G Wi-Fi; re-enter pairing mode; move device closer to router. |
| Litter sticking to drum | Litter type unsuitable; drum dirty; humidity | Use high-quality clumping litter; clean drum thoroughly; ensure low humidity. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | OM-CLB |
| Product Dimensions (L x W x H) | 59.5L x 54.5W x 59H Centimetres |
| Item Weight | 13 kg |
| Capacity | 100L (Litter Drum) |
| Material | Polyester (Housing) |
| Connectivity | 2.4G Wi-Fi (App-Controlled) |
| Target Species | Cat |
| Color | Grey |
9. Warranty and Support
Omzer provides 24/7 U.S.-based customer support for any inquiries or issues you may encounter with your OM-CLB Automatic Self-Cleaning Cat Litter Box.
For assistance, please contact our support team through the Omzer Smart app or visit our official website for contact information.