1. Product Overview
The TP-Link Omada EAP115-Bridge KIT is a pre-configured outdoor wireless bridge solution designed for long-range point-to-point (PtP) and point-to-multipoint (PtMP) wireless transmission. Operating on the 5GHz band, it provides a stable and reliable wireless connection for distances up to 5 kilometers (3 miles) with speeds up to 300Mbps. This kit includes two units, ready for immediate deployment.
Key Features:
- Omada Cloud Management: Integrates with the TP-Link Omada cloud platform for centralized network management.
- Pre-configured Kit: Two devices are pre-paired for easy, plug-and-play setup, reducing installation time.
- High-Speed 5GHz Wireless: Offers up to 300 Mbps data transfer rates on the 5 GHz frequency band.
- Extended Range: Supports long-range wireless transmission up to 5 km (3 miles).
- Multiple Ethernet Ports: Equipped with three 10/100M Ethernet ports for flexible connectivity options.
- Durable Outdoor Design: Features an IP65 weatherproof enclosure and 6kV lightning protection for all-weather suitability.
- Flexible Power Options: Can be powered via Power over Ethernet (PoE) or DC adapters (PoE adapter included).
2. Safety Information
Please read and follow all safety instructions carefully before installing and operating this device. Failure to do so may result in damage to the device, property, or personal injury.
- Ensure the power source matches the device's requirements.
- Do not open or attempt to repair the device. Refer all servicing to qualified personnel.
- Install the device in a location that complies with local regulations and provides adequate ventilation.
- Use only the power adapter and accessories provided by the manufacturer.
- Protect the device from water, fire, humidity, or hot environments.
- For outdoor installations, ensure proper grounding and lightning protection measures are in place.
3. Package Contents
Verify that your package contains all the items listed below:
- Two (2) EAP115-Bridge KIT Units
- Two (2) PoE Adapters
- Two (2) Power Cords
- Installation Guide
- Mounting Kit
4. Hardware Components and Interface
Each EAP115-Bridge unit features a robust design suitable for outdoor environments. Familiarize yourself with the device's physical components and ports.
Image 4.1: Two EAP115-Bridge KIT units, showing their compact, rectangular design.
Image 4.2: Front view of a single EAP115-Bridge unit, highlighting the TP-Link logo.
Image 4.3: Side view of the EAP115-Bridge unit with the protective cover opened, revealing the Ethernet ports and reset button.
Image 4.4: Bottom view of the EAP115-Bridge unit, clearly showing the three 10/100M Ethernet ports, a reset button, and the DC power input.
Image 4.5: Product label located on the back of the EAP115-Bridge unit, displaying model information, serial number, and regulatory compliance marks.
Port Description:
- Ethernet Ports (3x 10/100M): Used for network connectivity. One port typically supports PoE input.
- DC Power Input: Alternative power input option.
- Reset Button: Used to restore the device to factory default settings.
5. Setup Guide
The EAP115-Bridge KIT is designed for easy installation with pre-configured units. Follow these steps for a successful deployment.
5.1 Site Survey and Mounting
- Choose Location: Select suitable outdoor locations for both bridge units, ensuring a clear line of sight between them for optimal performance. Avoid obstructions like buildings or dense foliage.
- Mounting: Use the provided mounting kit to securely attach each unit to a pole or wall. Ensure the units are oriented correctly and aligned towards each other.
5.2 Powering the Devices
Each unit can be powered using either the included PoE adapter or a DC adapter (sold separately).
- Using PoE Adapter:
- Connect an Ethernet cable from the PoE port of the adapter to one of the Ethernet ports on the EAP115-Bridge unit.
- Connect another Ethernet cable from the LAN port of the adapter to your network device (e.g., router, switch).
- Plug the power cord into the PoE adapter and then into a power outlet.
- Using DC Adapter (Optional):
- Connect a compatible DC adapter (not included) to the DC power input port on the EAP115-Bridge unit.
- Plug the DC adapter into a power outlet.
5.3 Initial Connection and Verification
Since the units are pre-configured, they should automatically establish a connection once powered on and properly aligned.
- Power on both EAP115-Bridge units.
- Observe the LED indicators on each unit. Agile LEDs will indicate the connection status and signal strength. A stable green light typically signifies a successful link.
- Connect a computer or network device to the LAN port of the client unit (the unit receiving the signal) to verify network access.
6. Operating Instructions
The EAP115-Bridge KIT operates as a transparent wireless bridge, extending your network wirelessly. For advanced management and monitoring, utilize the TP-Link Omada cloud platform.
6.1 Omada Cloud Platform Management
The EAP115-Bridge KIT can be managed through the TP-Link Omada cloud platform, offering centralized control over your network devices.
- Ensure your Omada Controller (hardware or software) is set up and running within your network.
- The EAP115-Bridge units should be discoverable by the Omada Controller. Follow the controller's instructions to adopt and manage the devices.
- Through the Omada interface, you can monitor device status, adjust settings, and perform firmware updates.
6.2 Point-to-Point (PtP) and Point-to-Multipoint (PtMP) Operation
The kit is pre-configured for a basic Point-to-Point link. For more complex Point-to-Multipoint scenarios, additional client units (sold separately) can be added and configured via the Omada platform.
- In a PtP setup, one unit acts as the main (AP) and the other as the client.
- For PtMP, one main unit can connect to multiple client units, extending network access to several remote locations.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your EAP115-Bridge KIT.
7.1 Weatherproofing
The IP65 rating provides protection against dust and water jets. Periodically inspect the device and its cable connections for any signs of wear or damage to maintain its weatherproof integrity.
7.2 Firmware Updates
It is recommended to keep the device firmware updated to benefit from performance improvements, new features, and security enhancements. Firmware updates can typically be managed through the Omada cloud platform or downloaded from the TP-Link support website.
7.3 Cleaning
Gently clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as they may damage the enclosure or internal components.
8. Troubleshooting
If you encounter issues with your EAP115-Bridge KIT, refer to the following common troubleshooting steps.
8.1 No Connection / Unstable Link
- Check Power: Ensure both units are powered on and receiving adequate power.
- Verify Line of Sight: Confirm there are no new obstructions between the units. Even partial obstructions can significantly degrade performance.
- Re-align Units: Minor adjustments to the physical alignment of the units can improve signal strength. Observe the agile LEDs for feedback.
- Cable Connections: Ensure all Ethernet cables are securely connected and undamaged.
- Reset Devices: If issues persist, try resetting both units to factory defaults using the reset button and re-configure if necessary (though pre-configuration should re-establish).
8.2 Slow Speed
- Signal Strength: Check the signal strength indicators. A weak signal will result in lower speeds. Adjust alignment if needed.
- Interference: Other 5GHz wireless devices in the area might cause interference. Consider changing the wireless channel if configurable via Omada.
- Network Congestion: Ensure the wired network connected to the main unit is not experiencing congestion.
For further assistance, please visit the TP-Link support website or contact technical support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | TP-Link |
| Model Name | EAP115-Bridge KIT |
| Item Model Number | Parent EAP115-Bridge KIT |
| Wireless Communication Standard | 802.11n |
| Frequency Band Class | Single-Band (5GHz) |
| Data Transfer Rate | Up to 300Mbps (5GHz) |
| Ethernet Ports | 3 x 10/100M Ethernet ports |
| Powering Options | PoE or DC Adapter |
| Weatherproof Rating | IP65 |
| Lightning Protection | 6kV |
| Antenna Type | Fixed |
| Compatible Devices | Personal Computer, Security Camera |
| Recommended Uses | Business, Home |
| Package Dimensions | 10.47 x 9.33 x 3.82 inches |
| Item Weight | 2.75 pounds |
| Manufacturer | TP-Link |
| Date First Available | June 26, 2024 |
10. Warranty and Support
TP-Link provides a limited warranty for this product. For detailed warranty information, product registration, and technical support, please visit the official TP-Link website.
Online Support: For the latest firmware, software, and user guides, please visit www.tp-link.com/support.
Technical Support Contact: Refer to the TP-Link support website for regional contact information.
