Kuvings AUTO6 Silver Cold Press Juicer User Manual

Introduction

This manual provides detailed instructions for the safe and efficient use of your Kuvings AUTO6 Silver Cold Press Juicer. Please read all instructions carefully before operating the appliance and retain this manual for future reference. The Kuvings AUTO6 is designed for extracting juice from various fruits, vegetables, leafy greens, and for preparing nut milk.

Product Components

Familiarize yourself with the parts included in your Kuvings AUTO6 Cold Press Juicer package:

Image: All components of the Kuvings AUTO6 Cold Press Juicer, including the motor base, juice bowl, auto hopper lid, pulp and juice jars, pusher, auger, juice strainer, user manual, and cleaning brush.

1. Motor Base: The main unit containing the motor.
2. Juice Bowl: Collects the extracted juice and pulp.
3. Auto Hopper Lid: Wide opening for hands-free feeding of ingredients.
4. Pulp & Juice Jars: Separate containers for collecting pulp and juice.
5. Pusher: Used to gently guide ingredients into the juicer if needed.
6. Auger: The screw-like component that presses ingredients.
7. Juice Strainer: Filters the juice from the pulp.
8. User Manual: This instruction guide.
9. Cleaning Brush: Specialized tool for cleaning the juicer components.

Setup Instructions

Follow these steps to assemble your Kuvings AUTO6 Juicer before first use:

1. Place the motor base on a stable, flat surface.
2. Align the juice bowl onto the motor base, ensuring it clicks securely into place.
3. Insert the juice strainer into the juice bowl.
4. Place the auger into the center of the strainer, rotating it slightly until it drops into position.
5. Attach the auto hopper lid onto the juice bowl, aligning the red dots or arrows. Rotate the lid clockwise until it locks securely. The juicer will only operate when the topset is properly tightened, ensuring safety.
6. Position the pulp and juice collection jars under their respective spouts.
7. Plug the power cord into a suitable electrical outlet.

Operating Instructions

The Kuvings AUTO6 features hands-free juicing with its automatic fruit cutting technology and patented JMCS technology for efficient juice extraction.

Image: The Kuvings AUTO6 juicer in operation, demonstrating the extraction of juice from oranges and carrots, highlighting the patented JMCS Technology.

1. Prepare Ingredients: Wash fruits and vegetables thoroughly. For the wide auto hopper, most whole fruits and vegetables can be added without extensive pre-cutting. For very fibrous ingredients or those with hard pits, it is recommended to remove pits and cut into smaller pieces to prevent clogging and ensure optimal performance.
2. Start Juicer: Press the 'ON' button to start the juicer.
3. Add Ingredients: Place prepared ingredients into the auto hopper. The juicer's automatic cutting technology will process them. For continuous juicing, you can add additional ingredients while the juicer is running.
4. Juice Extraction: The auger will slowly press the ingredients, separating the juice from the pulp. Juice will flow into the juice jar, and pulp will be expelled into the pulp jar.
5. Hands-Free Operation: The 140 mm wide auto hopper lid allows for convenient, hands-free juicing, minimizing the need for constant supervision.
6. Finish Juicing: Once all ingredients are processed, allow the juicer to run for a few more seconds to extract any remaining juice.
7. Turn Off: Press the 'OFF' button and unplug the appliance from the power outlet.

Cleaning and Maintenance

Regular cleaning ensures the longevity and hygienic operation of your juicer. Clean thoroughly after every use.

1. Disassemble: Turn off and unplug the juicer. Disassemble the topset components: auto hopper lid, auger, juice strainer, and juice bowl.
2. Rinse: Rinse all detachable parts under running water to remove large pulp residues.
3. Clean Strainer: Use the patented green cleaning tool kit to clean the juice strainer. This tool is designed to efficiently remove fine pulp from the strainer mesh.
4. Brush Components: Use the cleaning brush to clean the auger, juice bowl, and auto hopper lid.
5. Wipe Motor Base: Wipe the motor base with a damp cloth. Do not immerse the motor base in water.
6. Dry: Allow all cleaned parts to air dry completely before reassembling or storing.

Troubleshooting

If you encounter issues with your Kuvings AUTO6 Juicer, refer to the following common solutions:

• Juicer does not turn on:
  • Ensure the power cord is securely plugged into a working outlet.
  • Verify that the auto hopper lid is correctly assembled and locked into place. The safety mechanism prevents operation if not properly tightened.
• Excessive vibration or noise:
  • Check if the components (juice bowl, strainer, auger, lid) are assembled correctly and securely.
  • Ensure the juicer is placed on a flat, stable surface.
• Pulp is wet or juice yield is low:
  • Ensure ingredients are not overfed too quickly. Allow the juicer to process at its own pace.
  • Clean the strainer thoroughly, as clogged mesh can reduce efficiency.
• Juicer stops during operation:
  • The juicer may have overheated. Turn it off, unplug, and let it cool down for at least 30 minutes before restarting.
  • Ingredients might be jammed. Turn off, unplug, disassemble, clear any blockages, and reassemble.

For persistent issues, please contact Kuvings customer support.

Product Specifications

Warranty Information

Your Kuvings AUTO6 Cold Press Juicer comes with a comprehensive warranty to ensure peace of mind:

• Motor Warranty: 12 years on the motor. This includes 10 years of standard motor support plus an additional 2 years upon product registration.

Image: Warranty details showing 10 years motor support and an additional 2 years upon registration, for a total of 12 years of product support.

Please retain your proof of purchase for warranty claims.

Customer Support

Kuvings is committed to providing excellent customer service. For any queries, assistance, or service requirements, please contact us:

• Toll-Free Number: 1800 102 2239
• Operating Hours: Monday to Saturday, 10:00 AM to 6:00 PM

Our services include:

• Product knowledge and demonstrations.
• Installation assistance.
• Home service for repairs and maintenance.

Image: Map illustrating the widespread presence of Kuvings India offices across the country, with contact details for support services.