Dreo DR-HSH017S

Download PDF
Contents

Dreo Smart Wall Heater User Manual

Model: DR-HSH017S

Brand: Dreo

Introduction

The Dreo Smart Wall Heater is designed to provide efficient and comfortable heating for indoor spaces. Featuring PTC heating technology, smart control options, and robust safety features, this wall-mounted heater offers a convenient solution for maintaining optimal temperatures in bedrooms, offices, and other living areas. Its compact design and quiet operation ensure a pleasant environment.

Package Contents

Ensure all components are present before installation:

  • User Manual
  • Remote
  • Space Heater Body
  • Accessory Package (including wall anchors and screws)
  • Quick Start Guide

Setup and Installation

Before installation, ensure you have a suitable wall with no combustible materials and a nearby power outlet (Power Cord: 70.8 inches). The heater is designed for wall mounting and comes with a drilling guide for easy setup.

Dreo Smart Wall Heater with remote and app interface

The Dreo Smart Wall Heater, its remote control, and a mobile app interface.

Wall Mounting Steps:

  1. Select a firm wall location, ensuring it is at least 5 feet from the ceiling and 3 feet from the floor.
  2. Use the provided drilling guide to mark the positions for the wall anchors. Ensure the built-in bubble level on the guide is centered for accurate placement.
  3. Drill holes at the marked positions. (Note: Use appropriate drill bits for your wall type. Wall anchors included are for drywall.)
  4. Insert the wall anchors into the drilled holes.
  5. Screw in the top two anchors, leaving about 1/5 inch gap from the wall.
  6. Unfold the power cord from the back of the heater, ensuring it can reach the nearest outlet.
  7. Attach the two base anchors into the bottom of the heater unit.
  8. Carefully hang the heater from the top two screws. Ensure it is firmly seated before proceeding.
  9. Secure the bottom of the heater by screwing in the base anchors attached to the unit.
Dreo Smart Wall Heater mounted on a wall, showing heat output and features.

The Dreo Smart Wall Heater mounted, highlighting its heating power and manual tilt outlet fin.

Operating Instructions

The Dreo Smart Wall Heater offers multiple control options for your convenience.

Control Panel:

The heater features an intuitive LED display and touch controls on the unit itself. You can power on/off, adjust temperature, switch modes, and set timers directly from the panel.

Remote Control:

Use the included remote control to adjust settings from anywhere in the room. The remote allows you to power on/off, change heat levels, set timers, and even mute button sounds or turn off the display light for undisturbed sleep.

Dreo App & Voice Control:

For advanced control, download the DREO app on your smartphone. The app allows you to turn the heater on/off, adjust temperature, set schedules, monitor usage, and access additional settings. The heater is also compatible with Alexa and Google Assistant for hands-free voice commands.

Heating Modes:

  • Manual Modes (H1, H2, H3): These modes provide continuous heating at different power levels (e.g., 900W, 1300W, 1500W). You can select the desired heat intensity.
  • ECO Mode: This energy-efficient mode allows you to set a target room temperature. The heater will automatically adjust its operation to maintain the set temperature, optimizing energy consumption.
  • Fan Only Mode: Circulates air without heating, useful for warmer days.
Hand holding a smartphone controlling the Dreo Smart Wall Heater with various app features visible.

Control your Dreo Wall Heater from anywhere using the DREO app, compatible with Alexa and Google Assistant.

Oscillation:

The heater features 30° manual oscillation, allowing you to direct the airflow precisely where needed for optimal warmth distribution.

Maintenance

Regular cleaning of the air filter is recommended to maintain optimal performance and air quality. Refer to the user manual for detailed instructions on how to access and clean the filter.

Troubleshooting

  • ECO Mode Not Working as Expected: Ensure the target temperature is set appropriately. If the displayed temperature doesn't match your room temperature, use the Ambient Temperature Calibration feature in the DREO app to adjust it.
  • Display Light is Distracting: You can turn off the display panel light via the remote control or the DREO app settings.
  • Buttons are Unresponsive: The heater may be in Child Lock Mode. Hold down the '+' and '-' buttons on the control panel for 3 seconds to deactivate Child Lock.
  • Connection Issues with App/Wi-Fi: Ensure your cellphone's Wi-Fi and Bluetooth are enabled. The heater supports 2.4GHz Wi-Fi networks only. Try moving your phone closer to the device during pairing.

Specifications

BrandDreo
Model NumberDR-HSH017S
Special FeatureDigital Display, Adjustable Temperature, Electronic Thermostat, Remote Control, Wi Fi Enabled
ColorWhite
Form FactorWall-Mounted
Indoor/Outdoor UsageIndoor
Product Dimensions12.2"D x 4.53"W x 16.02"H
Recommended UsesOffice, Bedroom, Living Room, Indoor Use, Home
Mounting TypeWall Mount
Heating Coverage150 sq ft (primary), up to 750 sq ft (supplementary)
Fuel TypeElectric
Wattage1500 watts
Voltage120 Volts
Item Weight6.13 pounds

Warranty and Support

For warranty information, technical support, or any inquiries regarding your Dreo Smart Wall Heater, please refer to the full user manual included in the package or visit the official Dreo website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.