PowMr POW-100AH-12.8V-NA
Contents
PowMr 12V 100Ah LiFePO4 Battery User Manual
Model: POW-100AH-12.8V-NA | Brand: PowMr
1. Introduction
This manual provides essential information for the safe and efficient use of your PowMr 12V 100Ah LiFePO4 Battery. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your battery.
1.1 What's in the Box
- 12V 100Ah LiFePO4 Battery
- 2 x M8 Terminals
- 2 x Screws
The PowMr 12V 100Ah LiFePO4 battery is designed with a similar form factor to traditional lead-acid batteries, allowing for seamless replacement. It offers significantly higher capacity and longer cycle life compared to lead-acid alternatives.
2. Key Features
2.1 Compact Design and Easy Installation
The PowMr 12V 100Ah battery is engineered to fit the widely recognized BCI Group 24 size standard, ensuring compatibility with Group 24 battery boxes and various vehicles. Its compact dimensions simplify installation and allow for a direct replacement of Group 24 AGM batteries without complex modifications.

2.2 Superior Lifespan and Performance
This LiFePO4 battery offers over 4500+ deep cycles at 100% Depth of Discharge (DOD), significantly outperforming traditional lead-acid batteries (typically 300-600 cycles). With a design lifespan exceeding 10 years, it provides reliable, long-term energy storage.

2.3 Integrated 100A BMS Protection
Equipped with a built-in 100A Battery Management System (BMS), the battery is protected against overcharging, over-discharging, over-current, short-circuiting, and extreme temperatures. This enhances safety, performance, and extends the battery's operational life.

2.4 Expandable Capacity
The battery supports expansion up to 4 units in series and 4 units in parallel (4S4P configuration), allowing for a maximum system capacity of 48V 400Ah, providing up to 20.48kWh of energy. This flexibility makes it ideal for various applications, including RVs, solar energy systems, and home energy storage.


2.5 Lead-Acid Battery Replacement
The PowMr LiFePO4 battery is a perfect replacement for traditional lead-acid batteries, offering superior performance, lighter weight, and a significantly longer lifespan in a comparable size.

3. Specifications
| Parameter | Value |
|---|---|
| Model | POW-100AH-12.8V-NA |
| Capacity | 100Ah (0.2C / 25°C) |
| Nominal Voltage | 12.8V |
| Operating Voltage Range | 10V - 14.6V (Typical: 12.8V) |
| Charging Voltage | 14.6V |
| Discharge Cut-off Voltage | 10V |
| Max. Charging Current | 100A |
| Max. Discharge Current | 100A |
| Expansion in Series | Support up to 4 batteries connected in series |
| Expansion in Parallel | Support up to 4 batteries connected in parallel |
| Item Weight | 23.1 pounds |
| Product Dimensions | 6.69 x 8.46 x 12.8 inches |
| Terminal Type | M8 |

4. Setup and Installation
4.1 Pre-Installation Checklist
- Ensure all components listed in 'What's in the Box' are present.
- Verify the battery voltage is compatible with your system (Nominal 12.8V).
- Ensure the installation environment is dry, well-ventilated, and within recommended temperature ranges.
4.2 Connecting the Battery
Connect the battery to your system using appropriate M8 terminals and cables. Ensure all connections are secure and properly tightened to prevent loose connections and potential hazards.
4.3 Series and Parallel Connection
The PowMr 12V 100Ah battery can be connected in series for higher voltage systems (up to 4S) and in parallel for increased capacity (up to 4P). When connecting multiple batteries, ensure all batteries are of the same model and have similar states of charge before connecting. Always follow proper wiring diagrams and safety precautions for series and parallel configurations.
5. Operation Guidelines
5.1 Charging the Battery
The battery supports a maximum charging current of 100A. It can be recharged using various methods:
- Battery Charger: Use a compatible 12V battery charger.
- Solar Panel: Connect to a solar panel system with an appropriate charge controller.
- Generator: Utilize a generator with a suitable charger.

5.2 Discharging the Battery
The battery has a maximum discharge current of 100A. It is designed for energy storage applications and is suitable for powering various devices and systems.

5.3 Suitable Applications
The PowMr 12V 100Ah LiFePO4 Battery is ideal for:
- RVs and Campers
- Solar Energy Systems
- Home Energy Storage
- Marine Applications (Boats, Kayaks)
- Vans and Trailers

5.4 Important Notice
This battery is designed for energy storage purposes. It is not suitable for use as a starter battery or to power golf carts.
6. Maintenance
LiFePO4 batteries require minimal maintenance compared to lead-acid batteries. However, following these guidelines will help ensure maximum lifespan:
- Regular Inspection: Periodically check battery terminals for corrosion or loose connections. Clean terminals if necessary.
- Charge Level: Avoid leaving the battery in a fully discharged state for extended periods. Recharge immediately after discharge.
- Storage: If storing the battery for a long time, ensure it is charged to approximately 50% State of Charge (SOC) and stored in a cool, dry place away from direct sunlight and extreme temperatures.
- Temperature: Operate and store the battery within its specified temperature range to prevent damage and ensure optimal performance.
7. Troubleshooting
If you encounter issues with your PowMr LiFePO4 battery, consider the following common troubleshooting steps:
- Battery Not Charging: Check all connections from the charger to the battery. Ensure the charger is compatible and functioning correctly. Verify the charging voltage is within the specified range (14.6V).
- No Power Output: Check battery voltage with a multimeter. Ensure terminals are clean and connections are secure. Verify that the load is not exceeding the maximum discharge current (100A). The BMS may have activated a protection mode (e.g., over-discharge, over-current).
- Unusual Odor or Swelling: Immediately disconnect the battery from all loads and chargers. This indicates a serious issue. Do not attempt to use or repair the battery.
For further troubleshooting assistance or complex issues, please do not hesitate to contact our support team for detailed guidance.
8. Safety Information
Always adhere to these safety precautions to prevent injury or damage to the battery and surrounding equipment:
- Do Not Short Circuit: Avoid connecting the positive and negative terminals directly.
- Do Not Open Battery: The battery case should not be opened or tampered with. There are no user-serviceable parts inside.
- Avoid Extreme Temperatures: Do not expose the battery to fire, excessive heat, or extreme cold.
- Proper Ventilation: Ensure adequate ventilation around the battery during operation and charging.
- Secure Installation: Install the battery in a stable location to prevent accidental drops or movement.
- Children and Pets: Keep the battery out of reach of children and pets.
- Disposal: Dispose of the battery according to local regulations. Do not dispose of it with household waste.
9. Warranty and Support
PowMr is committed to providing high-quality products and customer satisfaction. For any questions, technical support, or warranty inquiries, please contact the PowMr support team through the official channels or your point of purchase. Please have your model number (POW-100AH-12.8V-NA) and purchase details ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.