1. Introduction
This manual provides essential information for the safe and effective operation of your Potensic ATOM 3-Axis Gimbal 4K GPS Drone and the Potensic Remote ID Module. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance.
The Potensic ATOM drone features a 3-axis gimbal for stable 4K video capture, GPS positioning, and a foldable design for portability. The included Remote ID Module enhances compliance with aviation regulations by broadcasting identification and location information.
2. Safety Guidelines
Operating a drone requires responsibility. Adhere to all local aviation regulations and guidelines. Failure to do so may result in serious injury, property damage, or legal penalties.
- Pre-Flight Check: Always inspect the drone, remote controller, and batteries before each flight. Ensure all components are in good working order.
- Flight Environment: Fly in open areas, away from people, buildings, and obstacles. Avoid flying near airports or restricted airspace.
- Weather Conditions: Do not fly in strong winds, rain, snow, or fog.
- Battery Safety: Use only approved chargers and batteries. Do not overcharge or puncture batteries.
- Remote ID Compliance: Ensure the Remote ID Module is properly installed and functioning according to local regulations.
- Maintain Visual Line of Sight: Always keep the drone within your visual line of sight during flight.
3. Product Overview
3.1 Potensic ATOM Drone
The Potensic ATOM drone is designed for aerial photography and videography, featuring a compact, foldable design.
Image: The Potensic ATOM drone, highlighting its 3-axis gimbal and 4K camera system. It features a 12MP SONY CMOS Sensor for ultra-stable imaging.
- 3-Axis Gimbal: Provides stable footage for 4K video capture.
- 4K Video Resolution: Records high-quality video.
- GPS Positioning: Enhances flight stability and allows for advanced flight modes.
- Foldable Design: For easy transport and storage. Weighs less than 249g, potentially exempting it from certain FAA or Remote ID requirements depending on region and use.
Image: A person carrying the Potensic ATOM drone in a pocket, illustrating its compact, foldable, and portable design, weighing under 249g.
Image: A close-up of the Potensic ATOM drone's battery compartment, indicating a maximum flight time of 32 minutes and a transmission range of up to 6 kilometers.
3.2 Potensic Remote ID Module
The Remote ID Module is an external device designed to broadcast the drone's identification and location data, complying with regulatory requirements.
Image: A comparison showing the Potensic Remote ID Module's features: an IP54 dust/waterproof cap, a safe charging cable, and multiple mounting methods, contrasting with common issues in other modules.
- IP54 Dust/Water Proof Cap: Protects the charging port.
- Safe Charging Cable: Ensures secure power delivery.
- Various Mount Ways: Allows flexible attachment to different drone models.
- Long-lasting Battery: Up to 4 hours of operation per charge.
- Enhanced Transmission: Extended range of 300m+ with Bluetooth 5.1.
- Strong Compatibility: Designed to fit with various drone models.
Image: The Potensic Remote ID Module positioned in front of four different drone models, illustrating its strong compatibility across various drone types.
Image: The Potensic Remote ID Module connected to a charging cable, with an icon indicating a powerful, long-lasting battery life of up to 4 hours per charge.
4. Setup
4.1 Drone Preparation
- Unfold the Drone: Carefully unfold the drone arms and propellers.
- Install Battery: Insert the fully charged flight battery into the drone until it clicks securely.
- Propeller Check: Ensure propellers are securely attached and free from damage.
4.2 Remote Controller Setup
- Charge Remote Controller: Ensure the remote controller is fully charged.
- Install Mobile Device: Attach your smartphone to the remote controller holder.
- Connect Cable: Use the provided cable to connect your mobile device to the remote controller.
- Download App: Download and install the official Potensic flight application on your mobile device.
4.3 Remote ID Module Installation
- Charge Module: Fully charge the Remote ID Module using the provided safe charging cable.
- Mount Module: Securely attach the Remote ID Module to your drone using one of the various mounting methods. Ensure it does not obstruct propellers, sensors, or the camera.
- Power On: Power on the Remote ID Module. Refer to the module's specific instructions for pairing with your drone or app, if required.
5. Operating Instructions
5.1 Pre-Flight Procedures
- Power On: Turn on the remote controller, then the drone.
- App Connection: Open the Potensic flight app on your mobile device. Ensure the app connects to the drone and remote controller.
- GPS Signal: Wait for the drone to acquire a sufficient number of GPS satellites (indicated in the app) before takeoff.
- Gimbal Calibration: Allow the gimbal to self-calibrate.
- Remote ID Check: Verify that the Remote ID Module is active and broadcasting.
5.2 Flight Operations
- Takeoff/Landing: Use the dedicated takeoff/landing button in the app or on the remote controller, or manually initiate by moving control sticks.
- Control Sticks: Use the left stick for altitude and yaw, and the right stick for forward/backward and left/right movement.
- Camera Control: Adjust gimbal pitch and trigger photo/video recording via the remote controller or app.
- Intelligent Flight Modes: Explore features like Accurate Visual Tracking (if available and enabled in the app).
Image: The Potensic ATOM drone demonstrating its accurate visual tracking capability, following a person on a beach using its latest vision algorithm.
Image: The Potensic ATOM drone flying over a river, with a smartphone displaying enhanced transmission data (300m+ with Bluetooth 5.1) and GPS positioning accuracy of 3 meters.
5.3 Post-Flight Procedures
- Land Safely: Land the drone in a clear area.
- Power Off: Power off the drone, then the remote controller, and finally the Remote ID Module.
- Remove Battery: Remove the flight battery from the drone.
- Fold Drone: Carefully fold the drone arms for storage.
6. Maintenance
- Cleaning: Regularly clean the drone, gimbal, and camera lens with a soft, dry cloth. Avoid using harsh chemicals.
- Propeller Inspection: Check propellers for cracks, bends, or nicks before each flight. Replace damaged propellers immediately.
- Battery Care: Store batteries in a cool, dry place. Do not store fully charged or completely depleted batteries for extended periods.
- Firmware Updates: Periodically check for and install firmware updates for the drone, remote controller, and Remote ID Module via the Potensic app.
- Remote ID Module Port: Ensure the IP54 dust/waterproof cap is properly sealed on the Remote ID Module when not charging.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not power on | Low or uncharged battery; improperly installed battery. | Charge the flight battery fully. Reinstall the battery securely. |
| No GPS signal | Flying indoors; obstructed view of sky; magnetic interference. | Fly in an open outdoor area. Move away from metal structures or strong electromagnetic fields. |
| Unstable flight | Damaged propellers; strong winds; uncalibrated IMU/compass. | Inspect and replace damaged propellers. Avoid flying in strong winds. Perform IMU/compass calibration via the app. |
| Remote ID Module not detected | Module not powered on; low battery; not properly paired/connected. | Ensure module is powered on and charged. Refer to module instructions for pairing. |
| Poor video quality | Dirty camera lens; unstable gimbal; incorrect camera settings. | Clean the camera lens. Check gimbal for obstructions. Adjust camera settings in the app. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Potensic |
| Model Name | ATOM |
| Special Features | ATOM 3-Axis Gimbal 4K, Remote ID Module |
| Age Range (Description) | Adult |
| Color | White |
| Video Capture Resolution | 4K |
| Connectivity Technology | Wi-Fi |
| Included Components | Remote Control |
| Skill Level | Intermediate |
| Video Capture Format | MP4 |
| Remote Control Technology | Bluetooth |
| Control Type | Remote Control |
| Material | Aluminum |
| Wireless Communication Technology | Wi-Fi |
| Battery Cell Composition | Lithium Ion |
| Are Batteries Included | No |
| Operating Temperature | 104 Degrees Fahrenheit (40°C) |
| Supported Image Format | JPEG, RAW or other common formats |
| Video Output Resolution | 4K |
| Remote Control Included? | Yes |
| Optical Sensor Technology | CMOS |
| Rechargeable Battery Included | No |
9. Warranty and Support
For warranty information and technical support, please refer to the official Potensic website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Online Resources: Visit the official Potensic website for FAQs, updated manuals, and software downloads.
Customer Service: Contact information can typically be found on the Potensic website or within the product packaging.
