OLEVS WD-S-G9809G Quartz Watch for Men Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your OLEVS WD-S-G9809G Quartz Watch. Please read this manual thoroughly to ensure proper use and longevity of your timepiece.

Image: The OLEVS WD-S-G9809G Quartz Watch, featuring a black dial with diamond hour markers, a silver stainless steel band, and a date display. A strap adjustment tool and small gift boxes are also shown.

Setup

1. Unboxing and Initial Inspection

Upon receiving your OLEVS watch, carefully remove it from its packaging. Inspect the watch for any visible damage or irregularities. The package should include the watch, an instruction manual, and a strap adjustment tool.

2. Adjusting the Strap

The stainless steel bracelet length is adjustable to ensure a comfortable fit. Use the provided strap adjustment tool to remove or add links as necessary. If you are unsure, it is recommended to seek professional assistance for strap adjustment.

1. Locate the pins on the side of the watch links.
2. Place the strap in the adjustment tool, aligning the pin with the tool's pusher.
3. Gently turn the screw on the tool to push the pin out.
4. Remove the desired number of links.
5. Reassemble the strap by inserting the pins back into the links and gently tapping them into place.

Image: The OLEVS watch worn on a wrist, demonstrating the proper fit of the stainless steel strap after adjustment.

3. Setting the Time and Date

To set the time and date on your OLEVS quartz watch:

1. Pull the crown out to the first click position to adjust the date. Turn the crown clockwise or counter-clockwise until the correct date is displayed.
2. Pull the crown out to the second click position to adjust the time. Turn the crown to move the hour and minute hands until the correct time is set. Ensure to account for AM/PM if setting the date.
3. Once the time and date are set, push the crown back in to its original position to start the watch movement.

Operating Instructions

1. Time Reading

Your OLEVS watch displays time using hour, minute, and second hands. The diamond scale hour markers provide clear visibility.

2. Date Display

The watch features a double calendar window displaying the current date. This automatically advances every 24 hours. Adjustments may be needed for months with fewer than 31 days.

3. Luminous Feature

The watch hands are equipped with a high-definition luminous coating, allowing for easy time reading in low-light conditions. Exposure to light will charge the luminous material.

Image: The luminous hands and hour markers of the OLEVS watch glowing in the dark, illustrating its night-time visibility.

Maintenance

1. Water Resistance

Your OLEVS watch is 30M (3 ATM) water-resistant, suitable for daily activities such as handwashing, rain, and accidental splashes. It is not suitable for showering, bathing, swimming, diving, or any activities involving prolonged water immersion or hot water, as this can compromise the water seals.

Image: The OLEVS watch demonstrating its 30M water resistance against splashes, but not suitable for full immersion.

2. Cleaning

To clean your watch, wipe the case and strap with a soft, dry cloth. For stainless steel, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.

3. Battery Replacement

As a quartz watch, it is powered by a battery. When the watch stops or the second hand begins to jump irregularly, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and function.

Troubleshooting

• Watch not running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
• Incorrect time/date: Refer to the "Setting the Time and Date" section to reset.
• Condensation under crystal: This may indicate a breach in the water resistance. Avoid further contact with water and seek professional inspection.
• Strap discomfort: Ensure the strap is properly adjusted. Refer to the "Adjusting the Strap" section.

For issues not covered here, or if problems persist, please contact OLEVS customer support.

Specifications

Image: A diagram illustrating the key dimensions and product parameters of the OLEVS watch.

Warranty and Support

OLEVS provides a commitment to quality for its products. If you encounter any issues with your OLEVS WD-S-G9809G Quartz Watch, please contact OLEVS customer support through the platform where you purchased the product. The manufacturer is OLEVS.

For assistance, please refer to the contact information provided with your purchase or visit the official OLEVS store page.