Introduction
The Portronics Luxcell Bind Mini 10K is a compact and lightweight 10,000mAh power bank designed for convenient on-the-go charging. It features 22.5W fast charging capabilities and includes built-in Type-C and 8-pin cables, eliminating the need to carry separate charging accessories. This power bank is equipped with a Mach USB-A output port and an LED indicator to display the remaining battery level. Its universal compatibility allows it to charge a wide range of devices, including Android and iOS smartphones, tablets, and earbuds.
For enhanced safety, the Luxcell Bind Mini 10K is BIS certified and incorporates advanced chip protection against overcharging, short circuits, and overheating.
Package Contents
Upon unboxing your Portronics Luxcell Bind Mini 10K Power Bank, please verify that all items listed below are present and in good condition:
- 1 x Portronics Luxcell Bind Mini 10K Power Bank
- 1 x Type-C to Type-C Charging Cable (for recharging the power bank)
- 1 x Documentation (User Manual/Warranty Card)
Image: Front and back view of the Portronics Luxcell Bind Mini 10K Power Bank, showcasing its compact design and integrated charging cables.
Setup
Initial Charging of the Power Bank
Before first use, it is recommended to fully charge your Portronics Luxcell Bind Mini 10K Power Bank. Use the included Type-C to Type-C cable to connect the power bank's Type-C input port to a compatible USB wall adapter (not included) or a computer's USB port. The LED indicator lights will illuminate to show the charging progress and will remain solid when fully charged.
Understanding the LED Indicator
The transparent casing of the power bank features an LED indicator that provides real-time information about the power bank's battery level. Each illuminated segment represents a portion of the remaining charge. When charging, the lights will progressively illuminate until full.
Image: Detailed view of the power bank's LED indicator lights, which show the battery status, and the wake button.
Operating Instructions
Charging Your Devices
The Luxcell Bind Mini 10K offers versatile charging options with its triple output design:
- Built-in Type-C Cable: Directly connect devices with a Type-C port.
- Built-in 8-pin Cable: Directly connect devices with an 8-pin port (e.g., iPhones).
- Mach USB-A Output Port: Use your own USB-A to device cable to charge other compatible devices.
You can charge up to three devices simultaneously using a combination of these outputs. Simply plug your device into the appropriate port or cable, and the power bank will automatically begin charging. Press the 'Wake Button' if charging does not start automatically.
Image: Illustration demonstrating the power bank's ability to charge three devices concurrently using its USB-A port, built-in Type-C cable, and built-in 8-pin cable.
Universal Compatibility
The power bank is designed to be compatible with a wide array of electronic devices, including but not limited to:
- Android smartphones
- iPhones
- Tablets
- Earbuds
- Smartwatches
Image: The power bank connected to a smartphone, illustrating its broad compatibility with various devices like Android phones, iPhones, tablets, iPads, earphones, and smartwatches.
Maintenance
Proper care and maintenance will extend the lifespan of your Portronics Luxcell Bind Mini 10K Power Bank.
- Cleaning: Use a soft, dry cloth to clean the exterior of the power bank. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it in environments with high humidity.
- Battery Care: To maintain battery health, avoid completely discharging the power bank frequently. It is advisable to recharge it when the battery level is low. If storing for an extended period, charge it to about 50-70% capacity.
- Handling: Do not drop, disassemble, or attempt to repair the power bank yourself. This can damage the internal components and void the warranty.
Troubleshooting
If you encounter issues with your Portronics Luxcell Bind Mini 10K Power Bank, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Charging cable not properly connected; Wall adapter faulty; Power bank battery deeply discharged. | Ensure the Type-C charging cable is securely connected to both the power bank and the power source. Try a different wall adapter or USB port. Allow the power bank to charge for a longer period. |
| Device not charging from power bank | Power bank battery is empty; Cable not properly connected; Device is not compatible; Power bank is in standby mode. | Recharge the power bank. Ensure the built-in cables or your USB-A cable are securely connected to both the power bank and your device. Press the 'Wake Button' on the power bank. Verify device compatibility. |
| Slow charging | Using a non-fast charging adapter/cable; Device drawing high power; Multiple devices charging simultaneously. | Ensure you are using a fast-charging compatible wall adapter for recharging the power bank. For device charging, ensure your device supports 22.5W fast charging. Charging multiple devices will distribute the power. |
| LED indicator not working | Power bank is off; Internal malfunction. | Press the 'Wake Button' to activate the power bank and check the indicator. If the issue persists after charging, contact customer support. |
The Portronics Luxcell Bind Mini 10K is BIS certified and includes advanced chip protection layers to safeguard against common electrical issues. These protections include:
- Short Circuit Protection: Prevents damage from electrical shorts.
- Over-temperature Protection: Shuts down if internal temperature exceeds safe limits.
- Over-voltage Protection: Protects against excessive voltage input or output.
- Over-current Protection: Safeguards against excessive current flow.
Image: Visual representation of the power bank's built-in safety mechanisms, including protection against short circuits, over-voltage, and over-current.
If the problem persists after attempting these solutions, please contact Portronics customer support.
Specifications
Detailed technical specifications for the Portronics Luxcell Bind Mini 10K Power Bank:
| Feature | Description |
|---|---|
| Model Name | Luxcell Bind Mini (POR-2260) |
| Battery Capacity | 10000 Milliamp Hours (mAh) |
| Output Power | 22.5W Fast Charging |
| Output Ports | 1 x Mach USB-A, 1 x Built-in Type-C Cable, 1 x Built-in 8-pin Cable |
| Input Port | 1 x Type-C (for recharging the power bank) |
| Special Features | LED Indicator Lights, In-Built Cables (8 Pin + Type C), BIS Certified, Advanced Chip Protection (Short Circuit, Over-temperature, Over-voltage) |
| Dimensions (L x W x H) | 13.8 x 8.8 x 2.4 cm |
| Item Weight | 200 g |
| Color | Black |
| Country of Origin | India |
| Included in Box | Power Bank, Type-C to Type-C Charging Cable, Documentation |
Warranty and Support
Your Portronics Luxcell Bind Mini 10K Power Bank is manufactured by Portronics Digital Pvt. Ltd. and comes with a standard warranty as per the terms outlined in the included documentation. Please retain your purchase receipt for warranty claims.
For any product-related queries, technical assistance, or warranty support, please contact Portronics customer service:
- Email: help@portronics.com
- Phone: +91 9555-245-245
- Address: First Floor Property No D 8 Upper Basement Sector 8 Noida Uttar Pradesh 201301
The product's BIS certification ensures it meets Indian safety standards, providing an additional layer of assurance regarding its quality and reliability.
