DOGLinsen No Shock Dog Training Collar User Manual

1. Product Overview

The DOGLinsen No Shock Dog Training Collar is designed to provide a safe and humane way to train your dog using beep and vibration modes. It is suitable for small, medium, and large dogs, offering a wide control range and long-lasting battery life.

Image: The complete DOGLinsen No Shock Dog Training Collar set, including the remote transmitter and two pink receiver collars.

What's Included in the Package:

• Remote Transmitter (x1)
• Receiver (x2)
• Nylon Collar Strap (x2)
• Lanyard (x1)
• USB Charging Cable (x1)
• User Manual (x1)
• Box (x1)
• Clicker (x1)

Key Features:

• No Shock, No Prongs: Designed for safe and painless correction using only vibrations and sounds.
• 3 Training Modes: Beep, Vibration (1-100 levels), and Beep & Vibration (1-100 levels) for versatile training.
• Supports 3 Channels: Train up to 3 dogs simultaneously with individual level memory.
• 2800Ft Control Range: Robust signal penetration for effective training indoors and outdoors.
• IPX7 Waterproof Receiver: Ensures durability and functionality in various weather conditions.
• Adjustable Strap: Fits dogs weighing 10 to 110 pounds with neck circumferences from 8 to 27 inches.
• Long-lasting Battery Life: Receiver operates for 30 days, remote for 90 days on a single charge.

Image: Illustration highlighting the humane design of the collar, which uses no shock or prongs for training.

Image: Visual representation of the three gentle training modes available: Beep, Vibration, and a combination of both.

Image: Depiction of the extensive 2800ft remote control range, allowing for training from a distance.

2. Setup Guide

2.1 Charging the Devices

Use the provided 2-in-1 USB-C charging cable to charge both the remote control and the receiver simultaneously. A full charge takes approximately 2 hours. The receiver can operate for up to 30 days, and the remote control for up to 90 days on a single charge.

Image: Visual guide for charging the remote and receiver using the USB-C cable, emphasizing their extended battery life.

2.2 Pairing the Remote Control with the Receiver

To ensure proper communication between the remote and the receiver, follow these pairing steps:

1. Hold down the power switch button on the receiver until the indicator light starts flashing.
2. On the remote, press the Vibration button. The receiver should respond, indicating a successful pairing.
3. Next, press the Tone button on the remote. The receiver should respond again, confirming the pairing.

2.3 How to Wear the Collar Strap

The collar strap is adjustable to fit various dog sizes. Ensure the receiver unit is positioned comfortably on your dog's neck, with the strap snug enough to prevent movement but loose enough for two fingers to fit underneath.

Image: The adjustable collar strap, demonstrating its suitability for dogs ranging from 10 to 110 pounds.

3. Operating Instructions

3.1 Using Training Modes

The remote control offers three distinct training modes:

• Beep Mode: Delivers an audible tone.
• Vibration Mode: Provides a gentle vibration, adjustable from 1 to 100 levels.
• Beep & Vibration Mode: Combines both the beep and vibration, with vibration levels adjustable from 1 to 100.

Select the appropriate mode and intensity level based on your dog's temperament and the training situation. Start with lower levels and gradually increase if necessary.

3.2 Multi-Dog Training (3 Channels)

The remote features 3 channels, allowing you to train up to three dogs simultaneously. The system retains individual level settings for each dog, making it convenient to switch between pets without reconfiguring settings.

3.3 Using the Included Clicker

The clicker is a valuable tool for positive reinforcement training. When your dog performs a desired behavior, immediately press the clicker and follow it with a treat. This helps your dog associate the click sound with positive actions.

4. Maintenance

4.1 Waterproof Receiver

The receiver is professionally tested to meet the IPX7 waterproof standard, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows for training in rainy or snowy conditions, and even during swimming. However, it is recommended to dry the receiver thoroughly after exposure to water to prolong its lifespan.

Image: Demonstrates the IPX7 waterproof capability of the receiver, suitable for use in wet environments.

4.2 Battery Life and Charging

As mentioned, the devices feature long battery life. To maintain optimal performance, charge the devices regularly, especially before extended training sessions. Avoid completely draining the battery frequently.

4.3 Cleaning and Storage

Clean the collar and receiver regularly with a damp cloth to remove dirt and debris. Ensure all components are dry before storing. Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

5.1 Checking Receiver Battery Level

To check the battery level of the receiver, quickly press the power button twice in a row. The receiver will emit a series of beeps indicating the battery charge:

• 5 Beeps: Above 80% charge
• 4 Beeps: Above 60% charge
• 3 Beeps: Above 40% charge
• 2 Beeps: Above 20% charge
• 1 Beep: Below 20% charge (Recharge immediately)

5.2 Common Issues and Solutions

• Device Not Responding/Working:
    - Ensure both the remote and receiver are fully charged.
    - Re-pair the remote and receiver following the instructions in Section 2.2.
    - Check if the devices are within the 2800Ft control range. Obstacles can reduce range.
• Battery Drains Quickly:
    - Ensure the devices are fully charged before use. The stated battery life is an estimate and can vary with usage frequency and intensity.
    - If battery life significantly degrades over time, contact customer support.
• Vibration Too Strong/Weak:
    - Adjust the vibration level on the remote control (1-100 levels) to suit your dog's sensitivity. Start with the lowest effective level.
• Collar Too Big/Small:
    - The collar strap is adjustable for neck circumferences from 8 to 27 inches. Ensure proper adjustment for your dog's comfort and the receiver's effectiveness.

6. Specifications

Image: Detailed product dimensions for both the remote and the receiver.

7. Warranty and Support

7.1 Manufacturer's Warranty

This DOGLinsen product comes with a 2-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.

7.2 Customer Support

If you have any questions, concerns, or require assistance with your DOGLinsen No Shock Dog Training Collar, please do not hesitate to contact our customer support team. Refer to the contact information provided in the product packaging or on the official DOGLinsen website.