Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Yaheetech Boucle Desk Chair. Please read thoroughly before use to ensure proper and safe handling of the product.
Front view of the Yaheetech Boucle Desk Chair in white, featuring a cloud-shaped backrest and chrome base with wheels.
Safety Information
This chair has a maximum weight capacity of 300 lb. It is recommended for indoor use only and should be assembled following the instructions provided. Always maintain a stable base while using the chair, especially when adjusting the seat height or tilt tension. Ensure the chair is not used near any hazards and is kept away from children when not in use.
Package Contents
Before assembly, please verify that all components listed below are present and undamaged:
- 1 x Desk Chair (Seat and Backrest Assembly)
- 1 x Accessory kit (Screws, Allen Wrench)
- 1 x Assembly Instructions (This manual)
- 1 x Chair Base (Star-shaped with 5 arms)
- 5 x Casters (Wheels)
- 1 x Pneumatic Cylinder
- 1 x Mechanism Plate (Pre-attached to seat)
All components of the Yaheetech Boucle Desk Chair laid out on a rug, including the seat, backrest, base, wheels, and pneumatic cylinder.
Assembly Instructions
Follow these steps to assemble your Yaheetech Boucle Desk Chair. An assembly video is provided for visual guidance.
Instructional video demonstrating the step-by-step assembly process of the Yaheetech Boucle Desk Chair.
Step-by-Step Guide
- Attach Casters to Base: Insert each of the five casters into the holes at the end of each arm of the chair base. Push firmly until they click into place.
Close-up of a caster being inserted into the chrome chair base.
- Insert Pneumatic Cylinder: Place the pneumatic cylinder into the central hole of the assembled chair base. Ensure it sits securely.
Pneumatic cylinder being inserted into the center of the chair's chrome base.
- Attach Mechanism Plate to Seat: Align the mechanism plate (pre-attached to the seat) with the screw holes on the underside of the chair seat. Secure it using the provided screws and Allen wrench. Ensure all screws are tightened.
Underside of the chair seat showing the mechanism plate being screwed into place.
- Connect Seat to Base: Carefully place the assembled seat onto the top of the pneumatic cylinder. The seat will settle onto the cylinder.
Operating Instructions
Your Yaheetech Boucle Desk Chair offers several adjustable features for personalized comfort.
Height Adjustment
To adjust the chair's height, locate the lever under the right side of the seat. Pull the lever up while seated to lower the chair, or pull the lever up while standing to raise the chair. Release the lever at your desired height.
Diagram illustrating the seat height and tilt lock adjustment lever, and the tilt tension control knob.
Tilt Function
The chair features a rocking function for added comfort. Pull the same lever (used for height adjustment) outwards to activate the tilt, allowing the chair to rock. Push the lever inwards to lock the chair in an upright position. The tilt tension can be increased or decreased by rotating the round knob located at the front underside of the seat.
Close-up of the tilt tension control knob under the chair seat.
Swivel Function
The chair is designed with a 360-degree swivel, allowing for easy rotation and movement without needing to reposition the entire chair.
Video showcasing the features of the Yaheetech Boucle Desk Chair, including its 360-degree swivel and adjustable height.
Maintenance
To maintain the appearance and longevity of your chair, follow these care instructions:
- Cleaning: Spot clean any spills or stains immediately with a mild detergent and a damp cloth. Avoid harsh chemicals.
- General Care: Regularly dust the boucle fabric with a soft brush or vacuum with an upholstery attachment.
- Inspection: Periodically check all screws and connections to ensure they are tight. Re-tighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading of the fabric.
Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Name | Chair |
| Item Model Number | YT-00138748A |
| Color | White |
| Material | Boucle Fabric, Foam |
| Product Dimensions | 24"D x 28"W x 32.5"H |
| Seat Depth | 16.7 inches |
| Seat Length | 18.7 Inches |
| Chair Backrest Width | 28 Inches |
| Item Weight | 18.63 pounds |
| Maximum Weight Recommendation | 300 Pounds |
| Special Features | Adjustable Height, Rolling, Space Saving |
| Back Style | Tufted Back |
| Arm Style | Armless |
| Furniture Base Movement | Swivel |
| Indoor/Outdoor Usage | Indoor |
Troubleshooting
If you encounter any issues with your Yaheetech Boucle Desk Chair, please refer to the following common troubleshooting tips:
- Chair does not adjust height: Ensure the pneumatic cylinder is correctly installed and the height adjustment lever is fully engaged. Sometimes, sitting firmly on the chair while pulling the lever can help.
- Chair does not roll smoothly: Check the casters for any hair, debris, or obstructions that might be preventing smooth movement. Ensure all casters are securely inserted into the chair base.
- Chair feels unstable or wobbly: Verify that all screws used during assembly are tightened securely. Check the connections between the chair base, pneumatic cylinder, and seat mechanism.
- Backrest does not tilt: Ensure the tilt lock lever is disengaged (pulled outwards). Adjust the tilt tension knob to a looser setting if the tilt feels too stiff.
Warranty and Support
For warranty information, product support, or any further inquiries, please contact Yaheetech customer service through their official channels. You can also visit the official Yaheetech store for more information and contact options: