1. Introduction
Thank you for choosing the SoBuy FSR151-K-W Shoe Bench with Seat. This compact and functional furniture piece is designed to enhance your entryway or hallway with convenient shoe storage and a comfortable seating area. Constructed from durable MDF, it offers a practical solution for organizing your footwear while providing a place to sit when putting on or taking off shoes.
Please read this manual carefully before assembly and use to ensure proper installation and safe operation. Keep this manual for future reference.
2. Safety Information
Warning: To prevent accidents, it is crucial to secure the furniture to the wall using the included anti-tip kit. Failure to do so may result in injury or damage.
- Always follow the assembly instructions precisely.
- Do not exceed the maximum load capacity of 113 kg for the bench.
- Keep small parts and packaging materials away from children.
- Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten if necessary.
- Do not stand on the bench.
3. Package Contents
Before beginning assembly, verify that all parts listed in the assembly manual are present and undamaged. The package typically includes:
- Furniture panels (MDF components)
- Hardware kit (screws, dowels, hinges, anti-tip kit)
- Cushion
- Assembly instructions manual
If any parts are missing or damaged, please contact SoBuy customer service for assistance.
4. Setup and Assembly Instructions
Assembly of the SoBuy FSR151-K-W shoe bench requires careful attention to the provided step-by-step diagrams and instructions. While the process is designed to be straightforward, some users have noted that identifying specific screws or parts can be challenging. We recommend laying out all components and hardware before starting and matching them precisely to the diagrams.
- Unpack and Identify: Carefully unpack all components and compare them against the parts list in your assembly manual.
- Assemble Frame: Follow the diagrams to connect the main panels of the bench using the specified hardware. Ensure all connections are snug but do not overtighten.
- Install Shoe Flap Mechanism: Attach the flap mechanism and the front panel according to the instructions. This allows the shoe compartment to open and close smoothly.
- Attach Feet: Secure the feet to the base of the bench.
- Place Cushion: Position the padded cushion on top of the bench.
- Install Anti-Tip Kit: This is a critical safety step. Using the provided hardware, attach the anti-tip device to the back of the shoe bench and then securely fasten it to a solid wall. Refer to the specific instructions in your manual for detailed guidance on wall mounting.

Image: The assembled SoBuy FSR151-K-W shoe bench in a hallway setting, demonstrating its compact design and functionality.

Image: Detail of the shoe storage flap mechanism, illustrating how shoes are placed inside the compartment.
5. Operating Instructions
5.1. Shoe Storage
The shoe bench features a single flap compartment designed to store 4-6 pairs of shoes. To access, gently pull the integrated handle on the front panel. The flap will tilt forward, revealing the internal shelves. For larger shoes or to maximize space, some users have found it helpful to remove the internal divider, allowing shoes to be placed diagonally.

Image: The shoe compartment opened, displaying how shoes are stored within the single flap.
5.2. Seating Area
The top of the bench is fitted with a comfortable, padded linen and sponge cushion, providing a convenient spot to sit while putting on or taking off your shoes. Ensure the bench is stable and properly secured to the wall before using it as a seat.

Image: A detailed view of the comfortable grey padded cushion on the bench top.
6. Maintenance
To ensure the longevity and appearance of your SoBuy shoe bench, follow these maintenance guidelines:
- Cleaning: The painted surface is smooth and easy to clean. Wipe with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cushion Care: The linen cushion can be spot cleaned with a mild detergent and water. Allow to air dry completely.
- Durability: Made from resistant E1 MDF, the bench is designed to be moisture and rot-proof. However, avoid prolonged exposure to excessive moisture.
- Hardware Check: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten if any looseness is detected.
7. Troubleshooting
If you encounter any issues with your shoe bench, refer to the following common solutions:
- Difficulty during Assembly: If the assembly instructions seem unclear or parts are hard to identify, carefully re-examine the diagrams. Pay close attention to details like boreholes, grooves, and part numbers. Ensure you are using the correct hardware for each step.
- Damaged Parts: If any part arrives broken or damaged, do not attempt to assemble the unit. Contact SoBuy customer service immediately for a replacement.
- Shoes Do Not Fit: The shoe compartment is designed for standard shoe sizes. If larger shoes or boots do not fit, consider removing the internal divider within the flap to create more space, allowing shoes to be stored diagonally.
- Bench Instability: Ensure all assembly screws are fully tightened. Verify that the anti-tip kit is correctly installed and securely fastened to a solid wall.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | FSR151-K-W |
| Dimensions (W x D x H) | 60 cm x 24 cm x 52 cm (23.6 x 9.4 x 20.5 inches) |
| Weight | 11.4 kg (25.1 lbs) |
| Load Capacity (Bench) | 113 kg (249 lbs) |
| Material | E1 Grade MDF |
| Color | White |
| Special Feature | Ventilation |
| Mounting Type | Floor Mount |
| Recommended Use | Shoe storage, Entryway seating |

Image: Detailed dimension diagram of the shoe bench, indicating width, depth, and height measurements.

Image: Multiple views of the shoe bench with dimensions, emphasizing its slim profile.
9. Warranty and Support
SoBuy products are designed for quality and durability. If you have any questions, require assistance with assembly, or need to report a damaged part, please contact SoBuy customer service.
- Return Policy: You may return the item within 30 days of receiving the package. Please contact customer service to initiate a return.
- Contact: For support, please refer to the contact information provided with your purchase or visit the official SoBuy website.







