KQLKJ KQ-31

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

KQLKJ H13 True HEPA Air Purifier Model KQ-31 User Manual

Model: KQ-31 | Brand: KQLKJ

Introduction

This manual provides essential information for the safe and efficient operation of your KQLKJ H13 True HEPA Air Purifier. Please read it thoroughly before use and retain it for future reference.

Important Safety Information

  • Always unplug the air purifier before cleaning or performing any maintenance.
  • Do not operate the appliance with a damaged cord or plug.
  • Keep the air purifier away from water or other liquids.
  • Ensure the filter is correctly installed before operating the unit.
  • Do not block air inlets or outlets.
  • This appliance is for indoor use only.

Product Overview

The KQLKJ H13 True HEPA Air Purifier is designed to improve indoor air quality by removing various airborne particles and odors. It features a compact design with intuitive controls.

KQLKJ H13 True HEPA Air Purifier, front view

Figure 1: Front view of the KQLKJ H13 True HEPA Air Purifier.

Key Components:

  • Control Panel: Touch-sensitive buttons for power, fan speed, timer, night light, and child lock.
  • Air Inlet: Located around the lower part of the unit, designed for 360-degree air intake.
  • Air Outlet: Located at the top for purified air release.
  • H13 True HEPA Filter: Multi-layer filtration system.
  • Aromatherapy Compartment: Small tray for essential oil pads.

Setup Instructions

  1. Unpack the Air Purifier: Carefully remove the unit from its packaging.
  2. Prepare the Filter:
    • Turn the unit upside down.
    • Unscrew the bottom cover by turning it in the direction indicated by the 'open' arrow.
    • Remove the filter from inside the unit. The power adapter is also stored inside the filter.
    • Remove all plastic packaging from the filter.
    • Place the filter back into the air purifier, ensuring it sits correctly.
    • Replace and tighten the bottom cover by turning it in the direction indicated by the 'close' arrow.
    Illustration of the multi-layer H13 True HEPA filter.

    Figure 2: Illustration of the multi-layer H13 True HEPA filter.

  3. Connect Power: Insert the power adapter plug into the power port at the back of the air purifier, then plug the adapter into a standard electrical outlet.
  4. Placement: Place the air purifier on a flat, stable surface, ensuring at least 11.8 inches (30cm) of clearance from walls or other objects for optimal airflow.

Operating Instructions

The control panel is located on the top of the unit and features touch-sensitive buttons.

Top-down view of the air purifier control panel

Figure 3: Control panel with various settings.

  • Power On/Off: Touch the power button (⏻) to turn the air purifier on or off. The fan will start on low speed.
  • Fan Speed Adjustment: Tap the fan speed button (🍁) to cycle through 3 fan speeds: Sleep, Cozy, and Turbo.
  • Timer Function: Press the timer button (⏱) repeatedly to set the operating time for 1, 2, 4, or 8 hours. The unit will automatically turn off when the timer expires.
  • Night Light: Press the light bulb button (💡) to turn the night light on or off.
  • Child Lock: To activate, press and hold the light bulb button (💡) for 3 seconds. The control panel will be locked. To unlock, press and hold the light bulb button again for 3 seconds.
  • Aromatherapy Function: Open the aromatherapy compartment on the top of the unit. Add 2-3 drops of essential oils (not included) to the aroma pad. Close the compartment. The air purifier will diffuse the scent while operating.

Maintenance

Filter Replacement:

The replacement HEPA filter should be replaced every 3-6 months, depending on the environment and usage frequency. The filter replacement indicator light will illuminate when it's time for a change.

  1. Unplug the air purifier.
  2. Turn the unit upside down and unscrew the bottom cover.
  3. Remove the old filter.
  4. Insert a new KQLKJ replacement filter (Search for B0CNX4T2JT on Amazon).
  5. Replace and tighten the bottom cover.
  6. Plug in the air purifier. To reset the filter indicator, press and hold the filter reset button for 3 seconds.

Video 1: Demonstrates the process of replacing the air purifier filter.

Cleaning the Unit:

  • Wipe the exterior of the air purifier with a soft, dry cloth.
  • Do not use abrasive cleaners or solvents.

Troubleshooting

ProblemPossible CauseSolution
Unit does not turn on.Power cord not properly connected.Ensure the power cord is securely plugged into the unit and the outlet.
Poor air purification.Filter is dirty or clogged.Replace the filter as indicated by the filter replacement light.
Unusual noise during operation.Obstruction in the fan or improper filter installation.Unplug the unit, check for obstructions, and ensure the filter is correctly seated.
No scent from aromatherapy.Aroma pad is dry or compartment is empty.Add essential oils to the aroma pad or replace the pad.

Specifications

  • Model: KQ-31
  • Brand: KQLKJ
  • Filter Type: H13 True HEPA
  • Coverage Area: Up to 588 sq.ft (54.6m²) per hour
  • Noise Level (Sleep Mode): 20 dB
  • Power Source: DC
  • Product Dimensions: 5"D x 5"W x 8"H
  • Item Weight: 2 Pounds

Warranty and Support

For any questions or concerns regarding your KQLKJ air purifier, please contact us directly. KQLKJ provides lifetime service for its products.

Please refer to the original product listing or packaging for specific warranty details and contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.