Introduction
Thank you for choosing KICKER KS-Series KSC3504 3.5-inch 2-Way Thin-Mount Car Audio Speakers. These speakers are designed to deliver clear, detailed audio with a compact form factor, making them suitable for a wide range of vehicle installations. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.
Package Contents
- 4x KICKER KS-Series KSC3504 3.5" 2-Way Thin-Mount Car Audio Speakers
Setup and Installation
Proper installation is crucial for the performance and safety of your KICKER speakers. If you are unsure about any step, it is recommended to seek professional installation.
Mounting Considerations
- These speakers feature a thin-mount design, allowing for installation in tight spaces.
- They are designed for door mount applications. Ensure adequate clearance behind the mounting surface for the speaker magnet and wiring.
- Verify that the mounting location can securely hold the speaker's weight and withstand vehicle vibrations.
Wiring
The KSC3504 speakers have a 4-Ohm impedance. Connect them to an amplifier or head unit capable of safely driving a 4-Ohm load. Use appropriate gauge speaker wire for your installation to minimize power loss and ensure optimal sound quality.
- Connect the positive (+) terminal of the speaker to the positive (+) output of your amplifier/head unit.
- Connect the negative (-) terminal of the speaker to the negative (-) output of your amplifier/head unit.
- Ensure all connections are secure and insulated to prevent short circuits.
Image: Two KICKER KS-Series KSC3504 3.5-inch car audio speakers. The image displays the front of two speakers, highlighting the polypropylene cones and silk-dome tweeters with a distinctive yellow ring. One speaker is slightly angled to show its depth and mounting tabs.
Power Requirements
These speakers are designed to work best with 15 to 50 watts of recommended RMS power. They can handle a peak power of 100 watts. Exceeding the recommended RMS power can lead to speaker damage. Ensure your amplifier's output matches the speaker's power handling capabilities.
Operating Instructions
Once properly installed, your KICKER KS-Series speakers are ready for use. They are designed to reproduce a wide range of frequencies with clarity and detail.
Sound Characteristics
- Silk-dome tweeters: Provide natural, detailed high-frequency sound.
- Polypropylene cones: Internally dampened for precise midrange and midbass reproduction.
- Rubber surrounds: Durable and contribute to accurate cone movement.
Adjust your head unit's volume and equalizer settings to achieve your preferred sound balance. Avoid excessively high volume levels that cause audible distortion, as this can damage the speakers.
Maintenance
Your KICKER speakers require minimal maintenance to ensure long-lasting performance.
- Cleaning: Use a soft, dry cloth to gently wipe away dust from the speaker cones and surrounds. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check speaker connections for tightness and ensure no wires are frayed or exposed.
- Environment: While durable, avoid exposing speakers to excessive moisture or extreme temperatures.
Troubleshooting
If you experience issues with your speakers, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Speakers | Loose or incorrect wiring connections; Amplifier/head unit off or faulty; Speaker damaged. | Check all wiring connections for proper polarity and tightness. Ensure amplifier/head unit is powered on and functioning. Test with another known-good speaker if possible. |
| Distorted Sound | Volume too high; Incorrect amplifier gain settings; Damaged speaker; Poor audio source. | Reduce volume. Adjust amplifier gain settings to match head unit output. Check speaker cones for physical damage. Try a different audio source. |
| Intermittent Sound | Loose wiring; Faulty connection. | Inspect all wiring for loose connections or frayed insulation. Secure all terminals. |
If these steps do not resolve the issue, please contact KICKER customer support or your authorized dealer.
Specifications
| Feature | Specification |
|---|---|
| Brand | KICKER |
| Model Number | 251KSC3504 |
| Speaker Size | 3.5 Inches |
| Speaker Type | Coaxial, 2-Way |
| Peak Power Handling | 100 Watts |
| RMS Power Handling | 15-50 Watts |
| Impedance | 4 Ohms |
| Frequency Response | 80 Hz - 20 kHz |
| Sensitivity | 88dB |
| Tweeter Type | Silk-dome |
| Woofer Material | Polypropylene |
| Mounting Type | Door Mount |
| Connectivity Technology | Wired, Coaxial |
| Item Dimensions (D x W x H) | 10"D x 10"W x 10"H (Packaging/Shipping dimensions, actual speaker dimensions will vary) |
Warranty Information
KICKER provides a 1 Year Manufacturer Warranty for these speakers from the date of original purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, negligence, or unauthorized modification.
For full warranty terms and conditions, please refer to the official KICKER warranty documentation or contact KICKER customer support.
Support
If you have any questions, require technical assistance, or need to initiate a warranty claim, please contact KICKER customer support:
- Visit the official KICKER website for support resources and contact information.
- Contact your authorized KICKER dealer for local support.
You can also visit the KICKER Store on Amazon for more product information.
