1. Introduction and Overview
This manual provides essential instructions for the safe installation, operation, and maintenance of your Midea Megan Auto Clean 60 cm Kitchen Chimney. This advanced kitchen appliance is designed to effectively remove smoke and odors from your cooking area, enhancing your kitchen environment.
Key features include an energy-efficient BLDC motor, filter-less technology for reduced maintenance, Wi-Fi connectivity for smart control, intelligent auto-clean functionality, and intuitive gesture controls with 9 fan speeds.
Image 1.1: Front view of the Midea Megan Auto Clean 60 cm Kitchen Chimney.
2. Safety Information
Please read all safety instructions carefully before installation and operation to prevent personal injury or property damage. Keep this manual for future reference.
- Ensure the power supply voltage matches the rating label on the chimney.
- Do not allow children to operate or play with the appliance.
- Always disconnect the power supply before cleaning or performing any maintenance.
- Ensure adequate ventilation in the room when the chimney is used simultaneously with gas or other fuel-burning appliances.
- Do not flambé under the range hood.
- Regularly clean the oil collector to prevent grease buildup, which can be a fire hazard.
3. Product Components
The Midea Megan Auto Clean Kitchen Chimney package includes the following items:
- Main Chimney Unit
- Oil Collector
- Installation Kit (includes mounting hardware and a 10-foot aluminum pipe)
- User Manual
4. Setup and Installation
The Midea Megan Auto Clean Chimney comes with a free standard installation kit and professional installation service. It is highly recommended to utilize the professional installation service to ensure correct and safe setup.
4.1. Professional Installation
Upon delivery, contact Midea customer service to schedule your free standard installation. The service technician will:
- Mount the chimney securely to the wall.
- Connect the provided 10-foot aluminum ducting for exhaust.
- Ensure proper electrical connection.
- Provide a demonstration of the chimney's functions.
4.2. Wi-Fi Connectivity Setup
Your Midea Chimney is Wi-Fi enabled for smart control via the MSmartHome Mobile App.
- Download the MSmartHome Mobile App from your device's app store.
- Register for an account and log in.
- Follow the in-app instructions to add and register your Midea Chimney.
- Once registered, you can control the chimney remotely using your smartphone.
Image 4.1: MSmartHome Mobile App for remote control.
5. Operating Instructions
The Midea Chimney offers multiple ways to control its functions: touch panel, gesture control, and the MSmartHome App.
5.1. Touch Panel Control
The chimney features a responsive touch panel for direct control.
- Power ON/OFF: Press the power icon to turn the chimney on or off.
- Fan Speed Adjustment: Use the '+' and '-' buttons to cycle through 9 fan speeds.
- Light Control: Press the light icon to turn the LED lighting on or off.
- Auto Clean: Press the 'Clean' button to initiate the thermal auto-clean cycle.
Image 5.1: Ultra Real Screen Display and touch controls.
5.2. Gesture Control
The chimney can be operated with simple hand gestures.
- Power ON/OFF: Wave your hand from left to right over the sensor.
- Adjust Fan Speed: Wave your hand from right to left to increase speed, or left to right to decrease speed.
Image 5.2: Motion sensor control with hand gestures.
5.3. App Control (Wi-Fi)
Using the MSmartHome App, you can control your chimney remotely.
- Turn the chimney ON/OFF.
- Adjust fan speed (9 speeds available).
- Control light intensity.
- Monitor chimney usage.
- Set delay timers.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your Midea Chimney.
6.1. Auto Clean Function
The chimney features an intelligent thermal auto-clean function that uses high-temperature dry cleaning to efficiently separate and collect grease.
- Activate the auto-clean cycle by pressing the 'Clean' button on the control panel or through the MSmartHome App.
- Allow the cycle to complete.
Image 6.1: Thermal Auto Clean process.
6.2. Oil Collector Cleaning
The built-in oil collector gathers the grease separated during cooking and the auto-clean cycle. It should be emptied and cleaned regularly.
- Ensure the chimney is turned off and disconnected from power.
- Carefully remove the oil collector.
- Empty the collected oil and wash the collector with warm, soapy water.
- Rinse thoroughly and dry before reattaching.
6.3. Exterior Cleaning
Wipe the exterior surfaces of the chimney with a soft cloth dampened with mild detergent. Avoid abrasive cleaners or harsh chemicals.
6.4. Filter-less Technology
The advanced filter-less technology reduces the need for frequent filter cleaning or replacement, contributing to improved suction performance and lower noise levels. While there are no traditional filters to replace, regular cleaning of the oil collector is still crucial.
Image 6.2: Advanced Filter-less Technology for low maintenance and high efficiency.
7. Troubleshooting
If you encounter any issues with your Midea Chimney, refer to the following common troubleshooting steps. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not turn on | No power supply; loose connection | Check power cord and circuit breaker. Ensure proper connection. |
| Low suction power | Oil collector full; ducting obstruction; fan speed too low | Clean oil collector. Check ducting for blockages. Increase fan speed. |
| Unusual noise during operation | Loose parts; foreign object in fan; improper installation | Turn off and inspect for loose components or obstructions. Contact service if noise persists. |
| Wi-Fi connectivity issues | Router distance; incorrect password; app issues | Ensure chimney is within Wi-Fi range. Re-enter Wi-Fi password. Restart app or chimney. |
8. Specifications
Detailed technical specifications for the Midea Megan Auto Clean 60 cm Kitchen Chimney.
- Model: MH60V11ET25BF-IN
- Air Flow Capacity: 1600 Cubic Meters Per Hour (CMPH)
- Material: Metal
- Noise Level: 58 Decibels
- Mounting Type: Wall Mount
- Included Components: Installation Kit, Oil Collector, User Manual
- Amperage: 0.7 Amps
- Controls Type: Gesture, App, Touch
- Voltage: 220 Volts
- Number of Speeds: 9
- Item Weight: 13 Kilograms
- Light Source Type: LED
- Wattage: 155 Watts
- Filter Technology: Filter-less (with Mesh type internal grease separation)
- Ventilation Type: Ducted
- Annual Energy Consumption: 100 Kilowatt Hours Per Year
- Special Features: Auto Clean, Built-In Oil Collector, LED Lighting, Timer
- Product Dimensions (LxWxH): 50 x 60 x 44.5 Centimeters
- Color: Black
- Finish Type: Powder Coated
Image 8.1: Overview of key features and specifications.
9. Warranty Information
Your Midea Megan Auto Clean Kitchen Chimney is covered by the following warranty:
- Motor Warranty: 10 Years
- Comprehensive Warranty: 2 Years (on the entire product, excluding consumables and physical damage)
Please retain your purchase receipt for warranty claims. The warranty terms and conditions are subject to Midea's official policy.
10. Customer Support
For any queries, service requests, or technical assistance, please contact Midea customer support:
- Refer to the contact information provided in your warranty card or on the official Midea India website.
- You can also visit the official Midea store on Amazon for product information and support: Midea Store
