Brightever HSG-T22 Solar Outdoor Motion Sensor Wall Lights User Manual

1. Introduction

Thank you for choosing Brightever Solar Outdoor Motion Sensor Wall Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new solar lights. Designed for outdoor use, these lights offer bright, energy-efficient illumination with advanced motion sensing capabilities and multiple lighting modes to enhance security and convenience around your home, patio, garden, garage, or front door.

Figure 1: Brightever Solar Outdoor Wall Light in use, demonstrating daytime charging and nighttime illumination.

2. Product Features

• Solar Powered & Energy-Saving: Equipped with a built-in rechargeable battery and monocrystalline silicon solar cells, these lights convert sunlight into electricity with an efficiency rate of up to 20.5%. They require 6-8 hours of direct sunlight for a full charge, providing 8-10 hours of illumination at night.
• Bright Security Lighting: Each light features 178 high-brightness LEDs, offering a total of 1424 LEDs for an 8-pack. The reflector design and 270° lighting angle ensure wide and powerful illumination.
• Upgraded PIR Motion Detector & 3 Modes: The advanced PIR motion sensor detects movement up to 16 feet within a 120° angle. Three distinct lighting modes are available:
  • Mode 1 (Stay-on Mode): Automatically turns on at night and maintains 50% brightness throughout the night.
  • Mode 2 (Dim Light Sensor Mode): Turns on at night with dim light. When motion is detected, brightness increases to 100% for 15 seconds, then returns to dim light.
  • Mode 3 (Strong Light Sensing Mode): Remains off until motion is detected, then turns on at 100% brightness for 15 seconds before turning off again.
• Durable & Weatherproof: Constructed from premium ABS and plastic, these lights are waterproof (IP65 rated), heat-resistant, and frost-resistant, designed to withstand various extreme weather conditions.

Figure 2: Visual representation of the three lighting modes.

Figure 3: Illustration of the wide lighting and sensing angles.

Figure 4: Durability features of the solar light.

3. Package Contents

Each 8-pack of Brightever Solar Outdoor Motion Sensor Wall Lights includes:

• 8 x Solar Outdoor Motion Sensor Wall Lights
• Mounting Hardware (screws and wall anchors)

4. Setup and Installation

The Brightever Solar Outdoor Motion Sensor Wall Lights are designed for easy, wire-free installation. For optimal performance, choose a location that receives direct sunlight for 6-8 hours daily to ensure the solar panel can fully charge the battery.

4.1 Recommended Installation Method: Screw Mounting

1. Select a suitable outdoor wall or surface where the light will receive maximum direct sunlight.
2. Use the provided screws and wall anchors to securely mount the light. Mark the positions for drilling, drill holes if necessary, insert anchors, and then fasten the light with screws.

4.2 Alternative Installation Methods (Hardware Not Included)

• Double-sided Adhesive: For smooth, clean surfaces, strong outdoor-grade double-sided adhesive can be used. Ensure the surface is thoroughly cleaned and dry before application.
• Rope Hanging: The lights can be hung using a durable rope or zip ties through the designated mounting holes, suitable for fences or railings.

Figure 5: Various installation methods for the solar light.

4.3 Installation Video Guide

5. Operating Instructions

Your solar light is equipped with a mode button to cycle through its three lighting settings. Ensure the light has been charged under direct sunlight for at least 6-8 hours before initial use.

1. Initial Activation: Upon first use, press the mode button to activate the light. It will typically start in Mode 1.
2. Mode Selection: Press the mode button repeatedly to cycle through the three available lighting modes:
   • Press 1 (Mode 1 - Stay-on Mode): Light turns on at 50% brightness at dusk and stays on until dawn or battery depletion.
   • Press 2 (Mode 2 - Dim Light Sensor Mode): Light stays dim at night. When motion is detected, it brightens to 100% for 15 seconds, then returns to dim.
   • Press 3 (Mode 3 - Strong Light Sensing Mode): Light remains off at night. When motion is detected, it turns on at 100% brightness for 15 seconds, then turns off completely.
   • Press 4: Turns the light off.
3. Automatic Operation: The light will automatically turn on at dusk and off at dawn, based on the selected mode.

6. Maintenance

To ensure the longevity and optimal performance of your Brightever Solar Outdoor Motion Sensor Wall Lights, follow these simple maintenance guidelines:

• Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures efficient sunlight absorption and battery charging.
• Check Mounting: Periodically inspect the mounting screws and the light's position to ensure it remains securely attached and optimally exposed to sunlight.
• Battery Care: While the battery is designed for long life, extreme temperatures can affect its performance. Ensure the light is installed in a location suitable for its operating temperature range.

7. Troubleshooting

If you encounter issues with your solar lights, please refer to the following common troubleshooting steps:

• Light Does Not Turn On at Night:
  • Ensure the solar panel is receiving at least 6-8 hours of direct sunlight daily. Relocate if necessary.
  • Check if the light is in the 'OFF' mode. Press the mode button to cycle through the modes.
  • Verify that the light is not installed near other strong light sources (e.g., streetlights), which might prevent the light sensor from activating the solar light.
• Light is Dim or Only Stays On for a Short Period:
  • The battery may not be fully charged. Ensure the solar panel is clean and receives adequate direct sunlight.
  • Consider the weather conditions. Cloudy or rainy days reduce charging efficiency.
  • The battery might be nearing the end of its lifespan. While not user-replaceable, this is a consideration after extended use.
• Motion Sensor Not Responding:
  • Ensure the light is in Mode 2 or Mode 3, as Mode 1 is a continuous low light.
  • Check for any obstructions blocking the sensor's field of view.
  • Verify that the motion is within the 16-foot detection range and 120° angle.

8. Specifications

9. Warranty and Support

Brightever provides a 1-Year Seller Warranty for this product, ensuring your satisfaction and peace of mind. If you encounter any issues or have questions regarding your solar lights, please contact Brightever customer support through your purchase platform for assistance.

For additional support or product information, please visit the official Brightever store: Brightever Store