BOXPUT BPSK3 Monitor Color Sync LED Lights User Manual

1. Introduction

The BOXPUT BPSK3 Monitor Color Sync LED Lights are designed to enhance your visual experience by providing dynamic backlighting that synchronizes with your screen content. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

This product is compatible with Windows PC and macOS, suitable for 22-32 inch monitors.

2. Package Contents

Verify that all items are present in your package:

• 1x USB PC LED Backlight Strip (2m / 6.56ft, 60 LEDs/m)
• 4x LED Strip Light Corner Connection Holders

Image: The BOXPUT BPSK3 product box, LED strip, USB cable with inline controller, and four corner connection holders.

3. Setup and Installation

Follow these steps for proper installation of your BOXPUT BPSK3 LED lights:

1. Prepare the Monitor Surface: Ensure the back of your monitor is clean and dry. Use an alcohol wipe if necessary to remove dust or oils, which can affect adhesive strength.
2. Attach Corner Holders: The kit includes CH1 LED strip connectors for perfect 90-degree connections. Apply the adhesive backing of these holders to the corners of your monitor. This ensures the light strip fits closely and securely.
3. Apply the LED Strip: Carefully peel the adhesive backing from the LED strip and press it firmly onto the back of your monitor, following the edges. Guide the strip through the corner holders.

Image: Illustration demonstrating the application of the LED strip to the monitor's rear, highlighting the use of corner connection holders.

4. Trim the LED Strip (if necessary): The LED strip can be trimmed to fit your 22-32 inch monitor. Locate the designated cut points on the strip (usually marked with a scissor icon or copper pads) and use scissors to cut only at these points.

Image: A person cutting the LED strip at a marked section to adjust its length.

5. Connect Power: Plug the USB connector of the LED strip into an available USB port on your PC or a 5V USB power adapter.
6. Install Software: To achieve color synchronization with your computer screen, download and install the "HiLighting" desktop application for Windows PC or macOS. You can typically find a QR code on the packaging or controller to access the manual and operating software.

Image: The product box displaying a QR code, indicating where to find the digital manual and software.

7. Configure Software: Open the "HiLighting" desktop application. The software automatically recognizes the number of LEDs. You will need to set the LED light strip direction (clockwise or counter-clockwise) and choose between three-side or four-side mode to match your installation.

Image: A monitor displaying the HiLighting desktop application interface, showing options for configuring the LED strip's direction and layout (three-sided or four-sided).

4. Operating Instructions

The BOXPUT BPSK3 LED lights offer multiple control methods:

• Desktop Application Control: Use the "HiLighting" desktop application on your PC or Mac to achieve real-time color synchronization with your screen content. This application allows for dynamic lighting effects that match your gaming or viewing experience.

Image: The HiLighting application interface on a laptop, showing options for device control, RGB sequence, number of LEDs, scene, monitor, mode, and backlight direction configuration. A mobile app interface is also shown for comparison.

• Mobile App Control: The "HiLighting" mobile application allows you to adjust colors, modes, and brightness. Note: The mobile app does not support color synchronization with the screen.

Image: The HiLighting mobile app interface displaying a color wheel and various color and mode selection options for the LED strip.

• Inline Controller: A physical button on the LED strip's USB cable allows you to cycle through different preset lighting functions and turn the lights on/off without needing the app.

5. Maintenance

To ensure the longevity and optimal performance of your BOXPUT BPSK3 LED lights:

• Keep the LED strips and control unit clean and free from dust. Use a soft, dry cloth for cleaning.
• Periodically check the adhesion of the LED strip and corner holders to ensure they remain securely attached to your monitor.
• Avoid exposing the LED strip to excessive moisture or extreme temperatures.

6. Troubleshooting

If you encounter issues with your BOXPUT BPSK3 LED lights, refer to the following common solutions:

• Lights not turning on: Ensure the USB cable is securely connected to a powered USB port (5V). Check if the inline controller button has been pressed to turn the lights on.
• Screen synchronization not working: Verify that the "HiLighting" desktop application is installed and running on your PC or Mac. Ensure the software configuration for the LED strip direction and mode is correctly set. Remember that mobile app control does not support screen synchronization.
• LED strip not adhering properly: Re-clean the monitor surface thoroughly before re-applying the strip. Ensure the surface is completely dry. For persistent issues, consider using additional adhesive or securing the corner holders more firmly.
• Software or operational issues: If you encounter any complex operational or usage issues that cannot be resolved with these steps, please contact BOXPUT Official Support for assistance.

7. Specifications

8. Warranty and Support

For specific warranty details, please refer to the documentation included with your purchase or contact your retailer. BOXPUT is committed to customer satisfaction.

If you require technical assistance or have questions regarding the operation of your BOXPUT BPSK3 LED lights, please contact BOXPUT Official Support. Our technical team is available to assist you with any operational or usage issues.

You can often find contact information on the product packaging or the official BOXPUT website.