Visiofire Tool-Free Laser Bore Sight Kit Instruction Manual

Introduction

The Visiofire Tool-Free Laser Bore Sight Kit is designed to assist in the accurate zeroing of firearms. This kit includes a red laser bore sighter and 64 adapters, providing compatibility with a wide range of calibers from .17 to 12 GA. This manual provides instructions for the proper setup, operation, and maintenance of your laser bore sight to ensure optimal performance and accuracy.

What's in the Box

Verify that all components are present before proceeding with setup.

• 1 x Red Laser Bore Sighter
• 64 x Adapters (for various calibers)
• 64 x Updated Screws
• 1 x Arbor
• 1 x Upgraded Suit Case
• 2 x Enhanced High-Capacity CR2 Batteries
• 1 x Adjustment Hexagonal Key
• 1 x Screwdriver

Setup Instructions

1. Install Batteries: Unscrew the rear cap of the laser bore sighter. Insert the two provided CR2 batteries with the positive (+) end facing forward (towards the laser emitter). Screw the cap back on securely.

   

2. Select Adapter: Identify the correct adapter for your firearm's caliber. Each adapter is marked with a serial number corresponding to a specific caliber range.
3. Attach Adapter: Insert the selected adapter onto the front of the laser bore sighter. The tool-free design allows for quick attachment by hand. Ensure the adapter is firmly seated.
4. Insert into Barrel: Carefully insert the bore sighter, with the attached adapter, into the muzzle of your unloaded firearm. Ensure the bore sighter is centered and stable within the barrel. The arbor can be used for added stability in larger calibers (5.56-12GA).
5. Activate Laser: Press the button on the side of the bore sighter to activate the red laser beam.

Operating Instructions

The laser bore sight provides a visual reference for initial zeroing of your firearm's optics or iron sights.

1. Secure Firearm: Place your unloaded firearm in a stable rest or vise, pointed towards a target at your desired zeroing distance (e.g., 25 yards for initial setup).
2. Activate Laser: Insert the bore sighter into the barrel and activate the laser. A red dot will project onto your target.
3. Adjust Sights/Optics: Adjust your firearm's scope, red dot sight, or iron sights until their reticle or aiming point aligns with the projected red laser dot on the target.

   

4. Verify Alignment: Once aligned, carefully remove the bore sighter from the barrel. It is recommended to perform live-fire adjustments at a shooting range to confirm and fine-tune your zero. The laser bore sight provides a starting point to get "on paper" quickly, saving ammunition.

Maintenance

• Cleaning: After each use, gently wipe the laser bore sighter and adapters with a clean, dry cloth to remove any residue or debris. Do not use harsh chemicals or abrasive materials.
• Battery Storage: For extended storage, remove the CR2 batteries from the bore sighter to prevent leakage and damage. Store batteries in a cool, dry place.
• Storage: Store the bore sight kit in its protective case in a dry environment, away from extreme temperatures and direct sunlight.

Troubleshooting

Specifications

• Brand: Visiofire
• Model Name: Laser Bore Sight Kit
• Color: Red Laser
• Material: Aluminum
• Compatible Devices: Shotgun, Handgun, Rifle
• Mounting Type: Insertion
• Reticle Type: Dot
• Laser Class: IIIA (less than 5mW)
• Battery Type: CR2 (2 included)
• Battery Life: Up to 72 hours continuous use
• Caliber Compatibility: .17 to 12 GA (with 64 included adapters)
• GTIN: 735812336695
• ASIN: B0D7T9877L

Warranty and Support

The Visiofire Laser Bore Sight Kit comes with a 2-Year Manufacturer Warranty. For warranty claims, technical support, or inquiries regarding product operation, please contact Visiofire customer service through the retailer's platform or the official Visiofire website. Please retain your proof of purchase for warranty validation.