VirtuFit VF13005

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

VirtuFit Rectangular Frame Pool User Manual

Model: VF13005

Introduction

Welcome to the VirtuFit Rectangular Frame Pool user manual. This guide provides essential information for the safe and efficient setup, operation, and maintenance of your new pool. Designed for durability and ease of use, this pool offers ample space for family and friends to enjoy refreshing swims throughout the summer. Please read this manual thoroughly before assembly and use to ensure a long-lasting and enjoyable experience.

VirtuFit Rectangular Frame Pool with filter pump

Image: The VirtuFit Rectangular Frame Pool, showcasing its sturdy frame and included filter pump system.

Safety Information

Always prioritize safety when using the pool. Failure to follow these instructions can result in serious injury or death.

  • Adult supervision is required at all times for children using the pool.
  • Do not dive or jump into the pool. The water depth is not sufficient for diving.
  • Keep electrical devices away from the pool area.
  • Ensure the pool is set up on a level, stable surface to prevent collapse.
  • Regularly check the pool for any signs of damage or leaks.
  • Do not allow pets into the pool, as their claws can damage the liner.
  • Always use the filter pump as instructed to maintain water quality.

Package Contents

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, contact VirtuFit customer support.

ItemQuantityDescription
Rectangular Pool Liner1Durable PVC material, 300 x 210 x 66 cm
Frame Poles (various lengths)SetGalvanized steel poles for frame construction
Corner Joints / ConnectorsSetPlastic or metal connectors for frame assembly
Filter Pump1Circulates and filters pool water (300 g/h capacity)
Filter Cartridge1Replacement cartridge for filter pump
Hoses and ClampsSetConnect filter pump to pool inlets/outlets
Drain Plug1For easy water drainage
Instruction Manual1This document

Setup

Follow these steps for quick and easy assembly of your VirtuFit pool.

  1. Site Selection: Choose a flat, level area in your garden, free from sharp objects, debris, or excessive slopes. Ensure there is adequate space around the pool for safe access and maintenance.
    Children running towards a VirtuFit pool in a garden

    Image: An example of a suitable outdoor location for the pool, showing children approaching it in a grassy area.

  2. Unpack and Lay Out Liner: Carefully unpack the pool liner and lay it out flat in your chosen location. Allow it to warm up in the sun for a short period to make it more pliable.
  3. Assemble the Frame:
    • Identify the different lengths of frame poles and connectors.
    • Connect the horizontal poles to the corner joints to form the rectangular top frame.
    • Insert the vertical support poles into the designated sleeves on the pool liner and connect them to the top frame.
    • Ensure all connections are secure and the frame is stable.
    Front view of the assembled VirtuFit Rectangular Frame Pool

    Image: The fully assembled VirtuFit Rectangular Frame Pool, demonstrating its stable structure.

  4. Install Filter Pump:
    • Attach the filter pump to the designated inlet and outlet connections on the pool liner using the provided hoses and clamps.
    • Ensure all connections are tight to prevent leaks.
    • Insert the filter cartridge into the pump housing as per the pump's specific instructions.
    Close-up of the VirtuFit filter pump

    Image: A detailed view of the VirtuFit filter pump, showing its connections.

  5. Fill the Pool: Begin filling the pool with water. As the water level rises, smooth out any wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended fill line, typically just below the top frame.

Operating

Using your VirtuFit pool is straightforward once set up. Follow these guidelines for optimal enjoyment.

Filter Pump Operation

The included filter pump is crucial for maintaining clean and clear water.

  • Connect the pump to a grounded electrical outlet.
  • Operate the filter pump for a minimum of 4-6 hours daily, or longer during heavy use, to ensure proper filtration.
  • Always turn off and unplug the pump before performing any maintenance or when people are in the pool.
Woman replacing filter cartridge in VirtuFit pool pump

Image: A woman demonstrating the process of replacing the filter cartridge in the pump.

Water Chemistry

Maintaining proper water chemistry is essential for hygiene and pool longevity.

  • Regularly test the water pH and chlorine levels using a pool test kit.
  • Adjust chemicals as needed to keep pH between 7.2 and 7.6, and chlorine levels within recommended ranges.
  • Consult a pool supply professional for specific chemical recommendations and safe handling procedures.

General Use

  • Rinse off before entering the pool to reduce contaminants.
  • Avoid sharp objects or rough play that could damage the liner.
  • Do not overcrowd the pool.
Family enjoying the VirtuFit Rectangular Frame Pool

Image: A family enjoying a refreshing swim in the VirtuFit Rectangular Frame Pool.

Maintenance

Regular maintenance will extend the life of your pool and ensure clean water.

Cleaning the Pool

  • Skimming: Use a pool skimmer net to remove leaves, insects, and other debris from the water surface daily.
  • Vacuuming: Periodically vacuum the pool floor to remove settled dirt and debris.
  • Wiping: Wipe down the pool liner walls with a soft brush or cloth to prevent algae buildup.

Filter Cartridge Care

  • Rinse the filter cartridge with a garden hose every few days, or more frequently if the pump flow rate decreases.
  • Replace the filter cartridge every 2-4 weeks, depending on usage and water quality.

Winterization (Seasonal Storage)

  • Completely drain the pool using the drain plug.
  • Clean and dry the pool liner thoroughly to prevent mold and mildew.
  • Disassemble the frame and store all components in a dry, protected area, away from extreme temperatures and pests.
  • Store the filter pump indoors in a dry, frost-free location.

Troubleshooting

Refer to this section for common issues and their solutions.

ProblemPossible CauseSolution
Water is cloudy/dirtyInsufficient filtration, dirty filter, improper chemical balanceRun pump longer, clean/replace filter cartridge, test and adjust water chemistry.
Pump not runningNot plugged in, power outage, tripped breaker, pump malfunctionCheck power connection, reset breaker, contact customer support if pump is faulty.
Water leaking from connectionsLoose clamps, damaged O-rings, improper hose connectionTighten clamps, inspect and replace O-rings if damaged, ensure hoses are properly seated.
Pool liner has a small punctureSharp object, wear and tearUse a vinyl repair kit (not included) to patch the hole.

Specifications

  • Model: VF13005
  • Dimensions (L x W x H): 300 x 210 x 67 cm (approx. 9.84 x 6.89 x 2.20 feet)
  • Material: Polychlorure de vinyle (PVC)
  • Shape: Rectangular
  • Color: Black/Grey
  • Filter Pump Capacity: 300 g/h (Note: This unit is unusual for pump flow rate, typically measured in GPH or L/H)
  • Assembly Required: Yes
  • Included Components: Pool liner, frame, filter pump, filter cartridge, hoses, clamps.

Warranty and Support

VirtuFit products are manufactured with high-quality materials and undergo strict quality control. For warranty information, technical support, or to order replacement parts, please contact VirtuFit customer service through their official website or the retailer where you purchased the product.

Website: www.virtufit.nl

Please have your model number (VF13005) and purchase date ready when contacting support.

© 2025 VirtuFit. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.