HALLOMOTOR DPC18 CAN Canbus Color Display User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the HALLOMOTOR DPC18 CAN Canbus Color Display. This display is designed for use with Bafang mid-drive electric bicycle motors that utilize the CAN protocol, including models such as M500, M600, M510, M560, M800, and M820. It offers a vibrant color screen for monitoring essential riding data and controlling motor settings. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your display.

2. Product Overview

The DPC18 CAN display enhances your electric bike experience by providing real-time information and control.

• CAN Protocol Compatibility: Specifically designed for Bafang M500, M600, M510, M560, M800, and M820 mid-drive motors using CAN protocol communication.
• Color Display: Features a vibrant color screen for clear visibility of speed, battery level, distance, and other motor settings.
• Plug and Play Connection: Equipped with a standard triangle plug for secure and straightforward integration with compatible motors.
• USB Charging Port: Includes a USB charging port for convenience.
• Enhanced User Experience: Serves as an upgrade or replacement for standard monochrome displays, offering more detailed information and control.

Image: The DPC18 CAN display unit, remote control, and mounting accessories included in the package.

3. Package Contents

Verify that all items are present in the package:

• DPC18 CAN Canbus Color Display Unit
• Remote Control Unit
• Mounting Bracket and Screws
• Bell

4. Setup and Installation

Follow these steps to properly install your DPC18 CAN display:

1. Mounting the Display:

   Attach the display mounting bracket to your bicycle's handlebars. The DPC18 CAN display uses a stem mount type. Secure the display unit into the bracket. Ensure the display is positioned for optimal visibility and does not obstruct steering or other controls.

   

   Image: Side view of the DPC18 CAN display showing its mounting position on bicycle handlebars.

2. Connecting the Cables:

   Locate the main cable from the DPC18 CAN display. Connect the 5-pin female triangle plug from the display to the corresponding male triangle plug on your Bafang mid-drive motor system. Ensure the connection is firm and secure. The display also features a USB charging port, visible from the rear of the unit.

   

   Image: Rear view of the DPC18 CAN display, highlighting the cable connections and the integrated USB charging port.

3. Mounting the Remote Control:

   Mount the remote control unit on your handlebars in a position that is easily accessible with your thumb while riding. Connect its cable to the appropriate port on the main display cable or motor system, if applicable.

   

   Image: Close-up of the DPC18 CAN remote control, showing the power, mode, and assist level buttons.

4. Initial Power On:

   After all connections are made, power on your e-bike system. The DPC18 CAN display should illuminate and show the initial startup screen. If it does not, refer to the troubleshooting section.

5. Operating Instructions

The DPC18 CAN display provides intuitive control over your e-bike's functions.

5.1. Basic Functions

• Power On/Off: Press and hold the power button on the remote control to turn the display on or off.
• Assist Level Adjustment: Use the '+' and '-' buttons on the remote control to increase or decrease the pedal assist level. The display supports PAS levels 0-9 (or 0-5-ECO depending on variant).
• Information Display: The color screen shows current speed, maximum speed, average speed, trip distance, total distance (odometer), battery charge level, and error codes.
• Mode Button: Press the 'i' (information) button to cycle through different display modes, showing various riding data.
• Walk Assist: Press and hold the '-' button to activate walk assist mode (if supported by your motor).
• Headlight Control: Press the headlight button (often integrated with the power button or a separate button) to turn your e-bike's lights on or off.

5.2. Settings Menu

Access the settings menu to customize display parameters and motor behavior. Specific access methods may vary; typically, it involves a combination of button presses (e.g., holding 'i' and '+' simultaneously). The display itself may also feature touchscreen input for navigation.

• Wheel Diameter: Set the correct wheel diameter for accurate speed and distance readings.
• Speed Unit: Switch between kilometers per hour (km/h) and miles per hour (mph).
• Battery Voltage: Configure the battery voltage to ensure accurate battery level indication.
• Backlight Brightness: Adjust the display's backlight intensity.
• Password Protection: Set a password for display access (if available).
• Error Code Display: View any active error codes from the motor system.

Refer to your Bafang motor's specific documentation for advanced motor parameter settings accessible via the display.

6. Maintenance

Proper care ensures the longevity and optimal performance of your DPC18 CAN display.

• Cleaning: Wipe the display screen and body with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which can damage the screen or casing.
• Water Exposure: The display is designed to be weather-resistant, but avoid submerging it in water or exposing it to high-pressure water jets. Ensure the USB port cover is securely closed when not in use.
• Cable Inspection: Periodically check all cables and connectors for signs of wear, damage, or loose connections. Ensure the triangle plug is always securely seated.
• Storage: When storing your e-bike for extended periods, especially in cold conditions, it is advisable to remove the battery and store it separately according to its manufacturer's instructions.

7. Troubleshooting

If you encounter issues with your DPC18 CAN display, refer to the following common problems and solutions:

If these steps do not resolve the issue, contact HALLOMOTOR customer support or a certified e-bike technician.

8. Specifications

9. Warranty and Support

The HALLOMOTOR DPC18 CAN display comes with a 1-year warranty. For warranty claims or technical support, please contact your retailer or HALLOMOTOR customer service.

Additional protection plans may be available for purchase:

• 2-Year Protection Plan: Available for a one-time payment.
• Complete Protect: A monthly subscription plan covering eligible past and future purchases.

For detailed information on protection plans, please refer to the terms and conditions provided at the time of purchase.