BOB AND BRAD H60 Hand Massager Instruction Manual

Introduction

The BOB AND BRAD H60 Hand Massager is designed to provide relief and relaxation for hands, fingers, and wrists through a combination of heat and air compression. This manual provides essential information for safe and effective use of your device.

Safety Information

Important Safety Guidelines:

• Avoid using near water or with wet hands.
• Do not use on broken or injured skin.
• Consult a healthcare professional if you have any health concerns before use.
• The 15-minute auto-shutoff feature prevents overuse.
• Even if the massager runs out of power during use, the airbags will immediately release pressure and retract automatically, ensuring your hand is never trapped inside.

Package Contents

• BOB AND BRAD H60 Hand Massager
• USB-C Charging Cable
• Storage Pouch
• 10 Hygienic Single-Use Moisturizing Gloves
• Dedicated Finger Massager
• User Manual

Product Overview

The H60 Hand Massager combines advanced features for comprehensive hand care.

360° Heating with NTC Technology

The device features 360° heating with NTC intelligent temperature control, providing 5-8 seconds fast heating to ensure a stable and comfortable 108°F heat. This system promotes blood circulation and muscle relaxation, targeting hand pain, arthritis, and carpal tunnel symptoms.

Image: The H60 Hand Massager illustrating 360-degree heating for deep relaxation, showing heat distribution across fingers, palm, and wrist.

Air Compression System

A three-section air compression system delivers gentle yet effective massage across the hand, fingers, and wrist. Unlike traditional roller massagers, this design is comfortable and less intrusive, operating below 50dB for a peaceful experience.

Image: Diagram showing the three-segment airbag system providing multi-dimensional compression to the fingers, palm, and wrist.

Customizable Massage Modes and Intensity

Choose from 3 massage modes (Health Care, Soothing, Energizing) and 3 adjustable intensity levels to personalize your massage experience. It adapts to your preferences for gentle touch or deep tissue relief.

Image: The control panel of the H60 Hand Massager, highlighting the three massage modes and three intensity levels, along with quiet operation.

Long Battery Life and USB-C Charging

Equipped with a 2200mAh battery, the massager offers extended usage. The USB-C charging port allows for quick charging (3-3.5 hours for a full charge), making it convenient for travel or daily use.

Image: The H60 Hand Massager connected to a USB-C charger, illustrating its long battery life and convenient charging.

Setup

1. Unpack: Carefully remove all components from the packaging.
2. Initial Charge: Fully charge the hand massager before using it for the first time. Connect the provided USB-C cable to the device and a suitable power adapter. The battery indicator will show charging status.
3. Familiarize: Read through the user manual to understand all features and controls.

Operating Instructions

1. Power On: Press and hold the power button for 3 seconds to turn on the device.
2. Hand Placement: Place your hand inside the massager, ensuring your fingers are properly positioned within the internal compartments.
3. Select Mode: Use the 'Mode' button to cycle through the 3 available massage modes: Health Care, Soothing, and Energizing.
4. Adjust Intensity: Use the 'Intensity' button to select your preferred compression level (low, medium, or high). It is recommended to start on the lowest intensity to acclimatize.
5. Activate Heat: Press the 'Heat' button to turn on the heating function for added relief. The device features 360° heating.
6. Cooling Fan: The massager includes a built-in cooling fan to prevent hands from becoming sweaty during use.
7. Timer: The device has a 15-minute auto-shutoff feature to prevent over-massage.
8. Power Off: Press and hold the power button to turn off the device when finished.
9. Moisturizing Gloves: For enhanced skin hydration, apply your preferred cream, wear one of the provided hygienic single-use moisturizing gloves, and then use the massager.
10. Finger Massager: Use the dedicated finger massager for targeted relief, stimulating joints, boosting circulation, and easing stiffness.

Image: Close-up of the H60 Hand Massager's control panel, showing the four independent buttons for easy operation.

Maintenance

• Cleaning: Wipe the exterior of the massager with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: Store the massager in the provided storage pouch in a cool, dry place away from direct sunlight.
• Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in constant use.

Troubleshooting

If you encounter any issues with your BOB AND BRAD H60 Hand Massager, please refer to the following common solutions:

• Device not turning on: Ensure the device is fully charged. Press and hold the power button for at least 3 seconds.
• No compression: Check that a massage mode is selected and the intensity level is set above zero. Ensure your hand is properly inserted.
• No heat: Verify that the heat function is activated via the 'Heat' button. Allow a few seconds for the heating element to warm up.
• Discomfort during massage: Reduce the intensity level. If discomfort persists, discontinue use and consult a healthcare professional.
• Hand feels trapped: The device has a fail-safe design where airbags automatically release pressure if power is lost. If this occurs, remove your hand gently.

For further assistance, please contact BOB AND BRAD customer support.

Specifications

Warranty and Support

• 2-Year Warranty: Built to last, backed for longer.
• 100% Satisfaction: Your happiness is our promise.
• US Customer Support: Real people, real help.

For any inquiries or support, please visit the official BOB AND BRAD website or contact their customer service directly.

Official Product Videos

Watch these official videos from BOB AND BRAD for demonstrations and additional information.