Oneach AMZ-T1189

Download PDF
Contents

Oneach 2 Pack Cordless Table Lamps

User Manual

Product Overview

The Oneach Cordless Table Lamps are designed for portability and versatility, offering a convenient lighting solution for various indoor and outdoor settings. Featuring a rechargeable battery, touch control, and stepless dimming with three color temperature options, these lamps provide adaptable illumination for any ambiance.

Its compact size and cordless design make it ideal for use on console tables, side tables, desks, or even during outdoor activities like camping, where electrical outlets are not readily available.

Two Oneach cordless table lamps with opal glass shades, one slightly in front of the other, on a light-colored surface with a plant in the background.

Image: Two Oneach cordless table lamps showcasing their design and portability.

What's in the Box

Upon opening your package, please ensure all components are present and in good condition:

  • Oneach Cordless Table Lamp (2 units for 2-pack)
  • USB Type-C Charging Cable
  • User Manual
  • Built-in Lithium Polymer Batteries (2 per lamp, included)
Contents of the Oneach table lamp package, including the lamp, charging cable, and user manual box.

Image: The Oneach table lamp, its packaging, and the included USB-C charging cable.

Setup Instructions

  1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
  2. Initial Charge: Before first use, fully charge the lamp. Connect the provided USB Type-C charging cable to the lamp's charging port and plug the other end into a compatible USB power adapter (not included). The indicator light will show charging status (e.g., red for charging, green for fully charged). A full charge can take several hours.
  3. Shade Assembly: The opal glass shade is pre-assembled. No additional assembly is typically required for the shade.
  4. Placement: Place the lamp on a stable, flat surface. Ensure it is not exposed to direct water or extreme temperatures, as it is not waterproof.

Operating Instructions

The Oneach Cordless Table Lamp features intuitive touch controls for ease of use.

  • Power On/Off: Lightly tap the touch sensor located on the lamp base to turn the lamp on or off.
  • Change Color Temperature: With the lamp on, short tap the touch sensor to cycle through the three available color temperatures: Warm Light, Neutral Light, and White Light.
  • Stepless Dimming: To adjust brightness, press and hold the touch sensor. The brightness will gradually increase or decrease. Release your finger when the desired brightness level is reached. The lamp supports stepless dimming, allowing for precise brightness control.
An illustration showing the three color temperature options (cold, warm, neutral light) and how to short touch to change color temperature and long touch to dim or brighten.

Image: Visual guide for changing light temperature and adjusting brightness via touch control.

A hand demonstrating the touch control on the base of the Oneach table lamp.

Image: Demonstrating the simple one-button touch operation for the lamp.

Maintenance

  • Cleaning: To clean the lamp, ensure it is turned off and disconnected from any charging cable. Use a soft, dry cloth to wipe down the metal base and glass shade. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or electronic components.
  • Battery Care: To prolong battery life, avoid fully discharging the lamp frequently. Recharge the lamp when the light output becomes noticeably dim. If storing the lamp for an extended period, charge it to approximately 50% capacity and recharge every 3-6 months to prevent deep discharge.
  • Storage: Store the lamp in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.Battery is fully discharged.Connect the lamp to a USB power source using the provided Type-C cable and allow it to charge for several hours.
Light output is dim or flickers.Low battery level.Recharge the lamp fully.
Cannot change color temperature or dim.Incorrect touch operation.Ensure you are using a short tap for color temperature and a press-and-hold for dimming. Ensure your finger is making good contact with the touch sensor.
Lamp does not charge.Faulty cable or power adapter; charging port issue.Try a different USB Type-C cable and a different USB power adapter. Ensure the cable is fully inserted into the lamp's port. If the issue persists, contact customer support.

Specifications

Model NumberAMZ-T1189
Product Dimensions5.9"D x 5.9"W x 9"H
Item Weight1.3 Pounds
Power SourceBattery Powered (3600mAh Lithium Polymer, included)
Light Source TypeLED
Switch TypeTouch
MaterialMetal base, Opal Glass Shade
ConnectivityUSB Type-C for charging
A diagram showing the dimensions of the Oneach table lamp: 5.9 inches deep, 5.9 inches wide, and 9 inches high.

Image: Detailed dimensions of the Oneach Cordless Table Lamp.

Warranty and Support

For warranty information or technical support, please contact Oneach customer service. Refer to the contact details provided in the product packaging or visit the official Oneach website.

Please have your product model number (AMZ-T1189) and purchase details ready when contacting support.

© 2025 Oneach. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.