Oneach AMZ-T1189

Oneach Cordless LED Mushroom Table Lamp User Manual

Model: AMZ-T1189

Introduction

Thank you for purchasing the Oneach Cordless LED Mushroom Table Lamp. This manual provides essential information for the safe and efficient operation of your new lamp. Please read it thoroughly before use and retain it for future reference.

Two Oneach Cordless LED Mushroom Table Lamps emitting warm light on a light-colored surface.

Figure 1: Oneach Cordless LED Mushroom Table Lamps (2-Pack)

Product Features

  • Portable Cordless Design: Lightweight and rechargeable, allowing for flexible placement without the need for electrical outlets. Ideal for various indoor and outdoor settings.
  • Long-Lasting Battery: Equipped with a built-in 3600mAh rechargeable battery, providing up to 48 hours of illumination at the lowest brightness setting and 9-10 hours at the highest.
  • Opal Glass Shade: Features a seamless, glossy white opal glass shade that provides a warm, diffused, and glare-free light for eye protection.
  • Touch Control & Stepless Dimming: Easily switch between 3 color temperatures (warm, neutral, white light) with a short touch. Long touch to infinitely adjust brightness.
  • Universal Type-C Charging: Conveniently recharges via a Type-C port. Includes a USB A to USB C charging cable. (Note: USB C-C cables are not supported).
Illustration showing the three light color temperatures: Cold Light, Warm Light, and Neutral Light, with touch controls for switching and dimming.

Figure 2: Stepless Dimming and Color Temperature Control

Package Contents

Please check the package contents upon receipt to ensure all items are present:

  • Oneach Cordless LED Mushroom Table Lamp(s) (Quantity as per purchase, e.g., 2 for 2-Pack)
  • USB A to USB C Charging Cable
  • User Manual
Image showing the product packaging, the lamp, the USB-C charging cable, and the user manual.

Figure 3: Package Contents and Product Dimensions

Setup

  1. Unpacking: Carefully remove the lamp and all accessories from the packaging.
  2. Initial Charge: Before first use, fully charge the lamp. Connect the provided USB A to USB C charging cable to the lamp's Type-C port and a compatible USB power adapter (not included). The charging indicator light (if present) will show charging status. A full charge typically takes 5-6 hours.
  3. Placement: Place the lamp on a stable, flat surface. Its cordless design allows for versatile placement in bedrooms, living rooms, dining rooms, or any desired location.
A hand holding the portable cordless lamp, with text indicating charging time of 5-6 hours and service time of 46-48 hours (minimum lumen) and 9-10 hours (neutral light).

Figure 4: Portable Design and Battery Life

Operating Instructions

The Oneach Cordless LED Mushroom Table Lamp features intuitive touch controls:

  • Power On/Off: Lightly tap the touch sensor located on the lamp base to turn the lamp on or off.
  • Change Color Temperature: With the lamp on, short touch the sensor to cycle through the three available color temperatures: Warm Light, Neutral Light, and Cold Light.
  • Adjust Brightness (Stepless Dimming): With the lamp on, press and hold the touch sensor. The brightness will gradually increase or decrease. Release your finger when the desired brightness level is reached.
A white Oneach lamp on a desk next to a laptop and a small plant, illustrating its use in a workspace.

Figure 5: Lamp in a Desk Setting

Maintenance

To ensure the longevity and optimal performance of your lamp, follow these maintenance guidelines:

  • Cleaning: Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or glass shade.
  • Battery Care: To preserve battery life, avoid fully discharging the lamp frequently. Recharge the lamp when the light becomes dim. If storing the lamp for an extended period, charge it fully every 3 months.
  • Storage: Store the lamp in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.Battery is depleted.
Touch sensor not activated correctly.
Charge the lamp fully using the provided USB cable.
Ensure you are touching the sensor firmly and directly.
Lamp light is dim or flickers.Low battery.
Incorrect brightness setting.
Recharge the lamp.
Press and hold the touch sensor to increase brightness.
Cannot change color temperature.Incorrect touch action.Ensure you are performing a short tap on the touch sensor to cycle through modes.
Lamp does not charge.Cable or adapter issue.
USB C-C cable used.
Try a different USB A to USB C cable or power adapter.
Only use USB A to USB C cables for charging. USB C-C cables are not supported.

Specifications

FeatureDetail
BrandOneach
Model NumberAMZ-T1189
Product Dimensions5.9"D x 5.9"W x 9"H
Item Weight1.3 Pounds
Lamp TypeTable Lamp
Shade MaterialGlass
Shade ColorWhite
Light Source TypeLED
Power SourceBattery Powered
Battery TypeLithium Polymer (3600mAh)
Charging PortType-C USB
Control MethodTouch
Special FeatureCordless, Dimmable, 3 Color Temperatures
Indoor/Outdoor UsageIndoor

Warranty and Support

For warranty information or technical support, please contact Oneach Home directly through their official channels or the retailer from whom you purchased the product. Please have your model number (AMZ-T1189) and purchase details ready when contacting support.

For additional information and product updates, you may visit the Oneach Store on Amazon.

© 2024 Oneach Home. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.