Peugeot Bistro Pepper and Salt Mill Set (Model BUN2657) - Instruction Manual

1. Introduction

Welcome to the world of enhanced culinary experiences with your new Peugeot Bistro Pepper and Salt Mill Set. Drawing inspiration from Peugeot's original 1874 design, these iconic mills capture the spirit of French culinary tradition while providing modern functionality. Proudly made in France, the Bistro mills bring the charm of classic French cafés into your home, making them a reliable choice for those who value both quality and craftsmanship in their cooking tools. This manual provides essential information for the setup, operation, and maintenance of your mills to ensure optimal performance and longevity.

2. Product Overview

The Peugeot Bistro Pepper and Salt Mill Set is designed for precision and durability. Key features include:

• Iconic Design: A timeless and world-renowned symbol of French cafés and bistros, reproducing the original Peugeot mill from 1874.
• Adjustable Grind Control: A knob on the head of each mill allows for customization of grind size, from very fine to coarse.
• Precision Mechanisms: Each mill is engineered specifically for its spice. The pepper mill features a two-stage grinding mechanism with an anti-corrosion treatment. The salt mill uses corrosion-resistant stainless steel for rock salt.
• Crafted Beechwood: Made with PEFC-certified wood from sustainably managed forests, coated with water-based paints.
• Flavor Enhancement: Designed to bring out the aromatic depth of spices by allowing precise grind adjustment.

Image 1: The Peugeot Bistro Pepper and Salt Mill Set, featuring a black pepper mill and an ivory salt mill.

3. Setup

3.1 Unpacking

Carefully remove the mills from their packaging. Inspect both mills for any signs of damage. Retain packaging for future storage or transport if needed.

3.2 Filling the Mills

1. Unscrew the top knob on the head of the mill.
2. Lift off the top section of the mill.
3. For the pepper mill, pour in peppercorns (maximum size 1/4 inch or 6mm).
4. For the salt mill, pour in dry rock salt (maximum crystal size of 2/5 inch or 4mm).
5. Replace the top section and screw the top knob back on securely.

4. Operating Instructions

4.1 Grinding Spices

To grind, simply hold the base of the mill and turn the top section clockwise. The internal mechanism will process the peppercorns or rock salt, dispensing freshly ground spice from the bottom.

4.2 Adjusting Grind Coarseness

The grind control knob on the head of the mill allows you to customize the coarseness of your grind:

• To achieve a finer grind, twist the knob clockwise to tighten it.
• To achieve a coarser grind, twist the knob counter-clockwise to loosen it.

Experiment with different settings to find the perfect grind for your culinary needs. A very finely ground pepper will intensify its spice, while a coarser grind will highlight its aromatic qualities.

5. Maintenance

5.1 Cleaning

• The mills are not dishwasher safe.
• To clean the exterior, wipe with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
• For the grinding mechanism, use a small brush to remove any residual spice particles.

5.2 Storage

Store your mills in a dry place away from direct sunlight and excessive humidity to preserve the quality of the beechwood.

6. Troubleshooting

• Issue: Mill not grinding or grinding inconsistently.
  • Ensure the mill is filled with the correct type and size of spice (peppercorns for pepper mill, rock salt for salt mill).
  • Check the grind coarseness setting. If it's too fine, it might feel jammed. Loosen the top knob slightly.
  • Clean the grinding mechanism to remove any lodged particles.
• Issue: Spice output is too coarse or too fine.
  • Adjust the grind control knob as described in Section 4.2. Tighten for finer, loosen for coarser.

7. Specifications

8. Warranty & Support

For warranty information and customer support, please refer to the official Peugeot website or contact your retailer. Peugeot products are known for their durability and craftsmanship, and support is available for any inquiries regarding your mill set.