1. Introduction
Thank you for choosing the KAFF ASHFORD Built-in Hob ASF 603. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read these instructions carefully before use and keep them for future reference.
The KAFF ASHFORD ASF 603 is a 60 CM built-in hob featuring three high-efficiency full brass burners, automatic electric ignition, and a flame failure device for enhanced safety. It is designed with an 8mm thick black toughened glass surface and ergonomic metal knobs.
Image 1.1: Overview of the KAFF ASHFORD Built-in Hob ASF 603, showcasing its sleek black toughened glass surface and three brass burners.
2. Safety Instructions
Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, burns, or injury.
- Ensure adequate ventilation in the kitchen area during operation.
- Do not store flammable materials near the hob.
- Keep children away from the appliance during use.
- Do not use abrasive cleaners or sharp objects on the glass surface.
- In case of a gas leak, immediately turn off the gas supply, open windows, and do not operate any electrical switches.
- Always use appropriate cookware for the burner size.
- Never leave cooking unattended.
3. Setup and Installation
Installation of this built-in hob should only be performed by a qualified technician or authorized service personnel to ensure safety and proper functioning. Incorrect installation can void the warranty.
3.1 Countertop Preparation
Ensure the countertop material is heat-resistant and stable. The hob requires a specific cutout dimension for proper fitting.
Image 3.1: Diagram illustrating the product dimensions and required inner cutting size for installation. The outer size is 600 x 520 mm (L x D), and the inner cutting size is 555 x 475 mm (L x D).
- Outer Size: 600 mm (Length) x 520 mm (Depth)
- Inner Cutting Size: 555 mm (Length) x 475 mm (Depth)
3.2 Gas Connection
Connect the hob to the gas supply according to local regulations and safety standards. Use appropriate gas hoses and fittings. Check for gas leaks using soapy water after connection.
3.3 Electrical Connection
The automatic electric ignition requires an electrical power supply. Ensure the voltage and frequency match the appliance requirements. Connect to a properly grounded outlet.
4. Operating Instructions
This section details how to safely and effectively use your KAFF ASHFORD Built-in Hob.
4.1 Burner Overview
Image 4.1: Close-up view of the three brass burners, including one triple-ring and two dual-ring burners, designed for high efficiency.
4.2 Ignition Procedure
- Place appropriate cookware on the pan support over the desired burner.
- Push down the corresponding control knob and turn it counter-clockwise to the maximum flame position (large flame symbol).
- The automatic electric ignition will spark, igniting the gas. Hold the knob down for a few seconds after ignition to allow the flame failure device to engage.
- Release the knob. If the flame extinguishes, repeat the process.
- Adjust the flame size by turning the knob between the maximum and minimum flame positions (small flame symbol).
Image 4.2: Detail of the ergonomic anti-slip metal control knobs, showing the symbols for ignition and flame adjustment.
4.3 Flame Failure Device (FFD)
Your hob is equipped with a Flame Failure Device (FFD) on each burner. This safety feature automatically cuts off the gas supply if the flame accidentally extinguishes, preventing gas leakage. It is crucial to hold the knob down for a few seconds after ignition to allow the FFD to heat up and activate.
4.4 Turning Off a Burner
To turn off a burner, turn the corresponding control knob clockwise until it clicks into the "OFF" position (dot symbol).
5. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your hob.
- Before Cleaning: Always ensure the hob is cool and disconnected from the power supply. Turn off the gas supply.
- Glass Surface: Clean the toughened glass surface with a soft cloth and a non-abrasive cleaner specifically designed for glass or ceramic hobs. Wipe spills immediately to prevent staining.
- Burners and Pan Supports: The brass burners and heavy-duty cast iron pan supports can be removed for cleaning. Wash them with warm soapy water and a soft brush. Ensure they are completely dry before reassembling.
- Control Knobs: The metal control knobs can be pulled off for cleaning. Wipe them with a damp cloth and dry thoroughly. Do not use harsh chemicals.
- Ignition Plugs: Keep the ignition plugs clean and free from food debris to ensure reliable ignition.
6. Troubleshooting
Refer to this section for common issues and their potential solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite. | No gas supply, power outage, dirty ignition plug, burner components not correctly assembled. | Check gas valve. Verify power supply. Clean ignition plug. Reassemble burner parts correctly. |
| Flame extinguishes after releasing knob. | Flame Failure Device (FFD) not engaged, knob not held long enough. | Hold the knob down for a few more seconds after ignition to allow the FFD to heat up. |
| Uneven or yellow flame. | Burner ports clogged, incorrect gas pressure. | Clean burner ports. Contact a qualified technician to check gas pressure. |
| Gas smell detected. | Gas leak. | Immediately turn off gas supply, open windows, do not operate electrical switches, and contact emergency services or a qualified technician. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | ASF 603 |
| Type | Built-in Hob / Hobtop |
| Size | 60 CM |
| Number of Burners | 3 (1 Triple Ring, 2 Dual Ring) |
| Burner Material | Full Brass |
| Ignition Type | Automatic Electric Ignition |
| Glass Type | 8mm Thick Black Tempered Glass |
| Knob Type | Ergonomic Design Anti Slip Metal Knob |
| Pan Support | Heavy Duty Cast Iron with integrated flame protector |
| Safety Feature | Full Flame Failure Device (FFD) |
| Outer Dimensions (L x D) | 600 mm x 520 mm |
| Inner Cutting Dimensions (L x D) | 555 mm x 475 mm |
| Item Weight | 20 Kilograms |
| Material (Body) | Stainless Steel |
8. Warranty Information
Your KAFF ASHFORD Built-in Hob ASF 603 comes with a manufacturer's warranty:
- Burners: 5 Year Warranty
- Comprehensive: 2 Year Warranty
Please refer to the included warranty card for detailed terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.
9. Customer Support
For any queries, technical assistance, or service requests regarding your KAFF ASHFORD Built-in Hob ASF 603, please contact KAFF customer care:
- Manufacturer: KAFF Appliances (I) Pvt. Ltd.
- Customer Care (Toll-Free): 18001802221
- Website: Visit the KAFF Store on Amazon