INFANS Travel Crib and Playpen User Manual

1. Introduction

This manual provides essential instructions for the safe and proper use, assembly, and maintenance of your INFANS Travel Crib and Portable Playpen. Please read all instructions carefully before assembly and use, and retain this manual for future reference.

The INFANS Travel Crib is designed to serve as both a comfortable bassinet for newborns and a secure playard for toddlers, offering a versatile solution for your child's resting and play needs. Its lightweight and foldable design makes it suitable for travel and easy storage.

Image: The INFANS Travel Crib shown in both its bassinet setup and as a folded unit with its carry bag.

2. Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Infants can suffocate in gaps between a mattress too small or too thick and product sides. NEVER add a mattress, pillow, comforter, or padding.
• Use ONLY the mattress/pad provided by the manufacturer.
• Always ensure the product is fully assembled and locked before placing a child inside.
• Do not use this product if any parts are missing, damaged, or broken. Contact INFANS for replacement parts and instructional literature if needed.
• Keep children away from the product during assembly and disassembly.
• This product is compliant with US CPSIA and ASTM Requirements, made from non-toxic materials, and free from BPA, PVC, Phthalates, Lead, Latex, and Formaldehyde.
• The stable trapezoidal design and non-slip feet enhance stability.

3. Package Contents

Verify that all components are present before beginning assembly:

• Travel Crib Frame (A)
• Carry Bag (B)
• Soft Mattress (C)
• Bassinet Fabric (D)
• Support Rods (E)

Image: All parts of the travel crib, including the main frame, mattress, bassinet, and carry bag, are shown before assembly.

4. Assembly Instructions

The INFANS Travel Crib is designed for quick and tool-free setup. Follow these steps for assembly:

4.1. Unfolding the Travel Crib

1. Remove the travel crib from its carry bag.
2. Unfasten the straps securing the folded mattress.
3. Unfold the mattress and set it aside.
4. Stand the folded crib frame upright.
5. Pull the top rails upwards and outwards until they lock into place. Ensure all four sides are securely locked. You should hear a 'click' sound.
6. Push down on the center of the floor until it lies flat.

4.2. Installing the Bassinet (for newborns)

For infants up to 20 pounds (approximately 0-6 months), the bassinet provides a raised sleeping surface.

1. Unzip the bassinet fabric (D) and unfold it.
2. Attach the bassinet fabric to the top rails of the crib using the integrated clips or zippers. Ensure it is securely fastened around the entire perimeter.
3. Insert the support rods (E) into the designated sleeves on the underside of the bassinet fabric to provide a firm base.
4. Place the soft mattress (C) onto the bassinet fabric. Secure it using the Velcro straps on the underside of the mattress, attaching them to the corresponding points on the bassinet base.

4.3. Converting to Playpen Mode (for toddlers)

For toddlers up to 33 pounds (approximately 6-36 months), the crib can be used as a playpen.

1. Remove the mattress (C) and bassinet fabric (D) from the crib.
2. Place the soft mattress (C) directly onto the bottom of the playpen. Secure it using the Velcro straps on the underside of the mattress, attaching them to the corresponding points on the playpen base.

4.4. Assembly Video Guide

Watch this video for a visual guide on how to install and set up your INFANS Travel Crib:

5. Operating Instructions

5.1. Using the Bassinet Mode

The bassinet mode is suitable for newborns and infants who cannot push up on their hands and knees, or weigh more than 20 pounds. This elevated position allows for easier access to your baby.

Image: A parent gently places a baby into the INFANS Travel Crib, configured in its double-layer bassinet design for comfortable sleeping.

5.2. Using the Playpen Mode

The playpen mode is for older infants and toddlers who can sit up or stand, up to 33 pounds. It provides a secure and spacious area for play and rest.

Image: A toddler stands happily inside the full mesh INFANS Baby Playpen, demonstrating its use for active play.

5.3. Side Zipper Door

The playpen features a convenient side zipper door, allowing older toddlers to crawl in and out independently under supervision. Ensure the zipper is fully closed when the child is inside and unsupervised.

Image: A baby crawls through the open side zipper door of the INFANS Travel Crib, illustrating easy access.

5.4. Indoor and Outdoor Use

The lightweight and portable design allows for use in various settings, both indoors and outdoors. Always ensure the crib is placed on a flat, stable surface.

Image: The INFANS Travel Crib is shown in two scenarios: outdoors on a lawn with a toddler, and indoors on a rug with an infant, highlighting its versatility.

6. Folding and Storage

To fold the travel crib for storage or transport:

1. Remove the mattress and any bassinet components.
2. Pull up on the center of the floor to disengage the locking mechanism.
3. Press the buttons on the top rails to release the locks, then push the rails downwards and inwards to fold.
4. Gather the folded frame and secure it with the mattress wrapped around it, using the attached straps.
5. Place the folded crib into the provided carry bag.

Refer to the assembly video in Section 4.4 for a visual demonstration of folding the crib.

7. Care and Maintenance

• The mattress cover is removable and machine washable for easy cleaning. Follow the care label instructions for washing.
• The fabric components of the crib can be spot cleaned with a damp cloth and mild soap. Allow to air dry completely.
• Regularly inspect the crib for any signs of wear, damage, or loose parts. Discontinue use if any issues are found and contact customer support.

Image: A baby rests on the washable and breathable mattress, highlighting the ease of cleaning for hygiene.

8. Troubleshooting

• Crib not locking properly: Ensure all top rails are pulled up firmly until they click into place. The center of the floor must be fully pushed down.
• Difficulty folding: Make sure the mattress and bassinet are removed. Pull the center of the floor up first, then release the top rail locks.
• Unstable: Verify that the crib is on a flat, level surface and all locking mechanisms are engaged.

9. Specifications

Image: Visual representation of the INFANS Travel Crib's dimensions when assembled and the carry bag's dimensions.

10. Warranty and Support

For warranty information, replacement parts, or customer support, please contact INFANS directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

For additional information or to explore other INFANS products, visit the INFANS Store.