HIRINTOL 3TNC78 3TNC78L 3TNC78E Engine
Contents
HIRINTOL Engine Full Gasket Kit Instruction Manual
Model: 3TNC78 3TNC78L 3TNC78E Engine
Product Overview
This HIRINTOL Engine Full Gasket Kit is a comprehensive set designed for engine repair and overhaul. It includes all necessary gaskets to ensure a proper seal within the engine system, preventing leaks of coolant or oil that could lead to engine damage or failure.
This kit is specifically engineered as a direct replacement for the following engine models and applications:
- Engine Models: Yanmar 3TNC78, 3TNC78L, 3TNC78E, 3TNC78L-RTBA
- Applications: Yanmar F180-P, F180D-P, F180DXP-P Tractor; CA240, CA250 Combine; Kobelco SK025, SK025-1

Figure 1: Overview of the complete HIRINTOL Engine Full Gasket Kit, showing various gasket types and seals included for a full engine overhaul.
Installation Guide
Proper installation of the gasket kit is crucial for the longevity and performance of your engine. While the kit is designed for easy installation, it is highly recommended that installation be performed by a qualified mechanic or an individual with extensive experience in engine repair.
Preparation
- Ensure the engine is completely cool before beginning any work.
- Disconnect the battery to prevent accidental starting or electrical issues.
- Drain all fluids (coolant, oil) from the engine as required for the specific repair.
- Carefully remove all components obstructing access to the areas where gaskets will be replaced. Keep track of all fasteners and small parts.
- Thoroughly clean all mating surfaces. Remove any old gasket material, carbon deposits, or corrosion. Surfaces must be clean, dry, and free of debris to ensure a proper seal.
Gasket Replacement
- Identify the correct gasket for each component using the provided kit. The kit includes gaskets for the cylinder head, intake manifold, exhaust manifold, oil pan, valve cover, and various seals.
- For the cylinder head gasket, ensure the correct orientation. The head gasket is a critical component for sealing combustion chambers and coolant/oil passages.
- Apply a thin, even coat of appropriate gasket sealant if recommended by the engine manufacturer (refer to your engine's service manual). Some gaskets are designed to be installed dry.
- Carefully position each new gasket onto its respective mating surface. Ensure proper alignment with bolt holes and fluid passages.
- Reinstall components, tightening fasteners to the manufacturer's specified torque settings and sequence. Incorrect torque can lead to gasket failure or component damage.
- Pay special attention to oil seals, such as crankshaft and camshaft seals, ensuring they are installed without damage and seated correctly.

Figure 2: Detailed view of the cylinder head gasket, highlighting its precision design for optimal sealing of combustion and fluid passages.

Figure 3: A selection of various gaskets and seals included in the kit, demonstrating the comprehensive nature of the overhaul set.

Figure 4: Example of oil seals from the kit, essential for preventing oil leaks from rotating engine components.
Post-Installation
- Refill engine fluids (oil, coolant) to the correct levels.
- Reconnect the battery.
- Start the engine and allow it to reach operating temperature. Carefully inspect for any signs of leaks around the newly installed gaskets.
- Monitor fluid levels and engine performance closely during the first few hours of operation.
Operating Principles
Once correctly installed, the HIRINTOL Engine Full Gasket Kit functions as a critical sealing component within your engine. Gaskets are designed to fill microscopic imperfections between mating surfaces of engine components, creating a leak-proof barrier.
- Head Gasket: Seals the combustion chambers, preventing combustion gases from escaping and coolant/oil from mixing or leaking into the cylinders.
- Manifold Gaskets: Seal the intake and exhaust manifolds to the cylinder head, ensuring proper air/fuel mixture delivery and exhaust gas evacuation.
- Oil Pan Gasket: Prevents oil from leaking from the engine's oil reservoir.
- Valve Cover Gasket: Seals the valve cover to the cylinder head, preventing oil leaks from the top of the engine.
- Oil Seals: Prevent oil leakage around rotating components like the crankshaft and camshaft.
The high-quality materials used in this kit are designed to withstand the extreme temperatures, pressures, and chemical environments found within an engine, ensuring durable and reliable sealing performance.
Maintenance
Gaskets themselves do not require routine maintenance. Their primary function is to provide a long-lasting seal. However, regular engine maintenance practices contribute to the overall health of your engine and the longevity of its components, including gaskets.
- Fluid Checks: Regularly check engine oil and coolant levels. Sudden drops in fluid levels can indicate a leak, potentially from a gasket.
- Visual Inspection: Periodically inspect the exterior of the engine for any signs of oil or coolant leaks, especially around gasketed areas. Early detection of a minor leak can prevent more significant issues.
- Temperature Monitoring: Ensure your engine's cooling system is functioning correctly to prevent overheating, which can severely damage gaskets, particularly the head gasket.
Troubleshooting
If you experience issues after installing the gasket kit, it is important to diagnose the problem correctly. Common issues related to gasket failure or improper installation include:
Symptoms of Potential Gasket Issues
- Fluid Leaks: Visible puddles or drips of oil or coolant under the engine. This is the most common sign of a failed or improperly seated gasket.
- Overheating: A failing head gasket can lead to coolant loss or combustion gases entering the cooling system, causing the engine to overheat.
- White Smoke from Exhaust: Indicates coolant burning in the combustion chamber, often due to a blown head gasket.
- Blue Smoke from Exhaust: Suggests oil burning, which could be due to valve stem seal issues or other internal oil leaks.
- Reduced Engine Performance: Compression loss due to a faulty head gasket can lead to misfires, rough idling, and decreased power.
- Contaminated Fluids: Oil in coolant (milky coolant) or coolant in oil (milky oil on dipstick or oil filler cap) indicates a severe internal gasket failure, typically the head gasket.
Troubleshooting Steps
- Visual Inspection: Re-inspect all gasketed areas for visible signs of leaks. Check for loose bolts or improper seating.
- Pressure Test: A cooling system pressure test can help identify coolant leaks. A cylinder compression test or leak-down test can pinpoint head gasket issues.
- Professional Diagnosis: If you are unsure about the cause of the problem, or if symptoms persist, consult a professional mechanic. Engine repair requires specialized tools and knowledge.
Specifications
| Attribute | Detail |
|---|---|
| Part Type | Full Head Gasket Set, Overhaul Gasket Set, Full Engine Gasket Kit |
| Fuel Type | Diesel |
| Material | Metal, Plastic, PPC |
| Engine Model Compatibility | Yanmar 3TNC78, 3TNC78L, 3TNC78E, 3TNC78L-RTBA |
| Application Compatibility | Yanmar F180-P, F180D-P, F180DXP-P Tractor; CA240, CA250 Combine; Kobelco SK025, SK025-1 |
| Item Weight | 3 pounds |
| Package Dimensions | 1.97 x 1.57 x 1.18 inches |
| Manufacturer Part Number | 3TNC78 3TNC78L 3TNC78E Engine |
| Brand | HIRINTOL |
| Manufacturer | HIRINTOL |
Warranty Information
This HIRINTOL Engine Full Gasket Kit comes with a 6-month warranty period from the date of purchase. During this period, if any problem arises with the product due to manufacturing defects or material flaws, repair or replacement service will be provided.
Please retain your proof of purchase for warranty claims. The warranty covers the product itself and does not extend to damage caused by improper installation, misuse, accident, or normal wear and tear.
Customer Support
At HIRINTOL, we are committed to providing you with a good buying experience and excellent after-sales service. Our parts are manufactured and tested according to original factory specifications to ensure reliability.
For any inquiries, technical assistance, or warranty claims, please contact our customer support team. We strive to offer fast and reliable support.
You can visit the official HIRINTOL store for more information and products: HIRINTOL Store on Amazon.
Note: The amount charged for this product covers the product, shipping, and handling. Any custom or import tax is the buyer's responsibility.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.