NCLTHS C60-1200LBS Access Control System Kit User Manual

1. Introduction

The NCLTHS C60-1200LBS Door Access Control System Kit provides a comprehensive solution for secure and convenient access management. This system features an electromagnetic lock, RFID keypad, remote controls, power supply, and a push-to-exit button, offering multiple authorization methods and streamlined entry/exit processes. It is designed for easy installation and is suitable for various access control scenarios.

2. What's Included

Your NCLTHS C60-1200LBS Access Control System Kit includes the following components:

• 1 x Access control keypad
• 1 x 1200LBS electric magnetic lock
• 1 x Power supply control
• 1 x Push to exit button
• 1 x Doorbell Chime
• 2 x Remote Transmitter
• 1 x Remote Receiver
• 5 x RFID ID Card
• 1 x English user manual

3. System Components Overview

Access Control Keypad

Used for password and RFID card access.

1200LBS Electric Magnetic Lock

Provides strong security for door access.

Power Supply Control

Regulates power for the entire system.

Push to Exit Button

Allows for easy exit from the secured area.

Doorbell Chime

Provides an audible alert for visitors.

Remote Transmitter & Receiver

Enables remote unlocking of the door.

4. Installation Guide

Follow these steps carefully to install your NCLTHS Access Control System Kit. For a visual guide, please refer to the installation video below.

4.1. Wiring the Access Control Machine to Power Supply

First, connect the access control machine to the power supply. Identify the four colors of wires: red, black, gray, and yellow. Connect the black and gray wires together in series, then connect them to the GND terminal of the power supply. Locate the red wire and connect it to the +12V terminal. Connect the yellow wire to the PUSH terminal.

Image Description: A detailed wiring diagram showing connections between the access control machine, power supply, remote control module, doorbell, and push-to-exit button.

4.2. Connecting the Remote Control Module

The remote control module has five ports, but only four are needed: -, +, NO, COM. Find the "+" (blue) wire and connect it to the COM port. Then, connect the brown wire to the blue wire in series. After this, connect it to the GND terminal on the power supply. Locate the "+" terminal (green wire) on the module and connect it to the +12V terminal. The red wire is also connected to the +12V terminal. Then locate the NO port, represented by the orange wire, and also connect it to the PUSH terminal on the power supply.

4.3. Connecting the Doorbell

The doorbell also has four wires. Connect the red wire to the +12V terminal on the power supply. Connect the black wire to the GND terminal. Then, connect the green and yellow wires to the white wires of the access control machine.

4.4. Connecting the Push-to-Exit Button

The push-to-exit button does not have polarity. Connect one wire from the button to the GND terminal on the power supply, and the other wire to the PUSH terminal.

4.5. Connecting the Magnetic Lock

The magnetic lock has two terminals: one is U+ and the other is U-. Connect U+ (brown wire) to NC (Normally Closed) on the power supply, and U- (blue wire) is connected to GND.

5. Operating Instructions

5.1. Keypad Operation

Use the numeric keypad to enter your access code. The system will grant access upon correct code entry.

5.2. RFID Card Access

Present a registered RFID card to the keypad reader. The system will unlock the door if the card is authorized.

5.3. Remote Control Operation

Press the unlock button on the remote transmitter to remotely open the door. Ensure you are within the effective range of the remote receiver.

5.4. Push-to-Exit Button

From the inside, simply press the push-to-exit button to unlock the door for egress.

6. Maintenance

• Caution: Do not fix the screw of the armature plate too tight as this will result in weak suction of the lock. Please loosen the screw a little bit.
• Proper elasticity should be guaranteed for the rubber ring so that the armature plate can adjust itself to the appropriate position.
• Please keep the surface of the lock clean, or the force will be reduced because of the dust, glue or scotch tape on it.
• Regularly check all wiring connections to ensure they are secure and free from damage.
• Keep the keypad and magnetic lock free from dust and debris.

7. Troubleshooting

8. Specifications

• Brand: NCLTHS
• Model: C60
• Power Source: Corded Electric
• Voltage: 12 Volts
• Material: Aluminum
• Item Dimensions (L x W x H): 12 x 8 x 3.5 inches
• Item Weight: 9 Pounds
• Connectivity Technology: Wired
• Installation Type: Self-Adhesive, Screw-In
• Control Method: Remote
• Special Features: Auto-Lock

9. Warranty and Support

For warranty information or technical support, please contact NCLTHS customer service through the retailer's platform or visit our official website. Please retain your proof of purchase for warranty claims.