Tribesigns 70.9-Inch Extra Long Console Table (Model RY0102) Instruction Manual

1. Introduction

Thank you for choosing the Tribesigns 70.9-Inch Extra Long Console Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Caution: Lift the table carefully due to its weight. It is recommended that two people lift the tabletop during assembly.
• Assemble with care to avoid injury. Ensure all parts are correctly aligned before tightening screws.
• Be aware of pinch points when placing items on the table, especially in narrow spaces.
• Always follow recommended uses and weight limits for safe and stable usage. The maximum weight recommendation for this table is 300 pounds.
• Do not stand or climb on the table.
• Keep small parts away from children during assembly.

3. Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.

• Tabletop (Engineered Wood)
• Bicycle-shaped Metal Base components
• Assembly Guide
• Installation Tool (Hex Key/Allen Wrench)
• Hardware Kit (screws, bolts, washers, adjustable foot pads)

4. Assembly Instructions

Assembly is recommended for one person. A screwdriver may be required in addition to the included installation tool.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the included assembly guide for a detailed list of numbered parts and hardware.
2. Assemble the Metal Base: Connect the various sections of the bicycle-shaped metal base using the provided screws and the installation tool. Ensure all connections are secure but do not fully tighten until the entire base is assembled.
3. Attach Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of the metal base. These will help stabilize the table on uneven surfaces and protect your floor.
4. Position the Tabletop: Carefully place the engineered wood tabletop onto the assembled metal base. The tabletop is 1.18 inches thick and may consist of two pieces. Align the pre-drilled holes in the tabletop with the holes on the metal frame.
5. Secure the Tabletop: Attach the tabletop to the metal base using the remaining screws. Once all screws are in place, gradually tighten all fasteners on both the base and the tabletop until secure. Avoid overtightening.

Assembly Tip: The tabletop may come in two pieces. Ensure proper alignment during installation. If dowels are provided and cause misalignment, it may be possible to omit them if the screws provide sufficient stability, as noted by some users. Always ensure all connections are firm.

Image: Detail of the 1.18-inch thick board, sturdy metal base, and adjustable footpad for stability.

Image: Product dimensions diagram, illustrating the table's length, width, and height.

5. Usage

This console table is designed for indoor residential use and offers versatile functionality.

• Placement: Ideal for use as a sofa table, entry table, hallway table, foyer table, or even a TV stand. Its narrow design is suitable for spaces behind couches or along walls.
• Display Space: The 70.87" L x 11.81" W x 33.46" H surface provides ample space for displaying decorative items such as photographs, books, lamps, art pieces, and potted plants.
• Weight Capacity: The table has a maximum weight recommendation of 300 pounds. Distribute weight evenly across the surface.

Image: Console table positioned behind a sofa, demonstrating its use as a sofa table.

Image: Console table serving as an entryway table, enhancing the decor.

6. Care and Maintenance

To ensure the longevity and appearance of your console table, follow these care instructions:

• Cleaning: Wipe the surface with a damp cloth for general cleaning. Follow with a dry cloth to remove any moisture.
• Stain Resistance: The engineered wood tabletop is designed to be stain-resistant. Clean spills promptly to prevent potential staining.
• Protection: Avoid placing hot items directly on the surface. Use coasters or protective pads as needed.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

If you encounter any issues during or after assembly, refer to the following common solutions:

• Parts Not Lining Up: Double-check the assembly guide to ensure all parts are oriented correctly. Sometimes, a piece may appear similar but needs to be rotated or flipped. Loosen all screws slightly, adjust the alignment, and then retighten.
• Table Wobbles: Ensure all screws are fully tightened. Adjust the foot pads on the bottom of the metal base to compensate for uneven flooring. Turn each foot pad clockwise or counter-clockwise until the table is stable.
• Missing Hardware: Refer to the package contents list. If any hardware is missing, contact Tribesigns customer service for assistance.

8. Specifications

9. Warranty and Support

Tribesigns provides an 18-month warranty for this product. For any questions, concerns, or assistance with assembly or parts, please contact Tribesigns customer service. Our customer service team is available to provide support.

Please refer to your purchase documentation for specific contact details or visit the official Tribesigns website.