uxcell Leather Drawer Pulls (128mm, Black/Gold) Instruction Manual

1. Introduction

Thank you for choosing uxcell Leather Drawer Pulls. These pulls are designed to enhance the aesthetic and functionality of your furniture. Made from durable leather and zinc alloy, they offer a comfortable grip and a retro-inspired look suitable for various interior styles.

2. Package Contents

Please verify that all items listed below are included in your package:

• 6 x Leather Drawer Pulls (Black/Gold, 128mm Hole Spacing)
• 12 x Mounting Screws

Image: Overview of the uxcell Leather Drawer Pulls included in the package.

3. Product Dimensions

Refer to the following dimensions for proper fit and installation:

• Total Size (L*W): 17 x 2.5 cm (7 x 1 inch)
• Hole Spacing (Center to Center): 128 mm (5 inch)

Image: Detailed dimensions of the uxcell Leather Drawer Pull.

4. Setup and Installation

Follow these steps to install your new leather drawer pulls:

1. Prepare the Surface: Ensure the furniture surface where the pulls will be installed is clean and dry.
2. Mark Installation Points: Using a ruler and pencil, accurately mark the desired location for each pull. The hole spacing for these pulls is 128 mm (5 inches).
3. Drill Pilot Holes (if necessary): If your furniture does not have pre-drilled holes, carefully drill pilot holes at the marked points. Ensure the drill bit size is appropriate for the provided screws to prevent splitting the wood.
4. Attach the Pulls: Align the leather pull with the drilled holes. Insert the provided screws from the inside of the drawer/cabinet door through the holes and into the pull.
5. Secure the Pulls: Using a screwdriver, tighten the screws firmly until the pull is securely attached to the furniture. Avoid over-tightening, which can damage the leather or the furniture.

Important: Prior to installation, ensure that the screws are fastened securely to prevent any loosening over time.

Image: Components of the drawer pull, including the polished zinc alloy and screws.

5. Operating Instructions

Once installed, the uxcell Leather Drawer Pulls function as standard furniture handles. Simply grasp the pull and apply gentle force to open or close your drawers, wardrobes, cupboards, or other furniture items. The soft leather provides a comfortable grip.

6. Maintenance

To ensure the longevity and appearance of your leather drawer pulls, follow these maintenance guidelines:

• Cleaning: Wipe the leather and metal parts with a soft, dry cloth. For light dirt, a slightly damp cloth can be used on the leather, followed immediately by a dry cloth.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the leather and the polished zinc alloy finish.
• Periodical Check: Periodically check the tightness of the mounting screws. If any pull feels loose, gently tighten the screws to ensure a secure fit.
• Leather Care: To maintain the leather's suppleness, a small amount of leather conditioner can be applied occasionally, following the conditioner's instructions.

7. Troubleshooting

If you encounter any issues with your drawer pulls, refer to the following common solutions:

• Pull feels loose: The mounting screws may have loosened over time. Gently tighten the screws with a screwdriver until the pull is secure. Do not overtighten.
• Scratches or wear on leather: Minor scratches can sometimes be buffed out with a soft cloth. For significant wear, consider applying a leather repair product suitable for the material.
• Difficulty installing: Ensure the marked hole spacing on your furniture matches the 128mm spacing of the pulls. Verify that the pilot holes (if drilled) are the correct size for the screws.

8. Specifications

9. Warranty and Support

For information regarding product warranty or customer support, please refer to the retailer's return policy or contact uxcell directly through their official channels. Specific warranty details are not provided in this manual.