Introduction
Thank you for choosing the Altec Lansing HydraMOTION 2.0 Wireless Bluetooth Speaker. This speaker is designed for durability and high-quality audio, featuring an IP67 waterproof rating, long battery life, and dynamic RGB lighting. This manual provides essential information for setting up, operating, and maintaining your speaker.
The Altec Lansing HydraMOTION 2.0 Wireless Bluetooth Speaker in Purple/White, showcasing its design and controls.
Setup
What's in the Box
- Altec Lansing HydraMOTION 2.0 Speaker
- USB-C Charging Cable
- Mounting Accessory
- Quick Start Guide
Charging the Speaker
Before first use, fully charge your speaker. Connect the provided USB-C cable to the charging port on the speaker and to a compatible USB power source. The LED indicator will show charging status. A full charge takes approximately 4 hours and provides up to 16 hours of playtime.
Power On/Off
To power on the speaker, press and hold the power button (⏻) located on the control panel until you hear an audible prompt. To power off, press and hold the power button again.
Detailed view of the speaker's control panel, showing power, pairing, light mode, and volume buttons.
Bluetooth Pairing
- Ensure the speaker is powered on and in pairing mode (indicated by a flashing blue LED).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "HydraMOTION 2.0" from the list.
- Once connected, the LED will turn solid blue, and you will hear a confirmation tone.
The speaker has a Bluetooth range of up to 100 feet.
Mounting the Speaker
The HydraMOTION 2.0 speaker is designed to be mountable. Use the included mounting accessory to attach it to various surfaces like bike handlebars or other compatible mounts. Ensure the speaker is securely fastened before use.
The speaker shown with its included mount, ready for attachment to various equipment.
The HydraMOTION 2.0 speaker securely mounted on a bicycle frame, demonstrating its portability.
Operation
Basic Controls
- Volume Up/Down: Press the '+' or '-' buttons.
- Play/Pause: Press the play/pause button (▶‖).
- Track Skip: Press and hold '+' for next track, '-' for previous track.
- Voice Assistant: Press the microphone button (🎤) to activate your device's voice assistant.
Hyper-Edge Multicolor Lighting Modes
The speaker features dynamic RGB lighting. Press the light mode button (✱) to cycle through different lighting effects and colors. Choose the mode that best suits your environment or mood.
The speaker displaying its Hyper-Edge multicolor lighting modes, enhancing the audio experience.
Party Sync (Multi-Speaker Pairing)
For an expanded audio experience, you can connect over 100 HydraMOTION 2.0 speakers together. Refer to the detailed instructions in the Quick Start Guide for multi-speaker pairing. This feature allows for synchronized audio across a large area.
An array of Altec Lansing Hydra speakers, including the HydraMOTION 2.0, demonstrating the multi-speaker pairing capability.
Waterproof and Durable Design
The HydraMOTION 2.0 is IP67 rated, making it waterproof, dustproof, and shockproof. It is also designed to float in water, making it ideal for outdoor and aquatic environments. Ensure the charging port cover is securely closed to maintain its waterproof integrity.
The speaker on grass, being splashed with water, highlighting its waterproof design.
Official video demonstrating the Altec Lansing HydraMotion 2.0 Waterproof Bluetooth Speaker's features and durability.
Maintenance
Cleaning
To clean your speaker, use a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the speaker's finish and waterproof seals. Ensure the charging port cover is closed during cleaning.
Storage
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
Troubleshooting
| Problem | Solution |
|---|---|
| Speaker does not power on | Ensure the battery is charged. Connect the speaker to a power source using the USB-C cable. |
| No sound from speaker | Check the volume level on both the speaker and your connected device. Ensure the speaker is properly paired via Bluetooth. |
| Unable to pair via Bluetooth | Make sure the speaker is in pairing mode (flashing blue LED). Turn off and on Bluetooth on your device, then try pairing again. Move closer to the speaker (within 100ft range). |
| Lights are not working | Press the light mode button (✱) to cycle through the lighting options. Ensure the speaker has sufficient battery charge. |
| Sound distortion | Reduce the volume on both the speaker and your device. Ensure your device is within Bluetooth range. |
Specifications
- Model Name: HydraMOTION 2.0
- Connectivity: Bluetooth (Wireless)
- Bluetooth Range: 100 Feet
- Waterproof Rating: IP67 (Waterproof, Dustproof, Shockproof, Floatable)
- Battery Life: Up to 16 hours
- Charging: USB-C Quick Charge
- Speaker Output Power: 6 Watts (Dual drivers)
- Special Features: Built-in Microphone, Hyper-Edge Multicolor Lighting Modes, Party Sync (connects 100+ speakers), Mountable
- Dimensions: 3.5"D x 3.5"W x 10.25"H
- Weight: 1.98 pounds
- Material: Acrylonitrile Butadiene Styrene (ABS), Polyvinyl Chloride (PVC)
Warranty & Support
Warranty Information
This product comes with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official Altec Lansing website for detailed warranty terms and conditions.
Customer Support
For further assistance, technical support, or product inquiries, please visit the Altec Lansing official website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's website.
