Feyree EV Charger User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Feyree EV Charger. Please read this manual thoroughly before installation and use, and retain it for future reference.

The Feyree EV Charger is designed for electric vehicle charging, offering various power capacities including 7kW, 11kW, and 22kW models. It features an intelligent chip for monitoring charging conditions, Wi-Fi connectivity for remote control via the Tuya Smart App, and multiple safety protections.

2. Safety Information

Always adhere to local electrical codes and regulations. Installation should only be performed by a qualified electrician.

• Do not attempt to open, disassemble, or modify the charger.
• Ensure the charger is properly grounded.
• Do not use the charger if the cable or connector is damaged.
• Keep the charger away from flammable materials, water, and extreme temperatures.
• Disconnect power before performing any maintenance or cleaning.

3. Product Overview

The Feyree EV Charger consists of the main charging unit, an integrated charging cable, and a Type 2 connector. The unit features a display screen and control buttons for operation, along with LED indicators for charging status.

Figure 3.1: Front view of the Feyree EV Charger, showing the main unit, attached charging cable, and Type 2 connector.

Figure 3.2: Vertical view of the Feyree EV Charger, illustrating its wall-mounted design and cable routing.

4. Setup and Installation

The EV charger is designed for wall-mounted installation. It is crucial that all electrical connections are made by a certified electrician to ensure safety and compliance with local regulations.

4.1 Mounting the Charger

1. Select a suitable indoor or outdoor location, ensuring it is protected from direct sunlight and heavy rain, though the unit is IP65 rated.
2. Mark the drilling points on the wall using the provided mounting template.
3. Drill holes and insert wall plugs.
4. Secure the charger to the wall using appropriate screws.

4.2 Electrical Connection

WARNING: Electrical installation must be performed by a qualified professional. Incorrect wiring can lead to serious injury or damage.

• Ensure the main power supply is turned off before beginning any wiring.
• Connect the input power cable to the charger's terminal block according to the wiring diagram provided in the full installation guide (not included in this manual).
• Verify all connections are secure and correct.
• Turn on the main power supply. The charger's display should illuminate.

5. Operating Instructions

5.1 Basic Charging Process

1. Ensure the charger is powered on.
2. Connect the Type 2 charging connector to your electric vehicle's charging port.
3. The charger will initiate a self-check. Once ready, charging will begin automatically or after authentication (if RFID card is used).
4. Monitor the charging status via the LED indicators on the control box or the display screen.
5. To stop charging, disconnect the connector from the vehicle. Some vehicles may require unlocking the charging port first.

5.2 Tuya Smart App Control

The charger supports remote control and monitoring via the Tuya Smart App.

• Download the "Tuya Smart" app from your mobile device's app store.
• Register an account and log in.
• Follow the in-app instructions to add your EV charger device. This typically involves putting the charger into pairing mode (refer to the charger's display or a dedicated button).
• Once connected, you can:
  • Monitor charging status, voltage, current, and power consumption.
  • Start or stop charging remotely.
  • Adjust the charging current (8A/10A/13A/16A/25A/32A).
  • Schedule charging times.
  • Receive notifications when charging is complete.

5.3 RFID Card Function

For models equipped with RFID functionality, charging can be initiated or authorized using a registered RFID card. Present the RFID card to the designated area on the charger to start or stop a charging session.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your EV charger.

• Cleaning: Use a soft, damp cloth to clean the exterior of the charger. Do not use abrasive cleaners or solvents. Ensure the charger is powered off before cleaning.
• Cable and Connector Inspection: Periodically inspect the charging cable and connector for any signs of damage, wear, or corrosion. If any damage is found, discontinue use immediately and contact customer support.
• Ventilation: Ensure that the charger's ventilation openings (if any) are not blocked to prevent overheating.

7. Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, or if issues persist, contact customer support.

8. Specifications

• Model: redcfwe
• Brand: Feyree
• Charging Capacity: 7kW / 11kW / 22kW (model dependent)
• Adjustable Current: 8A / 10A / 13A / 16A / 25A / 32A
• Connector Type: Type 2 (IEC62196-2)
• Connectivity: Wi-Fi (Tuya Smart App)
• Protection Features: Lightning-proof, Leakage protection, Overvoltage protection, Overheat protection, Overcurrent protection, Ground protection.
• Ingress Protection (IP) Rating: IP65 (Waterproof)
• Flame Resistance Rating: UL94V-0
• ASIN: B0D7F551ZT

9. Warranty and Support

Specific warranty details are not provided in this manual. Please refer to the product packaging or the manufacturer's official website for warranty information.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Ensure you have your product model number and ASIN (B0D7F551ZT) ready when contacting support.

Manufacturer: redcfwe