Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your Hatteker Electric Men Shaver Replacement Heads. Please read this manual thoroughly before use to ensure proper function and longevity of the product. These replacement heads are specifically designed for Hatteker Electric Men Shaver Models RSCW-767 and HT-602.
Safety Information
Important: Always prioritize safety when handling sharp objects. The blade is very sharp and should be kept away from children. Exercise caution during installation and cleaning to prevent injury.
- Keep out of reach of children.
- Handle blades with care to avoid cuts.
- Ensure the shaver is turned off and unplugged before replacing heads.
Product Overview
Figure 1: Hatteker Electric Men Shaver Replacement Heads (Model RSCW-767 and HT-602)
This image displays three black replacement heads for Hatteker electric shavers. Each head features a series of fine, sharp blades designed for efficient shaving. They are rectangular in shape with a textured surface for secure handling.
The Hatteker Electric Men Shaver Replacement Heads are precision-engineered components designed to restore the optimal performance of your compatible Hatteker electric shaver. Each head contains multiple sharp blades for a close and comfortable shave. Regular replacement ensures hygiene and cutting efficiency.
Setup and Installation
- Preparation: Ensure your Hatteker electric shaver (Model RSCW-767 or HT-602) is turned off and unplugged from any power source.
- Remove Old Heads: Gently open the shaver head assembly. Depending on your specific shaver model, this may involve pressing release buttons or twisting the head counter-clockwise. Carefully remove the old, worn-out shaver heads. Dispose of them responsibly.
- Install New Heads: Align the new replacement heads with the corresponding slots on the shaver body. Ensure the heads click securely into place. Do not force them.
- Close Assembly: Close the shaver head assembly until it locks. Verify that the new heads are firmly seated and do not wobble.
- Initial Check: Briefly turn on the shaver to ensure the new heads operate smoothly and quietly. Turn it off immediately after checking.
For visual guidance, refer to your shaver's original instruction manual or the manufacturer's official support channels for model-specific head replacement procedures.
Operating Instructions
These replacement heads are designed to function identically to the original heads. For detailed operating instructions of your Hatteker electric shaver, please refer to the user manual that came with your shaver unit. General operating principles include:
- Ensure the shaver is fully charged before use.
- Hold the shaver at a right angle to your skin.
- Move the shaver in small, circular motions or straight lines against the direction of hair growth.
- Do not apply excessive pressure, as this can cause skin irritation or damage the blades.
Maintenance and Cleaning
Regular cleaning of your shaver heads is crucial for maintaining performance and hygiene. It is recommended to clean the heads after each use.
- Turn Off and Unplug: Always ensure the shaver is turned off and unplugged before cleaning.
- Open Head Assembly: Open the shaver head assembly as you would for replacement.
- Brush Cleaning: Use the small cleaning brush provided with your shaver (or a similar soft brush) to remove loose hair clippings from the blades and the inner chamber of the shaver head.
- Rinse (if applicable): If your shaver is designed for wet cleaning, you may rinse the shaver heads under warm running water. Ensure no water enters the main body of the shaver unless it is explicitly waterproof. Allow the heads to air dry completely before reattaching or closing the shaver.
- Lubrication (optional): Periodically, a drop of shaver oil can be applied to the blades to maintain smooth operation and reduce friction. Refer to your shaver's original manual for specific lubrication recommendations.
- Reassemble: Once clean and dry, reassemble the shaver heads and close the assembly.
Replacement Frequency: For optimal performance, it is generally recommended to replace shaver heads every 12-18 months, or sooner if you notice a decrease in shaving efficiency or increased skin irritation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver not cutting effectively after head replacement. | Heads not properly seated; blades dull (unlikely for new heads); shaver motor issue. | Ensure heads are securely clicked into place. If problem persists, check original shaver unit for issues or contact Hatteker support. |
| Increased skin irritation. | Improper shaving technique; heads not clean; sensitive skin. | Review operating instructions. Clean heads thoroughly. Consider using a pre-shave lotion. |
| Heads feel loose or wobbly. | Improper installation. | Remove and re-install heads, ensuring they click firmly into position. |
If you encounter issues not listed here, or if the problem persists after attempting the suggested solutions, please contact Hatteker customer support.
Specifications
- Product Type: Electric Shaver Replacement Heads
- Brand: Hatteker
- Compatible Models: RSCW-767, HT-602
- Number of Blades: 10 (per head, typical)
- Color: Black
- Package Dimensions: 4.21 x 1.81 x 1.14 inches
- Weight: 0.63 ounces
Warranty and Support
These replacement heads are covered by Hatteker's standard product warranty. For specific warranty terms and conditions, please refer to the documentation included with your original Hatteker shaver or visit the official Hatteker website.
For technical support, troubleshooting assistance, or warranty claims, please contact Hatteker customer service:
- Website: www.hatteker.com (Note: This is a placeholder URL, please refer to official product packaging for actual support contact information.)
- Email: Refer to Hatteker's official website for contact email.
- Phone: Refer to Hatteker's official website for contact phone number.
When contacting support, please have your product model (RSCW-767 or HT-602) and purchase information readily available.
