1. Safety Information
For your safety and enjoyment, it is recommended that you operate the vehicle on a wide, flat surface free from obstacles and pedestrians. Always ensure the area is clear before operating the RC car.
Recommended age for operation is 15 years and up.
2. Setup
2.1 Unboxing and Initial Inspection
Upon receiving your Serpent X20 1/10 Touring Car RTR, carefully remove all components from the packaging. Inspect the vehicle and included accessories for any signs of damage during transit. The package typically includes the remote, product manual, and a sticker sheet.
Video: Serpent 1/10 X20 RTR RC Car Unboxing and Operating Instructions. This video demonstrates the unboxing process and initial setup steps for the Serpent X20 Touring Car.
2.2 Battery and Charger (Not Included)
The Serpent X20 1/10 Touring Car RTR does not include batteries or a charger. You will need to acquire a compatible battery (e.g., LiPo battery) and a suitable charger separately. Refer to the vehicle's specifications for recommended battery types and voltage requirements.
2.3 Transmitter and Receiver
The vehicle is equipped with high-quality Dragon-RC electronics, including a transmitter and receiver. Ensure the transmitter has fresh batteries installed (typically AA batteries, not included). Power on the transmitter before powering on the vehicle to establish a connection.
Image: Dragon-RC electronics components for the Serpent X20, showing the transmitter, receiver, 45A electronic speed controller, 9T brushless motor, and 6KG high torque servo.
2.4 Body Installation
The pre-cut and pre-painted bodywork is designed for easy installation. Secure the body to the chassis using the provided body clips or mounting pins. Ensure it is firmly attached before operation.
3. Operating Instructions
3.1 Powering On and Off
- Ensure the transmitter is powered on first.
- Connect the battery to the Electronic Speed Controller (ESC) in the vehicle.
- Power on the vehicle's ESC.
- To power off, reverse the sequence: turn off the vehicle's ESC, then disconnect the battery, and finally power off the transmitter.
3.2 Basic Controls
- Throttle: Use the trigger on the transmitter to control forward and reverse movement. Pull for forward, push for reverse/brake.
- Steering: Use the steering wheel on the transmitter to control left and right turns.
3.3 Enhanced Handling and Performance
The Serpent X20 features an ultra-narrow, symmetrical black fiberglass chassis plate optimized for flex and durability. Its enhanced suspension includes lower front wishbones, anti-roll bar compatibility, and a C-hub/steering block system for precise steering and feedback. The 45A electronic speed controller and brushless 9T motor provide impressive acceleration and speed.
Image: Close-up view of the Serpent X20's drivetrain and gear differential, highlighting the precision components.
Image: The high-performance chassis plate and black nylon rear & front shock towers and shocks of the Serpent X20.
4. Maintenance
Regular maintenance is crucial for the longevity and performance of your Serpent X20. After each use, inspect the vehicle for any loose screws, damaged parts, or debris accumulation.
- Cleaning: Use a soft brush or compressed air to remove dirt and dust from the chassis, suspension, and electronics. Avoid using water directly on electronic components.
- Component Check: Regularly check the carbon fiber and CNC aluminum parts for any signs of wear or damage. Ensure all moving parts, especially in the drivetrain and suspension, operate smoothly.
- Tires: Inspect racing tires for wear and tear. Replace as needed to maintain optimal grip and performance.
Image: A detailed diagram labeling various components of the Serpent X20, useful for maintenance and part identification.
5. Troubleshooting
If you encounter issues with your Serpent X20, perform the following basic checks:
- No Power: Ensure the battery is fully charged and correctly connected. Check that both the transmitter and vehicle ESC are powered on.
- Loss of Control: Verify that the transmitter batteries are not low. Check for any interference in the operating environment.
- Unusual Noises: Inspect the drivetrain (gears, belts) for any obstructions or damaged parts.
For more detailed troubleshooting, refer to the comprehensive product manual included with your vehicle.
6. Specifications
- Product Dimensions: 6.8 x 9 x 21 inches
- Item Weight: 13.2 pounds
- Item Model Number: 10/1
- Manufacturer Recommended Age: 15 years and up
- Key Features:
- Factory assembled 1/10 scale Touring RC Car
- Racing tires and pre-cut/pre-painted bodywork
- High-quality Dragon-RC electronics (45A ESC, brushless 9T motor)
- Ultra-narrow, symmetrical black fiberglass chassis plate
- Enhanced suspension with lower front wishbones and anti-roll bar compatibility
- C-hub/steering block system for precise steering
7. Warranty and Support
This product is manufactured by Serpent. For any warranty claims, technical support, or inquiries regarding replacement parts, please contact Serpent's official customer service channels. Refer to the product packaging or the official Serpent website for contact information.
