Sapgaks Children's House Bed 90x200 for 2 Children Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, safe use, and maintenance of your Sapgaks Children's House Bed 90x200. Please read all instructions carefully before assembly and use to ensure safety and proper function.

Safety Warnings

• Maximum Load: Do not exceed the maximum load capacity of 120 kg (264 lbs) per bed. Overloading can lead to structural failure and injury.
• Assembly: Assemble the bed carefully according to the provided instructions to ensure stability. Incorrect assembly can compromise safety.
• Pinch Points: Pay attention to edges and pinch points during assembly and use to avoid injury.
• Supervision: Children should be supervised when using the bed, especially during play, to prevent accidents.
• Ventilation: Ensure adequate ventilation in the room where the bed is placed.
• Mattress: Use a mattress compatible with the 90x200 cm dimensions. An ill-fitting mattress can create gaps or instability.

Package Contents

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.

• Bed frame components (solid pine wood)
• Slatted bed base (2 sets)
• Bedside table components
• Assembly hardware (screws, dowels, Allen key, etc.)
• Illustrated assembly instructions (separate document)

Setup and Assembly Instructions

Assembly requires two adults. Ensure you have sufficient space and the necessary tools (e.g., screwdriver, hammer, if not included). Follow the steps in the order provided.

Step 1: Unpack and Identify Parts

Carefully unpack all components from the two packages and lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in the separate assembly guide to identify each piece.

Step 2: Assemble the Bed Frames

Begin by assembling the two individual bed frames. Attach the side rails to the headboard and footboard sections using the provided hardware. Ensure all connections are secure and tightened appropriately.

Image: Two individual bed frames with slatted bases, ready for the house structure. This shows the basic bed structure before the roof is added.

Step 3: Install Slatted Bed Bases

Once the bed frames are stable, place the slatted bed bases into position within each frame. Secure them according to the assembly guide. These bases provide essential support for the mattress.

Image: A close-up view of the wooden slatted bed base being installed into the bed frame, highlighting the support structure.

Step 4: Assemble the House Structure

Connect the roof beams and vertical supports to form the house-shaped structure over each bed. Ensure all connections are tight and stable. This forms the decorative and structural canopy.

Image: A technical diagram illustrating the overall dimensions of the assembled house bed in centimeters, including length, width, and height.

Step 5: Install the Bedside Table

Assemble the small bedside table and position it between the two bed frames, connecting it to the main structure as indicated in the assembly instructions. This table provides a shared surface.

Image: The fully assembled house bed with the integrated bedside table, shown in a decorated children's room setting.

Step 6: Final Checks

After assembly, thoroughly check all screws and connections to ensure they are securely tightened. The bed should be stable and free from wobbling. Test the stability before allowing children to use it.

Operating Instructions

Mattress Placement

Place two standard 90x200 cm mattresses directly onto the slatted bases. Ensure the mattresses fit snugly within the frame and do not create any gaps where a child could become entrapped.

Weight Capacity

Each bed is designed to support a maximum weight of 120 kg (264 lbs). Do not exceed this limit to prevent damage to the bed structure or potential injury to users.

Usage Environment

This bed is intended for indoor use only. Avoid placing it near heat sources, open flames, or in excessively humid environments, which can damage the wood.

Maintenance

Cleaning

Wipe the bed frame with a soft, damp cloth. For stubborn marks, use a mild soap solution and immediately dry with a clean cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the wood finish.

Regular Checks

Periodically (e.g., every 3-6 months) check all screws, bolts, and connections for tightness. Re-tighten if necessary to maintain the bed's stability and safety. Loose connections can lead to wobbling or structural failure.

Wood Care

The bed is made from solid pine wood with a water-based, saliva-resistant finish. To preserve the wood and finish, avoid prolonged exposure to direct sunlight, which can cause fading or drying. Maintain a stable room temperature and humidity.

Troubleshooting

Bed is Wobbly

• Ensure all screws and bolts are fully tightened.
• Verify that all components are correctly aligned according to the assembly instructions.
• Check if the bed is placed on an even and stable surface. Adjust if necessary.

Parts Missing or Damaged

• If you discover missing or damaged parts upon unpacking, do not proceed with assembly. Contact customer support with your purchase details and a clear description of the issue.

Slats are Squeaking

• Check if the slats are properly seated in their supports and are not rubbing against the frame.
• If squeaking persists, apply a small amount of furniture wax or silicone spray to the contact points between the slats and the frame.

Specifications

Warranty and Support

Warranty Information

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.

Customer Support

For assistance with assembly, missing parts, or any other inquiries, please contact Sapgaks customer support through the retailer where you purchased the product. Provide your model number (90x200) and purchase date for faster service.

You can also visit the official Sapgaks website for additional resources and contact information.