1. Introduction
Thank you for choosing the Livpure Zencool 45L Personal Air Cooler. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your air cooler. Please read this manual thoroughly before using the appliance and retain it for future reference.
2. Safety Instructions
To ensure safe operation, always follow these basic precautions:
- Ensure the power supply voltage matches the rating label on the cooler.
- Do not operate the cooler with a damaged cord or plug.
- Keep the cooler on a stable, level surface to prevent tipping.
- Do not immerse the cooler in water or other liquids.
- Unplug the cooler from the power outlet before filling water, cleaning, or performing any maintenance.
- Keep children and pets away from the cooler during operation.
- Do not block the air inlet or outlet vents.
- Avoid placing the cooler near heat sources or in direct sunlight for extended periods.
- This appliance is for household use only.
3. Package Contents
Verify that all items are present in the package:
- Livpure Zencool 45L Personal Air Cooler Unit
- User Manual (this document)
- Set of Wheels
4. Setup
4.1 Unpacking
Carefully remove the air cooler from its packaging. Inspect the unit for any damage that may have occurred during transit. If any damage is found, do not operate the cooler and contact customer support.
4.2 Wheel Installation
The cooler comes with a set of wheels for easy mobility.
- Carefully tilt the cooler to access the bottom.
- Insert each wheel stem into the designated slots on the base of the cooler until it clicks securely into place.
- Ensure all wheels are firmly attached before placing the cooler upright.
Image: Multi-directional sturdy wheels for easy movement.
4.3 Water Filling
Before operating, fill the water tank.
- Ensure the cooler is unplugged from the power outlet.
- Locate the water inlet on the cooler.
- Pour clean water into the tank, observing the water level indicator. Do not exceed the maximum fill line. The tank capacity is 45 liters.
- For enhanced cooling, you may add ice cubes to the dedicated ice chamber.
Image: The 45-liter water tank capacity ensures extended cooling without frequent refills.
Image: Dedicated ice chamber for additional cooling effect.
4.4 Power Connection
After filling the water tank, plug the power cord into a suitable 220V AC power outlet.
5. Operating Instructions
5.1 Control Panel Overview
The Livpure Zencool air cooler features intuitive control knobs for easy operation.
Image: Close-up of the control knobs for fan speed and cooling functions.
5.2 Powering On/Off
- To turn on the cooler, rotate the power/fan speed knob clockwise from the "OFF" position.
- To turn off the cooler, rotate the power/fan speed knob counter-clockwise to the "OFF" position.
5.3 Fan Speed Settings
The cooler offers 3 fan speed settings: Low, Medium, and High.
- Rotate the fan speed knob to select your desired airflow intensity.
5.4 Cooling Function
To activate the cooling function:
- Ensure the water tank is filled.
- Rotate the cooling knob to the "COOL" position. The water pump will start, circulating water over the honeycomb pads.
5.5 Swing Function (Motorized Vertical Louvers)
The cooler features motorized vertical louvers to distribute cool air across a wider area.
- Locate the swing control knob.
- Rotate the knob to activate the automatic vertical swing function.
- Adjust horizontal louvers manually to direct airflow horizontally.
Image: The cooler's powerful air delivery system with motorized vertical louvers for wide coverage.
5.6 Inverter Compatibility
This air cooler is designed to be compatible with inverters, ensuring uninterrupted cooling during power outages.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your air cooler. Always unplug the cooler before cleaning or maintenance.
6.1 Cleaning the Water Tank
- Drain any remaining water from the tank using the drain plug.
- Wipe the inside of the tank with a soft cloth and mild detergent.
- Rinse thoroughly with clean water to remove any detergent residue.
- Allow the tank to air dry completely before refilling.
6.2 Cleaning Honeycomb Pads
The cooler uses anti-bacterial honeycomb pads. Clean them periodically to maintain cooling efficiency and air quality.
- Carefully remove the honeycomb pads from their compartments.
- Rinse the pads under running water to remove dust and mineral deposits. Do not use harsh chemicals.
- Allow the pads to dry completely in a shaded area before reinserting them.
- Ensure the pads are correctly oriented when reinstalled.
Image: Anti-bacterial honeycomb cooling pads, essential for efficient and clean air delivery.
6.3 Exterior Cleaning
- Wipe the exterior surfaces of the cooler with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
6.4 Storage
If storing the cooler for an extended period:
- Drain all water from the tank and clean it thoroughly.
- Clean and dry the honeycomb pads.
- Store the cooler in a dry, dust-free place, preferably in its original packaging.
7. Troubleshooting
Before contacting customer support, refer to the following troubleshooting guide for common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooler does not turn on | No power supply; Power cord not plugged in; Power switch off. | Check power outlet; Ensure cord is securely plugged in; Turn power switch on. |
| Weak airflow | Low fan speed setting; Blocked air inlet/outlet; Dirty honeycomb pads. | Increase fan speed; Clear obstructions; Clean honeycomb pads. |
| No cooling effect | Water tank empty; Cooling function not activated; Dirty honeycomb pads. | Fill water tank; Activate cooling function; Clean honeycomb pads. |
| Unusual noise | Unit not on a level surface; Obstruction in fan; Water pump issue. | Place on a level surface; Check for obstructions; Contact customer support if pump noise persists. |
| Water leakage | Overfilled water tank; Drain plug not secured; Damaged tank. | Do not overfill; Ensure drain plug is tight; Contact customer support. |
8. Specifications
Detailed technical specifications for the Livpure Zencool 45L Personal Air Cooler:
| Feature | Specification |
|---|---|
| Brand | Livpure |
| Model Name | Zencool-45 L |
| Product Type | Personal Air Cooler |
| Water Tank Capacity | 45 Liters |
| Air Delivery | 2250 CMH |
| Air Throw Distance | Up to 23 feet |
| Coverage Area | Up to 265 sq. ft. |
| Motor Type | Motor with Thermal Overload Protection |
| Cooling Medium | Anti-Bacterial Honeycomb Pads |
| Number of Speeds | 3 |
| Special Feature | Built-In Wheels, Motorized Vertical Louvers, Ice Chamber, Inverter Compatibility |
| Power Source | Electric |
| Voltage | 220 Volts (AC) |
| Wattage | 110 Watts |
| Material | Plastic |
| Colour | White |
| Product Dimensions (D x W x H) | 36D x 38W x 76H Centimeters |
| Item Weight | 12 kg |
Image: Dimensional overview of the Livpure Zencool 45L Personal Air Cooler.
9. Warranty
The Livpure Zencool 45L Personal Air Cooler comes with a 2-year warranty on the motor from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your purchase receipt as proof of purchase for warranty claims.
The warranty does not cover:
- Damage caused by improper installation, misuse, or neglect.
- Damage caused by unauthorized repairs or modifications.
- Normal wear and tear of consumable parts like honeycomb pads.
Image: The product features a 2-year warranty on the motor, ensuring reliability.
10. Customer Support
For any queries, service requests, or warranty claims, please contact Livpure customer support.
- Website: www.livpure.com
- Email: support@livpure.com
- Toll-Free Number: 1800-XXX-XXXX (Please refer to the official Livpure website or product packaging for the most current contact information.)
