1. Introduction
Thank you for choosing the Megadream Mobile Gaming Controller Q11B-2. This manual provides detailed instructions for setting up, operating, and maintaining your controller to enhance your mobile gaming experience across various platforms.
The Megadream Mobile Gaming Controller is designed to hold both smartphones and tablets, transforming them into portable gaming consoles. It supports a wide range of gaming applications and platforms.
2. Setup and Connection
Before connecting, ensure the controller is switched off.
2.1 Bluetooth Connection (iOS & Android)
- Pre-Connection Check: Ensure the controller is powered off.
- Enable Bluetooth: Activate Bluetooth on your mobile device.
- For iOS & Android (Mode 1): Press and hold the 'RB' button + 'Home' button simultaneously on the controller. The cyan indicator light will turn on and flash swiftly. On your device's Bluetooth settings, select 'Xbox Wireless Controller'. Once connected, the indicator light will remain steady.
- For Android (Mode 2 - for specific games): Press and hold the 'X' button + 'Home' button simultaneously on the controller. The orange indicator light will turn on and flash swiftly. On your device's Bluetooth settings, select 'BSP-D10'. Once connected, the indicator light will remain steady.
2.2 Nintendo Switch Connection
- Press and hold the 'RT' button + 'Home' button simultaneously to boot the controller.
- On your Nintendo Switch, navigate to 'Controllers' > 'Change Grip/Order'.
- The controller will automatically connect to the Switch. The indicator light will remain steady upon successful connection.
2.3 PS3/PS4 Wired Connection
- Open your PS4 console's 'Settings' > 'Devices' > 'Controllers' > 'Communication Method' and select 'Use USB Cable'. Turn off your original controller.
- Connect the Type-C cable to the Type-C port of the D10 controller and the USB interface of the PS4/PS3 console.
- Press the 'Home' key on the controller. It will automatically connect to the PS4/PS3 console. The indicator light will remain steady upon successful connection.
2.4 Remote Play & Streaming Connections
This image provides step-by-step instructions for connecting the controller via Bluetooth to iOS/Android devices (two modes) and to Nintendo Switch. It also details the wired connection process for PS3/PS4 consoles.
Detailed steps are provided for connecting the controller to PS Remote Play, Xbox Remote Play, and Steam Link, enabling streaming gameplay from consoles and PC to mobile devices.
- PS Remote Play:
- Connect the D10 game controller by pressing and holding the 'Home' key. Then, on your iOS device, connect to 'DUALSHOCK 4 Wireless Controller' or on your Android device, connect to 'Wireless Controller'.
- Open the PS Remote Play mobile app.
- Log in to your PS account and select the console you wish to play on. Ensure your console is on or in rest mode.
- Start a new game or resume playing. Ensure mobile data usage is enabled in the PS Remote Play app if you are not connected to Wi-Fi.
- Xbox Remote Play:
- Connect the D10 game controller by pressing and holding the 'RB' key, then the 'Home' key. On your mobile device, connect to 'Xbox Wireless Controller'.
- Open the Xbox mobile app.
- Select the console you wish to play on and tap 'Remote Play on this device'. Your console must be connected to the internet.
- Begin playing your Xbox games from your mobile device with the D10 controller.
- Steam Link:
- Connect the D10 game controller by pressing and holding the 'RB' key, then the 'Home' key. On your mobile device, connect to 'Xbox Wireless Controller'.
- Open the Steam Link mobile app. Ensure your PC is powered on and Steam is launched.
- Start playing. You are now playing your PC games from your mobile device with the D10 controller.
3. Operating Instructions
3.1 Supported Platforms and Games
This image illustrates the broad compatibility of the Megadream controller, allowing users to play games across multiple platforms and cloud gaming services.
A visual representation of various popular games compatible with the Megadream controller across different platforms, including iOS, Android, PC/Steam, PS3/PS4 Remote Play, GeForce Now, and Xbox Cloud/Streaming.
The Megadream Q11B-2 controller supports a wide array of games and platforms, including:
- Direct play for controller-enabled games on iOS, Android, PC, NS-Switch, PS3, PS4 (e.g., Call of Duty, Roblox, Minecraft, Genshin Impact, Diablo Immortal).
- Cloud-based gaming services: GeForce Now, Netflix, Xbox Game Pass, Luna, MFi Apple Arcade.
- Streaming via Remote Play Apps: PlayStation Remote Play (PS5 streaming only, no direct connect), Xbox Remote Play, Steam Link.
3.2 ABXY Key Value Interchange
The controller features an ABXY key value interchange function to adapt to different game layouts (Switch mode to Xbox mode). It also includes dual motor vibration with four adjustable levels for enhanced haptic feedback.
If the ABXY button layout in a game does not match the physical buttons on the controller (e.g., when switching between Nintendo Switch and Xbox layouts), you can interchange the key values:
- Press the 'Y' button, 'A' button, and 'HOME' button simultaneously to switch the ABXY key value between Switch mode layout and Xbox mode layout.
3.3 Turbo Function
The controller offers a Turbo function with three speed settings (15/s, 25/s, 8/s) for rapid input. Additionally, M1 and M2 macro buttons can be programmed to execute complex key combinations with a single press.
The controller features a Turbo function for rapid, repeated button presses. It supports both manual and auto Turbo modes with three selectable speeds:
- Turbo Speeds: 15 presses/second, 25 presses/second, and 8 presses/second.
- To activate or adjust, use the 'T' key in combination with other buttons as per in-game instructions or controller settings.
3.4 Programmable Back Buttons (M1/M2)
The M1 and M2 back buttons are programmable, allowing you to map complex key combinations for quick execution.
- You can map basic keys (A, B, X, Y, L, ZL, R, ZR, L3, R3, D-pad) or a combination of keys to M1/M2.
- Refer to the controller's specific programming instructions (usually found in a quick start guide or on the manufacturer's website) for detailed steps on how to set up macros.
3.5 Vibration Feedback
The controller features dual motor vibration with four adjustable levels (No vibration, Light, Normal, Powerful). This function is supported on PC, NS-Switch, PS3, and PS4.
- To adjust vibration speed, press the 'T' button + Right joystick Up or Down.
4. Maintenance
4.1 Charging the Controller
The controller is equipped with a 600 mAh rechargeable battery, providing over 18 hours of gameplay on a full charge.
- Connect the controller to a power source using the provided USB-C cable.
- The charging indicator light will show the charging status and turn off or change color when fully charged.
4.2 Cleaning and Storage
- Use a soft, dry cloth to clean the controller's surface. Avoid using harsh chemicals or abrasive materials.
- Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- When not in use for extended periods, ensure the controller is fully charged before storage to preserve battery life.
5. Troubleshooting
5.1 Connection Issues
- Controller not connecting: Ensure the controller is fully charged. Verify that you are using the correct button combination for your device's connection mode (e.g., RB+Home for iOS/Android Mode 1, X+Home for Android Mode 2). Make sure Bluetooth is enabled on your device and that you select the correct controller name ('Xbox Wireless Controller' or 'BSP-D10').
- Connection drops frequently: Ensure there are no obstructions between the controller and your device. Avoid strong electromagnetic interference. Try re-pairing the controller.
5.2 ABXY Buttons Mismatch
- If the ABXY buttons do not match the in-game interface (e.g., 'A' acts as 'B'), press 'Y' + 'A' + 'HOME' simultaneously to switch the ABXY key value layout.
5.3 Vibration Not Working
- Ensure the game you are playing supports vibration feedback.
- Check if the vibration function is enabled in the game settings or controller settings.
- Adjust vibration levels by pressing 'T' + Right joystick Up/Down. Note that vibration is only supported on PC, NS-Switch, PS3, and PS4.
5.4 PS5 Remote Play Limitations
- The Megadream Q11B-2 controller supports PS5 only via Remote Play streaming, not through direct connection.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | Q11B-2 |
| Compatibility | iOS 13.4+, Android 6.0+, Windows, Mac, NS-Switch, PS4, Cloud Gaming, Remote Play |
| Stretch Length | 5.62 - 10.23 inches (143 - 260 mm) |
| Supported Tablet Size | Under 11 inches (e.g., iPad Pro 11 inch, iPad Air 11in, iPad 10/9/8, iPad mini 6/5/4, Galaxy Tab S9 FE/S9/S8/A9+/A8, Lenovo Legion Y700) |
| Battery | 600 mAh Rechargeable |
| Battery Life | Over 18 hours of gameplay |
| Joystick Type | Hall Effect Joystick (Zero drift, Zero deadzone, 5 million lifespans) |
| Trigger Type | Hall Effect Trigger (256 levels, <0.1mm response interval) |
| Vibration | Dual Motor Vibration (4 levels, supported on PC/NS-Switch/PS3/PS4) |
| Turbo Speeds | 15/s, 25/s, 8/s |
| Programmable Buttons | M1/M2 Back Buttons |
This chart outlines the physical and software compatibility of the controller, indicating its stretchable range for tablets up to 11 inches and listing numerous compatible iPhone and Android smartphone models.
Equipped with Hall triggers, the controller uses electromagnetic induction for highly accurate and responsive input, offering 256 levels of hierarchical changes within a 6mm stroke and a response interval of less than 0.1mm.
The controller features e-sports grade Hall joysticks, utilizing electromagnetic induction to prevent drift and dead zones. These joysticks are designed for accuracy, durability, and a lifespan of 5 million movements.
7. Warranty and Support
Information regarding product warranty and dedicated support channels was not available in the provided product data. Please refer to the product packaging or the official Megadream website for the most current warranty terms and customer support contact details.
