LAMTTO 9.26-inch Wireless CarPlay Screen User Manual

Introduction

The LAMTTO 9.26-inch Wireless CarPlay Screen is a portable car stereo system designed to enhance your driving experience by integrating your smartphone's functionalities directly into your vehicle. It offers seamless compatibility with Apple CarPlay and Android Auto, providing access to GPS navigation, Bluetooth connectivity, mirror link capabilities, and smart voice control. This manual provides detailed instructions for installation, setup, operation, and maintenance of your new device.

Image: The LAMTTO 9.26-inch Wireless CarPlay Screen showing a split display of GPS navigation and music playback.

Package Contents

Please ensure all the following items are included in your package:

• 1 x 9.26 Inch CarPlay Screen Monitor
• 1 x 9.8 ft Car Charger Cable
• 1 x 4.65ft Aux cable
• 1 x Suction Cup Bracket and Desktop Bracket

Image: A visual representation of all components included in the product package, including the screen, cables, and mounting brackets.

Specifications

Installation Guide

The LAMTTO CarPlay screen offers flexible installation options to suit various vehicle dashboards and windshields. Choose between the adhesive mount or the suction cup mount based on your preference.

1. Adhesive Mount Installation

1. Choose a flat area on your dashboard for installation.
2. Thoroughly clean the chosen dashboard area to ensure proper adhesion.
3. Rotate the button on the bracket to adjust the tightness.
4. Remove the protection film from the adhesive base of the bracket.
5. Firmly press the bracket onto the cleaned dashboard area. For optimal adhesion, allow 10 hours for the adhesive to set before attaching the screen.
6. Install the CarPlay screen onto the bracket, ensuring it clicks securely into place.

Image: Visual steps for installing the CarPlay screen using the adhesive dashboard mount.

2. Suction Cup Mount Installation

1. Attach the suction cup mount to the CarPlay screen.
2. Choose a clean, flat area on your windshield or dashboard for installation.
3. Thoroughly clean the chosen area.
4. Press the suction cup mount firmly onto the cleaned surface.
5. Press the lever on the suction cup to lock it securely in place.
6. Adjust the angle of the screen for optimal viewing and tighten the screw to secure the position.

Image: The LAMTTO CarPlay screen installed on a dashboard using the suction cup mount, demonstrating its adjustability.

Installation Video Guide

For a visual walkthrough of the installation process, please refer to the official video below:

Setup & Connectivity

The LAMTTO CarPlay screen offers multiple ways to connect to your smartphone and vehicle's audio system.

1. Powering On

Simply insert the car charger cable into your vehicle's cigarette lighter socket. The device will power on automatically.

2. Wireless CarPlay & Android Auto Connection

To connect your smartphone wirelessly:

1. On the CarPlay screen, click the "CarPlay" or "Android Auto" icon.
2. Turn on Wi-Fi and Bluetooth on your smartphone.
3. On your phone's Bluetooth settings, search for and connect to the device named "T86B-E3BB" (or similar, as displayed on the CarPlay screen).
4. After successful pairing, your phone will automatically connect to CarPlay or Android Auto.

Image: A visual guide illustrating the wireless connection options for Apple CarPlay, Android Auto, and Airplay/Android Cast.

3. Audio Output Options

The device supports multiple audio output methods:

• Built-in Speaker: The car stereo has 2 local horn 8R 2W speakers for direct audio output.
• Bluetooth to Car Speaker: Use Bluetooth 5.3 to connect the CarPlay screen to your car's stereo system for stable and dynamic music.
• FM Transmit: Transmit audio wirelessly to your car's stereo by tuning both the CarPlay screen and your car radio to the same blank FM frequency (Supported frequency band: 87.5MHz-110MHz).
• Aux to Car's Audio: Use the provided Aux cable to transmit audio directly to your car's Aux input for a wired connection.

Image: A visual breakdown of the four available audio output methods: Built-in Speaker, Aux to Car's Audio, FM Transmit, and Bluetooth to Car Speaker.

4. Mirror Link (Airplay & Android Cast)

The screen supports mirroring content from your iOS or Android phone, allowing you to display videos and other media. Ensure Siri/Google Assistant is enabled on your phone to use this function.

Image: The CarPlay screen displaying mirrored content from a smartphone, with icons for YouTube, Instagram, Hulu, and TikTok.

Operating Instructions

1. Smart Voice Control (Siri & Google Assistant)

Utilize the built-in microphone to interact with Siri or Google Assistant for hands-free operation. This allows you to make calls, send messages, play music, and navigate using voice commands, enhancing driving safety and convenience.

Image: A driver using voice commands like "Call Mark," "Play Music," "Navigate to home," and "Send Message to Bob" with the CarPlay screen.

2. GPS Navigation

Connect your smartphone to the CarPlay screen to access real-time GPS navigation. This system uses your phone's map applications, eliminating the need for frequent map updates or additional fees.

3. Split Screen Functionality

The 9.26-inch touch screen supports split-screen mode, allowing you to view navigation, control music, and manage calls simultaneously for improved multitasking while driving.

Maintenance

To ensure the longevity and optimal performance of your LAMTTO CarPlay screen, follow these maintenance guidelines:

• Cleaning: Use a soft, lint-free cloth to gently wipe the screen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid abrasive materials or harsh chemicals.
• Storage: If removing the device for storage, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Handle all cables with care. Avoid sharp bends or excessive pulling that could damage the connectors or wiring.

Troubleshooting

If you encounter any issues with your LAMTTO CarPlay screen, please refer to the following common troubleshooting steps:

• Device Not Powering On:
  • Ensure the car charger cable is securely plugged into both the device and the cigarette lighter socket.
  • Check if the vehicle's cigarette lighter socket is functioning correctly (e.g., by testing with another device).
• Wireless Connection Issues (CarPlay/Android Auto):
  • Verify that Wi-Fi and Bluetooth are enabled on your smartphone.
  • Ensure your phone is not connected to other Bluetooth devices that might interfere.
  • Forget the device from your phone's Bluetooth settings and attempt to re-pair.
  • Restart both your smartphone and the CarPlay screen.
• No Audio Output:
  • Check the volume levels on both the CarPlay screen and your vehicle's stereo.
  • If using FM transmission, ensure the CarPlay screen and car radio are tuned to the exact same blank FM frequency.
  • If using the Aux cable, ensure it is securely connected to both the device and your car's Aux input, and your car stereo is set to Aux mode.
  • If using Bluetooth audio, ensure the CarPlay screen is successfully paired and connected to your car's Bluetooth.
• Touchscreen Unresponsive:
  • Restart the device.
  • Ensure the screen is clean and free from debris or moisture.

Warranty & Support

The LAMTTO CarPlay screen comes with a 12-month after-sale service. For any technical assistance, warranty claims, or further inquiries, please contact LAMTTO customer support through the platform where you purchased the product. Please have your model number (RC16) and purchase details ready when contacting support.