1. Introduction
Thank you for choosing the BONTEC Full Motion TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed for 26-60 inch LED LCD Flat & Curved TVs with a maximum weight capacity of 88 lbs (40 kgs) and VESA compatibility up to 400x400mm.
2. Safety Information
- Ensure all components are present and undamaged before installation. Do not use if any parts are missing or defective.
- This product is intended for installation on solid concrete walls, brick walls, or wood stud walls. DO NOT MOUNT ON DRYWALL ALONE.
- Verify the wall structure can safely support the combined weight of the mount and your TV. Consult a qualified professional if unsure.
- Do not exceed the maximum weight capacity of 88 lbs (40 kgs).
- Use appropriate safety gear during installation, including eye protection.
- Keep children and pets away during installation.
- Tighten all screws firmly but do not overtighten to avoid stripping or damaging components.
3. Package Contents
Please check the package to ensure all parts are included:
Image: Included hardware for the BONTEC TV Wall Mount.
- Wall Mount Assembly
- Concrete Anchors (x3)
- Lag Bolts (x3)
- Washers (φ6mm x3)
- Wrench
- TV Mounting Screws: M4*12mm (x4), M4*30mm (x4), M6*15mm (x4), M6*30mm (x4), M8*20mm (x4), M8*50mm (x4)
- Spacers: D8*5mm (x8), D8*10mm (x8)
- Square Washers (M4/M6/M8)
4. Specifications
| Feature | Description |
|---|---|
| Model Number | MG400-US-FBA |
| Compatible TV Sizes | 26 - 60 inches |
| Maximum Weight Capacity | 88 lbs (40 kgs) |
| VESA Compliance (mm) | 100x100, 100x200, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 |
| Material | Metal |
| Tilt Angle | +5° to -10° |
| Swivel Angle | ±90° (depending on TV size) |
| Level Adjustment | ±3° |
| Distance from Wall | Min: 3.15 inches, Max: 19.7 inches |
Image: Compatibility and VESA standards for the mount.
5. Setup and Installation
5.1 Pre-Installation Checks
- Identify your wall type: Wood Studs, Concrete, or Brick.
- Gather necessary tools: Drill, stud finder (for wood studs), level, pencil, measuring tape, screwdriver.
- Determine the desired height and position for your TV.
Image: Applicable wall types for installation.
5.2 Attaching Brackets to TV
- Carefully place your TV face down on a soft, clean surface.
- Identify the VESA mounting holes on the back of your TV.
- Select the correct screws (M4, M6, or M8) and spacers that fit your TV's mounting holes. Use spacers if the TV back is uneven or if screws are too long.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure they are securely fastened and level.
5.3 Mounting the Wall Plate
- Mark the desired drilling locations on the wall using the wall plate as a template. Use a level to ensure accuracy.
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the lag bolts/anchors used.
- For concrete/brick walls: Insert the concrete anchors into the drilled holes.
- Align the wall plate with the drilled holes and secure it to the wall using the lag bolts and washers. Tighten firmly.
Image: The BONTEC Full Motion TV Wall Mount.
5.4 Hanging the TV
- With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate.
- Ensure the TV is securely seated on the wall plate.
- Tighten any safety screws or locking mechanisms on the TV brackets to prevent accidental dislodgement.
Image: Easy installation process.
6. Operating Instructions
The BONTEC Full Motion TV Wall Mount offers various adjustments for optimal viewing experience:
- Swivel: The mount allows for a swivel range of up to ±90 degrees, enabling you to adjust the TV's horizontal viewing angle. Gently push or pull the TV to the desired position.
- Tilt: You can tilt the TV from +5 degrees (upward) to -10 degrees (downward) to reduce glare and optimize vertical viewing angles. Loosen the tilt adjustment knobs, set the desired angle, and re-tighten.
- Level Adjustment: If your TV appears slightly unlevel after installation, you can adjust it by ±3 degrees. Loosen the leveling screws, adjust the TV, and re-tighten.
- Extension: The mount can extend from a minimum of 3.15 inches to a maximum of 19.7 inches from the wall, providing flexibility for viewing and accessing cables.
Image: Swivel, Tilt, and Level adjustments for enhanced viewing.
Image: Extended distance from the wall.
7. Maintenance
- Regularly check all screws and connections to ensure they remain tight and secure.
- Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Do not apply lubricants to the moving parts unless specifically instructed by the manufacturer.
8. Troubleshooting
- TV not level: Loosen the leveling screws, adjust the TV to the desired level, and re-tighten the screws.
- Mount feels loose: Check all wall plate and TV bracket screws. Ensure they are tightened securely. If mounted on wood studs, verify the studs were properly located. If on concrete/brick, ensure anchors are fully seated.
- Difficulty adjusting swivel/tilt: Ensure no cables are snagged or obstructing movement. Check if adjustment knobs/screws are too tight; loosen slightly if necessary.
- Missing parts: Refer to the 'Package Contents' section. If parts are genuinely missing, contact BONTEC customer support.
9. Warranty and Support
BONTEC products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official BONTEC website. If you encounter any issues or require technical assistance, please contact BONTEC customer support through the following channels:
- Website: Visit the BONTEC official website for FAQs and support contact information.
- Email: Refer to your product packaging or warranty card for customer service email address.
Please have your model number (MG400-US-FBA) and purchase details ready when contacting support.
