XOSS G+ GPS Cycling Computer User Manual

1. Introduction

The XOSS G+ GPS Cycling Computer is a wireless, USB rechargeable device designed to track and display essential cycling data. It features a 1.8-inch LCD display with automatic backlight and offers approximately 25 hours of battery life. The device supports ANT+ sensors for speed, heart rate, and cadence (sold separately) and utilizes GPS, GLONASS, and Galileo satellites for fast and stable positioning. Ride data can be viewed on a dedicated app and is compatible with third-party platforms like Strava and TrainingPeaks. The XOSS G+ is IPX7 waterproof, making it suitable for cycling in various weather conditions.

2. Package Contents

Verify that all items listed below are included in your package:

• XOSS G+ Cycling Computer x 1
• User Manual x 1
• Rubber Bands x 2
• USB Charging Cable x 1
• Mount x 1
• Mount Pad x 1

3. Setup

3.1 Mounting the Device

The XOSS G+ cycling computer is designed for easy installation and is compatible with Garmin and XOSS out-front mounts. Use the provided mount, mount pad, and rubber bands to secure the device to your bicycle's handlebars or stem. Ensure the mount is firmly attached and the computer clicks securely into place.

3.2 Initial Power On and GPS Acquisition

Press the power button to turn on the device. The first GPS signal acquisition may take approximately 30 seconds. For optimal signal reception, ensure the device has a clear view of the sky.

3.3 Time Zone and Unit Settings

The device allows for time zone and speed unit adjustments. Refer to the video below for detailed instructions on how to navigate these settings.

3.4 Connecting External Sensors

The XOSS G+ supports ANT+ standard sensors for speed, heart rate, and cadence (sold separately). To connect, ensure your external sensors are active and within range. The device will automatically detect and pair with compatible sensors.

4. Operating Instructions

4.1 Display Modes and Data Fields

The 1.8-inch LCD display shows various cycling data. You can switch between different data displays using the device buttons. The display is designed for clear readability, even at night, thanks to its automatic backlight feature.

4.2 Data Synchronization with XOSS App

After your ride, you can synchronize your data with the dedicated XOSS app. The app allows you to review detailed ride statistics and connect with third-party platforms like Strava and TrainingPeaks. The XOSS app requires iOS 11 or higher, or Android 8.0 or higher, and is compatible with most smartphone brands except Xiaomi and Huawei.

5. Maintenance

5.1 Battery Charging

The XOSS G+ features a built-in rechargeable battery with approximately 25 hours of operating time. Use the provided USB charging cable to charge the device. Ensure the charging port is dry before connecting the cable.

5.2 Waterproofing

The device is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This protects it from rain and splashes during cycling. However, it is not recommended for prolonged underwater use.

6. Troubleshooting

6.1 GPS Signal Acquisition Issues

If the device takes longer than 30 seconds to acquire a GPS signal, ensure you are in an open area with a clear view of the sky, away from tall buildings or dense foliage. Restarting the device may also help.

6.2 Data Synchronization Problems

If you experience issues synchronizing data with the XOSS app, ensure your smartphone's Bluetooth is enabled and the app is updated to the latest version. Check the app's device connection status. If problems persist, try restarting both the cycling computer and your smartphone.

6.3 Sensor Connection Issues

If external ANT+ sensors are not connecting, verify that the sensors have working batteries and are properly installed. Ensure they are within close proximity to the XOSS G+ during pairing. You may need to re-pair the sensors through the device settings.

7. Specifications

8. Warranty and Support

XOSS provides a standard warranty for this product. For warranty claims, technical support, or any inquiries regarding your XOSS G+ cycling computer, please contact XOSS customer service through their official website or the contact information provided in your product packaging. Please retain your proof of purchase for warranty validation.