1. Safety Information
Please read these instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Installation should only be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before installation, maintenance, or repair.
- Outdoor Use: This product is designed for outdoor use and has an IP54 rating, meaning it is protected against dust ingress and splashing water from any direction. However, avoid submerging the product in water.
- Voltage: Ensure the supply voltage matches the product's specified voltage (230 Volts).
- Heat: The LED light source may become warm during operation. Do not touch the light source directly when it is on.
- Damage: Do not operate the product if any part is damaged. Contact the manufacturer for replacement parts.
2. Product Overview
The HOFTRONIC Leeds LED Outdoor Wall Light is a modern and energy-efficient lighting solution for your outdoor spaces. It features an integrated motion sensor and a dusk-to-dawn sensor for automatic operation, providing warm white illumination (3000K) with 780 lumens of brightness at only 10 Watts of power consumption. Its robust design and IP54 rating ensure durability and reliable performance in various weather conditions.
Key Features:
- Integrated Motion Sensor: Detects movement up to 9 meters within a 140° angle.
- Adjustable Dusk Sensor: Automatically turns the light on at dusk and off at dawn.
- Adjustable Illumination Duration: Light duration can be set from 10 seconds to 15 minutes.
- Energy Efficient: 10W power consumption for 780 lumens of warm white light.
- Durable & Weatherproof: IP54 rated for protection against dust and splashing water.
- Easy Installation: Designed for straightforward wall mounting with external cable access.
3. Setup and Installation
The HOFTRONIC Leeds LED Outdoor Wall Light is designed for easy wall mounting. For safety and proper function, professional installation by a qualified electrician is recommended.
Installation Steps:
- Preparation: Ensure the main power supply to the installation area is switched off at the circuit breaker.
- Mounting Location: Choose a suitable wall location, considering the desired light coverage and motion sensor detection area.
- Attach Mounting Bracket: Use the provided mounting hardware to securely attach the wall mount bracket to the desired surface.
- Wiring: Connect the electrical wires from your mains supply to the light fixture's terminals. Ensure correct polarity (Live, Neutral, Earth) as per local regulations. The fixture is designed with external cable access for easier wiring.
- Secure Fixture: Attach the light fixture to the mounted bracket, ensuring it is firmly secured and sealed against moisture if necessary.
- Restore Power: Once installation is complete and all connections are secure, restore power to the circuit.
4. Operating Instructions
The HOFTRONIC Leeds wall light features an adjustable motion sensor and a dusk sensor for automated operation.
Sensor Adjustments:
The integrated sensor unit typically has controls (often small dials or switches) to adjust its settings. These are usually located on the underside or side of the sensor module.
- Detection Angle: The motion sensor has a 140° detection angle. Position the light to cover the desired area.
- Detection Range: The sensor can detect movement up to 9 meters. Adjust the sensitivity if needed to prevent unwanted triggers or to extend the range.
- Illumination Duration (TIME): This setting controls how long the light stays on after motion is detected. It can be adjusted from approximately 10 seconds to 15 minutes. Turn the dial clockwise to increase the duration, counter-clockwise to decrease it.
- Dusk Sensor (LUX): This setting determines the ambient light level at which the motion sensor becomes active. Turn the dial towards the 'sun' icon for the sensor to be active in brighter conditions (e.g., during overcast days) or towards the 'moon' icon for it to only activate in darker conditions (e.g., only at night).
5. Maintenance
The HOFTRONIC Leeds LED Outdoor Wall Light requires minimal maintenance due to its durable construction and IP54 rating.
- Cleaning: Periodically clean the fixture with a soft, damp cloth to remove dust and dirt. Do not use abrasive cleaners or solvents, as these can damage the finish or the polycarbonate diffuser.
- Inspection: Regularly inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
- No User-Serviceable Parts: The LED light source is integrated and not user-replaceable. Do not attempt to open or repair the fixture yourself.
6. Troubleshooting
If you encounter issues with your HOFTRONIC Leeds LED Outdoor Wall Light, refer to the following common troubleshooting steps:
- Light does not turn on:
- Check if the power supply is connected and switched on.
- Verify the LUX (dusk sensor) setting. If it's set too high (towards 'sun'), the light may not activate in current ambient light conditions.
- Ensure the TIME setting is not at its minimum.
- Check for any obstructions blocking the motion sensor.
- Light stays on continuously:
- Check if the LUX (dusk sensor) setting is too low (towards 'moon'), causing it to activate even in brighter conditions.
- Ensure there is no continuous motion within the sensor's detection range.
- Verify that the TIME setting is not set to its maximum or an 'always on' mode if available.
- Motion sensor is not detecting:
- Adjust the sensitivity of the motion sensor.
- Ensure the sensor is not obstructed and has a clear line of sight to the detection area.
- Verify the LUX setting is appropriate for the ambient light conditions.
If these steps do not resolve the issue, contact customer support or a qualified electrician.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | HOFTRONIC |
| Model Number | 2713584 |
| Product Dimensions (L x W x H) | 29 x 14.5 x 12 cm |
| Weight | 5 Kilograms |
| Power Consumption | 10 Watts |
| Luminous Flux | 780 Lumens |
| Color Temperature | 3000K (Warm White) |
| Voltage | 230 Volts |
| IP Rating | IP54 (Dust protected, splash-proof) |
| Detection Angle | 140° |
| Detection Range | Up to 9 meters |
| Adjustable Illumination Duration | 10 seconds to 15 minutes |
| Material | Polycarbonate |
| Finish Type | Painted |
| Light Source Type | LED (Integrated) |
| Installation Type | Wall Mount |
8. Warranty and Support
HOFTRONIC products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the documentation provided with your purchase or visit the official HOFTRONIC website.
If you require technical assistance, have questions about installation, or need to report a defect, please contact your retailer or the HOFTRONIC customer support directly. When contacting support, please have your product model number (2713584) and proof of purchase readily available.
