1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your ICECO APL35 12 Volt Car Refrigerator. Please read this manual thoroughly before first use and retain it for future reference. The ICECO APL35 is a portable fridge freezer designed for various applications including outdoor activities, camping, RVs, trucks, and boats, offering reliable cooling and freezing capabilities.
Figure 1: ICECO APL35 Portable Refrigerator with app control interface.
2. Key Features
- Dual-Zone Temperature Control: The APL35 offers independent temperature settings for two compartments, allowing for simultaneous refrigeration and freezing. This can be configured as fridge/freezer, freezer/fridge, or single-mode operation.
- Light Duty Aluminum Construction: The main body and lid are constructed from aluminum, providing durability and resistance to rust and corrosion while maintaining a lightweight design.
- SECOP Nano Compressor: Equipped with a SECOP Nano Compressor, this unit provides a cooling range from -4°F to 68°F (-20°C to 20°C). It features MAX mode for rapid cooling and ECO mode for energy efficiency. The compressor is compact and contributes to the unit's light weight of approximately 32 lbs.
- Low Noise Operation: Designed to operate at a low noise level of 32dB, ensuring minimal disturbance, especially during overnight use.
- Lid Hover Feature: Special hinges allow the lid to remain open at angles between 45° and 110°, preventing accidental closures and potential hand injuries.
- Tight Lock Latch: The lock latch design enhances sealing and refrigeration efficiency.
- Reboundable Handle: Features a reboundable elastic iron handle for easy movement and space-saving storage.
Figure 2: Lid Stay, Tight Lock Latch, and Reboundable Handle features.
Figure 3: Noise level and soft-close lid mechanism.
3. Setup
- Unpacking: Carefully remove the refrigerator from its packaging. Inspect for any damage during transit.
- Placement: Place the unit on a stable, level surface. Ensure adequate ventilation around the compressor area. Avoid direct sunlight or heat sources.
- Power Connection:
- DC Power (12/24V): Connect the DC power cable to the unit's DC input port and then to your vehicle's 12V or 24V power outlet (cigarette lighter socket).
- AC Power (100-240V): For home or standard outlet use, connect the AC power adapter to the unit's AC input port and then to a 100-240V AC power source.
- Initial Power On: Press the power button on the control panel to turn on the unit. The display will illuminate.
- App Connection (Optional): Download the ICECO app from your smartphone's app store. Follow the in-app instructions to pair your device with the APL35 for remote control and monitoring.
4. Operating Instructions
4.1 Temperature Setting
The APL35 features a user-friendly control panel for temperature adjustment. The unit has two compartments with independent temperature control.
- Select Compartment: Use the designated button (if available, refer to specific model's panel layout) to select the compartment you wish to adjust.
- Adjust Temperature: Use the '+' and '-' buttons to set the desired temperature for each zone. The temperature range is -4°F to 68°F (-20°C to 20°C).
4.2 Cooling Modes
- MAX Mode: Provides rapid cooling to reach the set temperature quickly. This mode consumes more power.
- ECO Mode: Optimizes power consumption for energy saving, suitable for maintaining temperature over longer periods.
4.3 App Control
Once paired, the ICECO app allows you to:
- Monitor current temperatures in both zones.
- Adjust target temperatures for each zone.
- Switch between MAX and ECO cooling modes.
- Turn the unit on or off.
Figure 4: ICECO App interface for remote control.
5. Maintenance
- Cleaning:
- Disconnect power before cleaning.
- Wipe interior and exterior surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Ensure the unit is dry before reconnecting power.
- Ventilation: Regularly check that the ventilation openings are clear of dust and debris to ensure efficient operation.
- Storage: When not in use for extended periods, clean the unit, leave the lid slightly ajar to prevent odors, and store it in a dry, well-ventilated area.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power supply; faulty cable; power outlet issue. | Check power connections; try a different cable or outlet; ensure vehicle ignition is on for DC power. |
| Insufficient cooling. | Poor ventilation; overloaded unit; high ambient temperature; door not sealed properly. | Ensure clear ventilation; do not overfill; operate in a cooler environment if possible; check lid seal. |
| Excessive noise. | Unit not level; fan obstruction. | Place on a level surface; check for obstructions around the fan. |
| App connection issues. | Bluetooth disabled; unit not in pairing mode; app error. | Ensure Bluetooth is on; restart unit and app; re-attempt pairing. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | ICECO |
| Model | APL35 |
| Capacity | 37 Quarts (approx. 35 Liters total, with 27L and 8L zones) |
| Cooling Range | -4°F to 68°F (-20°C to 20°C) |
| Compressor | SECOP Nano Compressor |
| Power Input | 12/24V DC, 100-240V AC |
| Noise Level | ≤32dB (in MAX mode) |
| Material | Aluminum |
| Item Weight | Approximately 32 lbs (14.5 kg) |
| Product Dimensions | 27"D x 14.4"W x 15.7"H (68.6cm D x 36.6cm W x 39.9cm H) |
Figure 5: Dimensions and capacity overview.
8. Warranty and Support
ICECO provides the following support for your APL35 refrigerator:
- Compressor Warranty: 5 years of technical assistance for the SECOP Nano Compressor.
- Accessory Warranty: 1 year of support for all accessories.
- Customer Support: Telephonic support and local support services are available. For assistance, please refer to the contact information provided with your product packaging or visit the official ICECO website.
