1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ID-COOLING SL360 PRO SE 360mm AIO CPU Liquid Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.
The ID-COOLING SL360 PRO SE is a premium All-In-One (AIO) liquid CPU cooler designed for high-performance computing systems. It features a customizable 2.1" LCD display, efficient cooling with three AS-120 silent fans, and broad compatibility with Intel and AMD sockets.
2. Package Contents
Verify that all components are present before beginning installation:
- SL360 PRO SE Radiator with Integrated Pump and LCD Display
- 3 x AS-120 Silent Fans
- Intel Mounting Hardware (Backplate, Brackets, Standoffs, Nuts)
- AMD Mounting Hardware (Longer Brackets, Shorter Brackets, Standoffs, Nuts)
- Thermal Grease
- Fan Screws
- USB 2.0 Cable
- ARGB 5V 3Pin Cable
- Pump Power Cable
- Fan Extension Cables (Daisy Chain)
This image displays the main components of the ID-COOLING SL360 PRO SE, including the radiator with the integrated pump and LCD display, and the three AS-120 fans.
3. Installation Guide
Follow these steps carefully for proper installation. Refer to the provided video for visual guidance.
3.1. General Installation Steps (Intel & AMD)
- Step 1: Prepare Motherboard Backplate (Intel) / Remove Retention Frame (AMD)
For Intel LGA1851/1700/1200/115X sockets, adjust the Intel backplate screws to the corresponding positions (pull outward for LGA1851/1700, pull inward for LGA1200/115X). Remove the adhesive backing and install it on the back of the motherboard.
For AMD AM4/AM5 sockets, remove the original AMD plastic retention frame, but keep the stock backplate. The stock backplate is needed for AMD installations.
Figure 3.1: Universal Mounting Kits for Intel and AMD sockets. This image shows the various mounting components included for both Intel and AMD platforms, including backplates, brackets, standoffs, and screws.
- Step 2: Install Standoffs and Brackets
Install the appropriate standoffs and Intel or AMD brackets in sequence. Secure them with the provided screw nuts. Ensure the brackets are oriented correctly for your CPU socket type.
- Step 3: Apply Thermal Paste and Prepare Water Block
Clean the CPU surface thoroughly. Apply a small amount of the included thermal paste to the center of the CPU's integrated heat spreader (IHS). Peel off the protective sticker from the bottom of the water block (cold plate).
Figure 3.2: Application of thermal paste on the CPU surface. This image demonstrates the correct method for applying thermal paste to the CPU before mounting the water block.
- Step 4: Mount Water Block
Carefully mount the water block onto the installed brackets, aligning the holes. Tighten the mounting screws in a diagonal pattern until snug. Do not overtighten.
- Step 5: Attach Fans to Radiator
Attach the three AS-120 fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case's cooling setup (typically blowing air through the radiator and out of the case, or into the case).
Figure 3.3: AS-120 fans mounted on the radiator. This image illustrates the three fans securely attached to the radiator, ready for installation into the PC case.
- Step 6: Cable Connections
The fans feature daisy chain connectors for simplified cable management. Link the fans together using these connectors. Then, connect the end of the fan daisy chain to the extension cable.
The water block has three main cables:
- USB 2.0: Connect the 9-pin USB 2.0 connector to an available USB 2.0 header on your motherboard. This is essential for LCD display control and software communication.
- ARGB 5V 3Pin: Plug the 3-pin ARGB connector into your motherboard's 5V 3-pin ARGB header. This controls the RGB lighting on the pump.
- PUMP (3-Pin Power): Connect the 3-pin power cable into the motherboard's AIO PUMP or CPU_OPT header. If neither is available, a standard CPU_FAN header can be used, but ensure it provides constant 12V power for optimal pump performance.
Figure 3.4: Daisy chain connectors for simplified fan wiring. This image illustrates how the fans connect to each other using daisy chain connectors, reducing cable clutter.
Figure 3.5: Close-up of the 2.1" LCD display on the pump. This image highlights the 2.1" LCD display, capable of showing real-time system metrics like CPU and GPU temperatures.
3.2. Installation Video Guide
For a detailed visual walkthrough of the installation process, please refer to the official installation guide video below:
This video provides step-by-step instructions for installing the ID-COOLING SL360 PRO SE liquid cooler, covering both Intel and AMD platforms.
4. Operation and Software
The ID-COOLING SL360 PRO SE features a customizable LCD display and requires dedicated software for full functionality.
4.1. Software Installation and Features
Download the "SPACE" software from the official ID-COOLING website. This software allows you to:
- Customize the 2.1" LCD dashboard with images, GIFs, or MP4 videos.
- Monitor real-time performance metrics such as CPU temperature, GPU temperature, fan speeds, and pump RPM.
- Switch between various display options and graphic styles.
This image shows the user interface of the ID-COOLING SPACE software, demonstrating its capabilities for customizing the LCD display and monitoring system performance.
4.2. Performance Overview
The SL360 PRO SE is designed for extreme cooling performance. Key features include:
- Powerful Pump: The latest GEN 7 pump operates at 2900RPM±10% for excellent heat dissipation.
- Silent Fans: Three AS-120 fans provide quiet operation and stable performance. Max. Air Pressure: 1.94mmH2O | Max. Air Flow: 58CFM. Noise Level: 27.2 dB.
This video provides a brief overview of the ID-COOLING SL360 PRO SE's features and performance capabilities.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your liquid cooler.
- Dust Removal: Periodically clean dust from the radiator fins and fan blades using compressed air. Ensure fans are not spinning during cleaning.
- Cable Management: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components.
- Thermal Paste: While not frequently required, if you ever remount the water block, clean off old thermal paste and apply new thermal paste.
- Liquid Check: AIO coolers are sealed systems and do not typically require liquid refills. If you notice any leaks or significant performance degradation, contact support.
6. Troubleshooting
If you encounter issues, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| High CPU Temperatures |
|
|
| LCD Display Not Working |
|
|
| Fans Not Spinning / RGB Not Lighting Up |
|
|
If the issue persists after attempting these solutions, please contact ID-COOLING customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model | SL360 PRO SE |
| Radiator Size | 360mm |
| LCD Display | 2.1" (480x480 resolution) |
| Fan Model | AS-120 Silent Fans |
| Max. Air Flow | 58 CFM |
| Max. Air Pressure | 1.94 mmH2O |
| Noise Level | 27.2 dB (Max) |
| Pump Speed | 2900 RPM ±10% |
| Compatibility (Intel) | LGA1851/1700/1200/1151/1150/1155/1156 |
| Compatibility (AMD) | AM5/AM4 |
| Material | Aluminum (Radiator) |
| Product Dimensions | 4.72"L x 0.98"W x 4.72"H (Fan) |
8. Warranty and Support
For warranty information and technical support, please visit the official ID-COOLING website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: ID-COOLING
Website: www.idcooling.com (Example, please refer to actual product documentation for official website)