Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your VEVOR Commercial Ice Maker, Model LB400TA. This machine is designed for commercial use, capable of producing up to 400 lbs of ice per 24 hours with a storage capacity of 330.7 lbs. It features an 800W compressor, a 3.5-inch LED control panel, and an automatic self-cleaning function.
Important Safety Instructions
Please read all instructions carefully before operating the appliance. Keep this manual for future reference.
- Ensure the appliance is connected to a properly grounded power outlet.
- Do not operate the appliance with a damaged power cord or plug.
- Keep ventilation openings clear of obstructions.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Only qualified personnel should perform repairs.
- Disconnect from power supply before cleaning or maintenance.
Setup and Installation
Proper installation is crucial for the performance and longevity of your ice maker. Refer to the following steps and the installation video for guidance.
What's in the Box:
- Ice Maker Unit
- Ice Storage Bin
- PP Cotton Filter
- Ice Bucket Drainage Pipe
- Ice Making Drainage Pipe
- Ice Scoop
- Buckle
- Nozzle
- PTFE Tape
- Pipe A & Pipe B (Water Inlet/Outlet Hoses)
- Filter Buckles
- Support Feet
1. Unpacking and Placement:
Carefully remove all packaging materials. Place the ice maker on a flat, stable surface. Ensure adequate ventilation around the unit. The product dimensions are 25"D x 35"W x 38"H.
Image: Thoughtful design features of the VEVOR Commercial Ice Maker, including adjustable feet and water connections.
2. Install Ice Storage Bin:
- Flip the ice storage bin over.
- Tighten the four support feet onto the bottom of the bin. The height of these feet can be adjusted.
- Wrap PTFE tape around the thread of the drainage connector.
- Screw the connector clockwise into the drainage hole on the ice storage bin.
- Attach the ice bucket drainage pipe to the connector using the fixed buckle.
3. Install Mainframe:
- Carefully place the ice maker mainframe on top of the installed ice storage bin, ensuring it aligns properly. This step requires at least two people due to the weight and size.
- Install the filter buckles on the back of the mainframe.
- Install the PP Cotton Filter into the buckles.
- Insert one end of Pipe A into the filter.
- Connect Pipe B to the potable water inlet on the back of the mainframe.
- Connect the ice making drainage pipe to the potable water outlet on the back of the mainframe.
- Connect the other end of Pipe A to your water source.
Image: Visual guide for the 3-step installation process.
4. Electrical Connection:
Plug the ice maker into a dedicated, grounded electrical outlet. Ensure the voltage matches the appliance requirements (AC115V 60Hz). Please wait 24 hours after installation before turning on the machine to allow refrigerants to settle.
Installation Video:
Video: Detailed demonstration of the ice maker installation process, including accessory setup and mainframe placement.
Operating Instructions
Your VEVOR Commercial Ice Maker features an intuitive 3.5-inch LCD control panel for easy operation.
Image: The 3.5-inch LCD control panel for the ice maker.
1. Control Panel Overview:
- Power Button: Turns the machine on/off.
- Mode Button: Cycles through different modes (e.g., scheduled power-on/off, force releasing).
- Clean Button: Initiates the automatic self-cleaning cycle.
- Adjust Thickness Buttons (+/-): Adjusts the thickness of the ice cubes.
- Display: Shows current status, timer, temperature, and error codes.
2. Starting Ice Production:
- Ensure the water supply is connected and turned on.
- Press the 'Power' button. The ice-making indicator light will illuminate, and the machine will begin the ice production cycle.
- Ice production typically takes 12-15 minutes per batch, depending on the selected ice thickness.
Image: The ice maker producing and storing ice cubes.
3. Adjusting Ice Thickness:
During the ice-making process, press and hold the 'UP' button (green arrow) to enter the ice thickness adjustment mode. The display will show 'L-XX' (e.g., L-12). Use the 'UP' and 'DOWN' buttons to adjust the thickness from 1 to 30. Thicker ice takes longer to freeze but melts slower, ideal for bars and restaurants. Thinner ice freezes faster but melts quicker.
Image: Examples of adjustable ice thickness and their applications.
4. Scheduled Power-On/Off:
In the OFF state, press the 'Mode' button to enter the schedule setting. Use the 'UP' and 'DOWN' buttons to set the desired power-on time (1-23 hours). The machine will confirm the schedule after 5 seconds. To cancel, press 'Mode' or 'Power'. Similarly, during ice making, press and hold the 'Mode' button for 3 seconds to set a scheduled power-off time.
5. Force Releasing:
During the ice-making process, press the 'Mode' button to switch to force releasing mode, which will release the ice from the evaporator.
Operation Video:
Video: This video demonstrates various user operations, including scheduled power-on, auto-cleaning, starting ice production, ice thickness adjustments, scheduled power-off, and force releasing.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your ice maker.
1. Automatic Self-Cleaning:
The ice maker features an auto self-cleaning function. In the 'OFF' state, press and hold the 'Clean' button for 3 seconds to activate the 10-minute cleaning cycle. To exit the cleaning process, simply press the 'Power' button.
Image: The ice maker's automatic self-cleaning function and water filter for clean ice.
2. Regular Cleaning:
- Exterior: Wipe the stainless steel casing with a soft, damp cloth.
- Filter Screen: Regularly remove and clean the filter screen located on the side of the unit to ensure proper airflow and heat dissipation.
- Ice Storage Bin: Periodically clean the ice storage bin with a mild detergent and rinse thoroughly. The food-grade liner ensures hygienic ice production.
3. Drainage Pump:
The certified electric drainage pump facilitates hassle-free drainage with a lifting height of 6.56 ft/2m. Ensure the drainage pipes are clear and free from blockages.
Troubleshooting
If you encounter issues with your ice maker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No ice production | No water supply; Power off; Compressor issue | Check water connection; Ensure power is on; Contact support if compressor fails. |
| Ice melts quickly | Poor insulation; High ambient temperature; Ice thickness setting too low | Ensure proper placement; Adjust ice thickness to a higher setting. |
| Water leakage | Loose connections; Blocked drainage pipe | Check all water and drainage connections; Clear any blockages in the drainage system. |
| Unusual noise | Loose components; Fan obstruction; Compressor issue | Inspect for loose parts; Clear fan area; Contact support if noise persists. |
Specifications
Detailed technical specifications for the VEVOR Commercial Ice Maker LB400TA.
Image: Dimensions and specifications of the VEVOR Commercial Ice Maker LB400TA.
| Feature | Specification |
|---|---|
| Model Number | LB400TA |
| Brand | VEVOR |
| Product Dimensions | 25"D x 35"W x 38"H |
| Ice Making Capacity | 400 lbs / 24H |
| Ice Storage Capacity | 330.7 lbs |
| Rated Power | 800 watts |
| Voltage/Frequency | AC115V 60Hz |
| Number of Ice Trays | 156 PCS |
| Noise Level | ≤65db |
| Main Material | Stainless Steel |
| Refrigerant Type | R290 |
| Refrigerant Charge | 123g |
Warranty and Support
Your VEVOR Commercial Ice Maker is designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation. Keep your proof of purchase for any warranty claims.
For additional support or to view frequently asked questions, visit the official VEVOR website or contact customer service.
