singlehomie SI235G35

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

SingleHomie 30 cm 2-Zone Induction Cooktop

Model: SI235G35

1. Introduction

Thank you for choosing the SingleHomie 30 cm 2-Zone Induction Cooktop, Model SI235G35. This manual provides essential information for the safe and efficient use of your new appliance. Please read these instructions thoroughly before installation and operation, and retain them for future reference.

2. Safety Information

Important Safety Instructions: Read Carefully Before Use

  • Ensure the cooktop is installed by a qualified technician according to local regulations.
  • Do not touch hot surfaces. Always use oven mitts or pot holders.
  • Do not operate the cooktop with wet hands.
  • Keep children away from the appliance during operation and when it is cooling down.
  • Never leave the cooktop unattended while cooking.
  • Do not store flammable materials on or near the cooktop.
  • Use only induction-compatible cookware.
  • In case of a crack in the ceramic glass surface, immediately switch off the appliance and disconnect it from the power supply.
  • Do not use the cooktop as a work surface or for storage.
  • Individuals with pacemakers or similar medical implants should consult their doctor before using an induction cooktop.
Safety features of the SingleHomie induction cooktop including hot surface reminder, overheat protection, and automatic shut-off.

Image: The cooktop includes safety features such as a hot surface reminder, overheat protection, and an automatic shut-off function to enhance user safety during cooking.

3. Product Overview

The SingleHomie SI235G35 is a 30 cm 2-zone induction cooktop designed for efficient and precise cooking. It features advanced half-bridge technology for stable heating and quiet operation.

3.1 Key Features

  • Half-Bridge Technology: Provides precise temperature control, uniform heating, and up to 30% more energy efficiency compared to single-transistor designs. This technology minimizes operational noise and temperature fluctuations.
  • Dual Cooking Zones: Two independently controllable cooking zones with a total power output of 3500W. The larger zone offers 2000W (2300W with Boost) and the smaller zone offers 1200W (1500W with Boost).
  • 9 Power Levels: Allows for versatile cooking, from gentle simmering to rapid boiling.
  • Boost Function: Temporarily increases power by up to 50% for faster heating.
  • 0-99 Minute Timer: For precise cooking control and automatic shut-off.
  • Safety Lock: Child safety lock to prevent accidental operation.
  • Low Noise Operation: Advanced heating and noise reduction technology minimizes electromagnetic and fan noise.
  • Intuitive Touch Controls: User-friendly interface for effortless operation.
Top-down view of the SingleHomie 30 cm 2-zone induction cooktop with power cord.

Image: The SingleHomie 30 cm 2-zone induction cooktop, showcasing its sleek black ceramic glass surface and integrated power cord.

Diagram showing the power distribution of the two induction zones: 2000W/2300W (Boost) for the larger zone and 1200W/1500W (Boost) for the smaller zone, with a total of 3500W.

Image: This diagram illustrates the power output for each cooking zone, highlighting the 3500W total power and the boost capabilities for rapid heating.

Comparison table between Single-Tube Design and Half-Bridge Design for induction cooktops, highlighting advantages of Half-Bridge in efficiency, power control, and reliability.

Image: A comparison table detailing the benefits of Half-Bridge Technology, such as higher efficiency and stable power output, over traditional single-tube designs.

Graph illustrating stable heating provided by SingleHomie compared to intermittent heating from other induction cooktops.

Image: A graph demonstrating the consistent and stable heating performance of the SingleHomie cooktop, contrasting it with the intermittent heating patterns of other models.

4. Setup

4.1 Unpacking

  • Carefully remove the cooktop from its packaging.
  • Inspect the appliance for any damage. Do not install if damaged.
  • Retain packaging materials for future transport or return if necessary.

4.2 Installation

This induction cooktop is designed for built-in installation. It comes with a plug for easy connection, eliminating the need for complex wiring.

  • Cut-out Dimensions: Ensure your countertop has a cut-out of 49.5 cm x 26.5 cm.
  • Appliance Dimensions: The cooktop measures 52 cm (length) x 29 cm (width) x 5 cm (height).
  • Electrical Connection: Connect the cooktop to a standard electrical outlet using the provided plug. Ensure the power supply matches the appliance's requirements.
  • Ensure adequate ventilation around the appliance.
Diagram showing the dimensions of the SingleHomie induction cooktop (52x29cm) and the required cut-out dimensions for installation (49.5x26.5cm).

Image: This illustration provides the precise dimensions for the cooktop and the necessary countertop cut-out, facilitating straightforward built-in installation.

4.3 Initial Use

  • Before first use, clean the ceramic glass surface with a damp cloth.
  • Ensure all packaging materials and protective films are removed.

5. Operating Instructions

The cooktop features intuitive touch controls for easy operation.

Close-up of the SingleHomie induction cooktop's touch control panel, showing power level indicators, timer, and safety lock buttons.

Image: The cooktop's intuitive touch control panel, designed for user-friendly operation with clear indicators for various functions.

5.1 Power On/Off

  • To turn on, touch the Power button. The display will show '0' or 'L'.
  • To turn off, touch the Power button again.

5.2 Adjusting Power Levels

  • Select the desired cooking zone by touching its corresponding control.
  • Use the + and - buttons to adjust the power level from 1 to 9.
Image showing the SingleHomie induction cooktop with a pot boiling, illustrating the 9 heating levels and boost function for energy saving.

Image: The cooktop in operation, demonstrating the availability of 9 heating levels and the boost function for efficient cooking.

5.3 Boost Function

  • To activate Boost, select a cooking zone and then touch the Boost button (often indicated by 'B').
  • The Boost function increases the power to the selected zone for approximately 5 minutes, ideal for rapid boiling or searing.
  • After 5 minutes, the power level will automatically revert to its previous setting.
Image showing a pot of boiling water on the induction cooktop with a graphic indicating the Boost function, which provides extra power for 5 minutes.

Image: The Boost function in action, providing a temporary surge of power to quickly heat contents, such as boiling water.

5.4 Timer Function

  • To set the timer, select a cooking zone and then touch the Timer button.
  • Use the + and - buttons to set the desired cooking time from 0 to 99 minutes.
  • Once the timer expires, the selected cooking zone will automatically switch off.
Image showing a pot on the induction cooktop with a graphic indicating a 99-minute timer function.

Image: The cooktop's timer function, allowing users to set cooking durations up to 99 minutes for precise and worry-free meal preparation.

5.5 Safety Lock (Child Lock)

  • To activate the safety lock, touch and hold the Lock button for a few seconds. An indicator will light up.
  • When activated, the control panel is locked to prevent accidental changes to settings or activation by children.
  • To deactivate, touch and hold the Lock button again until the indicator turns off.
Image of a child near the induction cooktop with a graphic indicating the safety lock feature.

Image: The safety lock feature, designed to prevent unintended operation, particularly useful in households with children.

5.6 Compatible Cookware

Induction cooktops require specific types of cookware. Use pots and pans with a magnetic base.

  • Compatible Materials: Cast iron, enameled iron, stainless steel with a magnetic base, or composite bottom pots.
  • Incompatible Materials: Glass, aluminum, copper, or ceramic cookware without a magnetic base.
  • Cookware Size: Ensure the bottom of the cookware is flat and has a diameter between 14 cm and 26 cm for optimal performance.
Diagram showing compatible and incompatible cookware types for induction cooktops, including composite bottom, stainless steel, enameled iron, and iron pots as compatible, and glass, aluminum, copper, and ceramic as incompatible.

Image: A visual guide to compatible and incompatible cookware, emphasizing the need for magnetic, flat-bottomed pots and pans within the specified size range.

6. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your cooktop.

6.1 Cleaning the Ceramic Glass Surface

  • Always ensure the cooktop is cool before cleaning.
  • Wipe spills immediately with a damp cloth.
  • For stubborn stains, use a ceramic hob cleaner and a soft cloth. Avoid abrasive cleaners, scouring pads, or harsh chemicals.
  • Dry the surface thoroughly after cleaning to prevent water spots.
Image showing a hand cleaning the smooth ceramic glass surface of the induction cooktop, highlighting its easy-to-clean design.

Image: The smooth ceramic glass surface of the cooktop is easy to clean, requiring only a soft cloth and appropriate cleaner.

6.2 General Care

  • Avoid dropping heavy objects on the cooktop surface, as this can cause damage.
  • Do not drag cookware across the surface to prevent scratches.
  • Ensure proper ventilation around the appliance to prevent overheating.

7. Troubleshooting

Before contacting customer support, please refer to the following common issues and solutions:

ProblemPossible CauseSolution
Cooktop does not turn on.No power supply; power cord not properly connected; circuit breaker tripped.Check power connection; reset circuit breaker.
Cooktop not heating.Incompatible cookware; cookware not centered; no pot detected.Use induction-compatible cookware; center the pot on the zone; ensure a pot is present.
Display shows 'E' or error code.Internal fault; overheating.Turn off and unplug the cooktop for a few minutes, then restart. If the error persists, contact customer support.
Unusual noise during operation.Normal fan noise; resonance from cookware.Some fan noise is normal. Check if the cookware is causing resonance; try different cookware.
Cooktop automatically shuts off.Overheat protection activated; timer expired; no cookware detected for an extended period.Allow the cooktop to cool down; check timer settings; ensure cookware is present.

8. Specifications

FeatureDetail
BrandSingleHomie
Model NumberSI235G35
Product Dimensions52 x 29 x 5 cm
Cut-out Dimensions49.5 x 26.5 cm
Weight5.5 kg
Power SourceCorded Electric
Total Power Output3500W
Number of Heating Zones2
Heating Surface MaterialGlass Ceramic
Special FeaturesLow noise, Uniform heating, Boost function, 9 power levels, 99-minute timer, Child safety lock
ColorBlack
Country of OriginChina

9. Warranty and Support

For warranty information and details on returns, please refer to the purchase platform's policies or contact SingleHomie customer service directly. Typically, products can be returned within 30 days of receipt if you change your mind. For defective or damaged products, specific assistance is available through the seller.

If you encounter any issues not covered in this manual or require further assistance, please contact SingleHomie customer support through the retailer where the product was purchased.

© 2024 SingleHomie. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.