1. Introduction
The nanoblock Pokémon Miraidon DX Building Kit allows you to construct a detailed model of Miraidon from the Pokémon Series. This kit is designed for enthusiasts who enjoy intricate building challenges, featuring a high level of detail and a significant number of pieces.
This Miraidon Deluxe Edition model stands approximately 6.21 inches (158mm) tall and comprises 1080 individual nanoblock pieces. It is rated with a difficulty level of 5, making it suitable for builders aged 15 years and up.
What's in the Box
- Pokémon - Miraidon DX Pokémon Series Building Kit (1080 pieces)
- Detailed Instruction Manual

Image 1.1: The product box for the nanoblock Pokémon Miraidon DX Building Kit, showing the assembled model and piece count.
Safety Information
- WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
- Keep all small parts away from young children and pets to prevent accidental ingestion.
- Ensure proper ventilation if using any adhesives (not included) during assembly.
2. Assembly Instructions
The nanoblock Miraidon DX kit requires careful and precise assembly due to the micro-sized nature of the blocks. Follow the included instruction manual step-by-step for the best results.
- Preparation: Unpack all pieces and organize them by color and shape if desired. Ensure you have a clean, well-lit workspace.
- Follow the Manual: Refer to the detailed, illustrated instruction booklet provided in the box. Each step will guide you through the placement of specific blocks.
- Precision: Nanoblocks are very small. Use tweezers (not included, but recommended for precision) to handle and place blocks accurately.
- Layer by Layer: Most nanoblock models are built layer by layer. Pay close attention to the orientation and connection points of each block.
- Check Connections: Ensure each block is firmly pressed into place to create a stable structure. Loose connections can lead to instability in the finished model.

Image 2.1: A front-facing view of the fully assembled nanoblock Miraidon DX model, showcasing its intricate details and vibrant colors.

Image 2.2: The nanoblock Miraidon DX model displayed on a wooden desk, illustrating its size relative to a typical indoor setting.

Image 2.3: The nanoblock Miraidon DX model set against a dramatic lightning background, highlighting its dynamic pose.
3. Usage and Display
Once assembled, the nanoblock Miraidon DX model is primarily intended for display. Its intricate design makes it a unique collectible and decorative item.
- Display Location: Choose a stable, flat surface for display, away from direct sunlight, excessive heat, or high humidity, which could affect the plastic over time.
- Handling: Due to the small size of the blocks and the intricate connections, handle the assembled model with care. Avoid dropping it or applying excessive force, as this may cause parts to detach.
- Pose Adjustment: Some sections of the model may allow for minor pose adjustments. Perform these adjustments gently to avoid stressing the connections.
4. Care and Maintenance
Proper care will help maintain the appearance and integrity of your nanoblock Miraidon DX model.
- Cleaning: To remove dust, use a soft, dry brush or a can of compressed air. Avoid using wet cloths or harsh cleaning agents, as these can damage the plastic or cause discoloration.
- Storage: If disassembling for storage, keep all pieces in a sealed container to prevent loss. Store in a cool, dry place.
- Avoid Extreme Conditions: Do not expose the model to extreme temperatures or prolonged direct sunlight, which can cause warping or fading of colors.
5. Troubleshooting
Here are solutions to common issues encountered during or after assembly:
- Model is Fragile or Parts Fall Apart:
Issue: Some sections of the model may feel unstable or prone to falling apart, especially during handling or minor bumps.
Solution: Ensure all blocks are fully pressed down and connected. For display models that will not be frequently handled, a small amount of plastic model adhesive (e.g., ABS cement, not included) can be applied to critical connection points for increased stability. Apply sparingly and carefully to avoid damaging the blocks.
- Instructions Seem Difficult/Advanced:
Issue: The instruction manual may appear complex, especially for those new to nanoblocks or intricate building kits.
Solution: Take your time. Nanoblock assembly requires patience and attention to detail. Review each step carefully before placing blocks. If a step is unclear, try looking at the subsequent steps for context. Building in a quiet environment can also help concentration.
- Missing or Wrong Pieces:
Issue: You may find that some pieces are missing or incorrect for your kit.
Solution: Double-check the packaging and your workspace thoroughly. If pieces are genuinely missing or incorrect, contact nanoblock customer support or the retailer where you purchased the kit for assistance. Refer to the "Warranty and Support" section for contact information.
6. Product Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5.04 x 5.51 x 6.21 inches (128mm x 140mm x 158mm) |
| Item Weight | 12.6 ounces |
| ASIN | B0D725HKTD |
| Item Model Number | NBPM_103 |
| Manufacturer Recommended Age | 15 years and up |
| Release Date | December 2, 2024 |
| Manufacturer | Kawada |
| Number of Pieces | 1080 |
| Difficulty Level | 5 |

Image 6.1: Diagram showing the approximate dimensions (height, width, depth) of the assembled nanoblock Miraidon DX model.
7. Warranty and Support
This nanoblock product is manufactured by Kawada and distributed by Bandai Namco in the U.S. Markets. For product support and inquiries, please refer to the official Bandai Namco warning label on your product box. This label serves as proof of an officially licensed product and entitles the purchaser to product support assistance within the United States.
For further assistance, you may visit the official nanoblock website or contact their customer service channels as indicated on the product packaging or official brand resources.