KAWADA Nanoblock Curious George NBCC 198 Assembly Instructions

Introduction

This instruction manual guides you through the assembly of the KAWADA Nanoblock Curious George NBCC 198 building set. This set allows you to recreate George, the popular character from the "Curious George" series, using 240 micro-sized building blocks. The finished model measures approximately 2.0 x 2.4 x 1.3 inches (5 x 6 x 3.2 cm) and is designed for ages 12 and up.

Package Contents

Image: KAWADA Nanoblock Curious George NBCC 198 product box, showing the character and block count.

• 240 Nanoblock pieces (Acrylonitrile Butadiene Styrene material)
• Detailed instruction sheet (included inside the box)

Please ensure all pieces are present before beginning assembly. Refer to the included instruction sheet for a complete list of parts.

Assembly Instructions

The KAWADA Nanoblock Curious George NBCC 198 set requires assembly. Follow the step-by-step diagrams provided in the physical instruction sheet included in your package.

1. Preparation: Open the package and carefully sort the Nanoblock pieces by color and size. This will make the assembly process smoother.
2. Follow Diagrams: Refer to the detailed diagrams in the included instruction booklet. Each step illustrates which blocks to use and where to place them.
3. Layer by Layer: Nanoblock models are typically built layer by layer from the base upwards. Pay close attention to the orientation of each block.
4. Secure Connections: Ensure each block is firmly pressed into place to create a stable structure.
5. Patience is Key: Due to the small size of the blocks, assembly requires patience and precision. Take your time to avoid errors.

Image: The fully assembled KAWADA Nanoblock Curious George model, showcasing its compact size when held in a hand.

Image: Rear view of the assembled KAWADA Nanoblock Curious George model, showing the intricate block construction.

Operating & Display

Once assembled, your Nanoblock Curious George model is ready for display. This is a static model designed for exhibition rather than active play.

• Display: Place the finished model on a flat, stable surface. Its compact size makes it suitable for desks, shelves, or display cabinets.
• Handling: Handle the model with care to prevent accidental disassembly, especially due to the small size of the interlocking blocks.

Maintenance

To keep your Nanoblock model in optimal condition:

• Cleaning: Use a soft, dry brush or a can of compressed air to gently remove dust from the model. Avoid using water or chemical cleaners, as these may damage the plastic.
• Storage: If disassembling for storage, keep all pieces in a sealed container to prevent loss.

Troubleshooting

• Missing Pieces: Carefully check the packaging and surrounding area. If pieces are genuinely missing, contact KAWADA customer support.
• Difficulty Assembling: Double-check the instruction diagrams. Ensure the correct blocks are being used and that they are oriented correctly. Sometimes, a small error in an earlier step can affect later steps.
• Unstable Model: Ensure all blocks are pressed firmly together. Re-examine the base layers for any loose connections.

Specifications

Warranty and Support

For any inquiries regarding missing parts, assembly assistance, or product information, please contact KAWADA customer support. Specific warranty details are typically provided within the product packaging or on the official KAWADA website.

Manufacturer: Kawada Co., Ltd.