VIRIBUS ABE-S1AB-AB

VIRIBUS Electric Tricycle Instruction Manual

Model: ABE-S1AB-AB

Your guide to safe and efficient operation.

1. Safety Information

Always prioritize safety when operating your VIRIBUS Electric Tricycle. Read all instructions carefully before assembly and use. Failure to follow safety guidelines may result in serious injury or damage to the product.

  • Wear a helmet and appropriate safety gear at all times.
  • Ensure all components are securely fastened before each ride.
  • Do not operate the tricycle under the influence of alcohol or drugs.
  • Adhere to local traffic laws and regulations.
  • Regularly inspect brakes, tires, and battery for proper function.
  • Keep hands and feet clear of moving parts.

2. What's in the Box

Verify that all components are present upon unboxing:

  • 1x Adult Electric Tricycle
  • 1x Charger
  • 1x Battery
  • 1x Power Cord
  • 1x Fastener Set
  • 1x Screwdriver
  • 1x Wrench Set
  • 1x Instructions Manual
  • 1x Rear Basket
  • 1x Horn
  • 1x Lock
  • 1x Tool Kit

3. Setup & Assembly

Follow these steps to assemble your VIRIBUS Electric Tricycle. For a visual guide, please refer to the assembly video below.

Video 1: Geemax Electric Tricycle Assembly Guide. This video demonstrates the step-by-step process of unboxing and assembling the tricycle components, including handlebars, wheels, brakes, and accessories.

  1. Unboxing and Initial Setup: Carefully remove all components from the packaging. (Refer to Video 1: 0:00)
  2. Handlebar Installation: Insert the handlebar stem into the frame and tighten the screw securely. (Refer to Video 1: 0:08)
  3. Chain Installation: Remove the frame protection, pass the chain through the chainwheel, connect the chain, and ensure it is locked. Then, install the chain onto the flywheel. Adjust the rear axle to ensure smooth chain operation and tighten the four screws. (Refer to Video 1: 0:18 - 1:43)
  4. Pedal Installation: Install the pedals. Note that the 'R' pedal installs by turning clockwise, and the 'L' pedal installs by turning counterclockwise. (Refer to Video 1: 1:44)
  5. Fender Installation: Assemble the front fender by attaching its support stay. Install the red reflectors and support stays on both the rear left and rear right fenders. (Refer to Video 1: 2:00 - 3:39)
  6. Headlight and Front Fender Installation: Remove the fork protection. Install the headlight and the assembled front fender onto the front fork simultaneously, then tighten them with screws. (Refer to Video 1: 3:40 - 4:03)
  7. Front Wheel Installation: Remove the screws and washers from the front wheel. Place the front wheel onto the fork, connect the motor wire (arrow to arrow), and install the safety hook. Securely tighten all components. (Refer to Video 1: 4:04 - 4:59)
  8. Rear Fender Installation: Install the rear fenders onto the rear axle. The process is the same for both the left and right sides. (Refer to Video 1: 5:00 - 5:45)
  9. Rear Wheel Installation: Install the rear wheels. Ensure each rear wheel is on the same plane as its respective rear axle and fits perfectly. (Refer to Video 1: 5:46 - 6:28)
  10. Brake Installation and Adjustment: Install the left and right brakes by removing the screws and washers from the brake calipers and installing them onto the frame. Adjust the screw on the opposite side of the brake to ensure the brake and brake disc are not in contact. Insert the brake cable, tighten it, and lock it with the screw. (Refer to Video 1: 6:29 - 8:10)
  11. Saddle Assembly and Installation: Assemble the saddle onto the seat post and then insert the seat post into the tricycle frame. Adjust to a comfortable height and secure. (Refer to Video 1: 8:11 - 8:28)
  12. Rear Basket Assembly and Bag Installation: Assemble the wire mesh rear basket. Once assembled, place the provided bag inside the basket and secure it. (Refer to Video 1: 8:29 - 9:39)
  13. Front Reflector and Stem Cap: Install the front reflector onto the handlebar and secure the cap on the stem. (Refer to Video 1: 9:40 - 9:55)
  14. Motor Wire Fixation: Securely fix the motor wire to prevent interference or damage during operation. (Refer to Video 1: 9:56 - 10:03)

4. Operating Instructions

Your VIRIBUS Electric Tricycle offers versatile riding modes and intuitive controls for an enjoyable experience.

4.1 Riding Modes

  • Throttle Mode: Engage the throttle for motor-powered assistance up to 15.5 mph without pedaling.
  • Pedal Assist Mode: Choose from five assistance levels (7.5/9.5/11/13/15.5 mph) to augment your pedaling effort.
  • Manual Control: Ride as a traditional tricycle using the 7-speed Shimano derailleur.
Illustration of three riding modes: throttle, pedal assist, and manual control.

Image 1: Visual representation of the three distinct riding modes available on the VIRIBUS Electric Tricycle.

4.2 Intuitive Controls and Display

The LCD display provides essential information at a glance:

  • Battery Meter: Always know your current charge level.
  • Speedometer: Track your speed in MPH or KM/H.
  • PAS Level: Select assistance levels 1-5 to run at a percentage of top speed.
  • Odometer: View your trip's distance and total distance traveled.
Close-up of the tricycle's handlebars showing the LCD display and controls for throttle, light, and horn.

Image 2: The tricycle's intuitive handlebar controls and LCD display, showing battery, speed, PAS level, and odometer readings.

4.3 Battery and Headlight Usage

The tricycle is equipped with a UL certified 48V 13Ah removable battery. Use the provided key to turn the battery on/off and to remove it for charging or security. The headlight can be activated via the controls on the handlebar. (Refer to Video 1: 10:04)

Close-up of the UL Certified 48V 13Ah Lithium battery with dual charging options and BMS protection.

Image 3: The UL Certified 48V 13Ah battery, highlighting its safety features and dual charging options.

4.4 Battery Charging

To charge the battery, connect the charger to the battery port. The red indicator light on the charger signifies that charging is in progress. The light will turn green when the battery is fully charged. (Refer to Video 1: 10:30)

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your electric tricycle.

  • Tires: Check tire pressure before each ride. Maintain recommended PSI for optimal performance and safety.
  • Brakes: Inspect brake pads and discs regularly for wear. Ensure brake levers are responsive and cables are not frayed. Adjust as needed to maintain effective stopping power.
  • Battery Care: Charge the battery fully after each use. Avoid completely draining the battery. Store the battery in a cool, dry place when not in use.
  • Chains: Keep chains clean and lubricated to ensure smooth gear changes and prevent rust.
  • Frame and Fasteners: Periodically check all bolts, nuts, and fasteners for tightness. Tighten any loose components.
  • Cleaning: Clean the tricycle with a damp cloth. Avoid using high-pressure water jets directly on electrical components.

6. Troubleshooting

Here are some common issues and their potential solutions:

ProblemPossible CauseSolution
Tricycle does not power onBattery is off or not charged; loose battery connection; faulty power button.Ensure battery is on and charged. Check battery connection. Contact support if power button is faulty.
Motor not assistingPAS level is 0; motor wire disconnected; faulty motor.Increase PAS level on the display. Check motor wire connection (arrow to arrow). Contact support if motor is faulty.
Brakes feel weakWorn brake pads; loose brake cable; brake disc misalignment.Inspect and replace worn brake pads. Adjust brake cable tension. Ensure brake disc is aligned and not rubbing.
Unusual noises during rideLoose components; dry chain; tire rubbing.Check and tighten all fasteners. Lubricate the chain. Inspect tires for rubbing against fenders or frame.

7. Specifications

FeatureDetail
Bike TypeElectric Bike
Age RangeAdult
BrandVIRIBUS
Number of Speeds7
ColorRoyal Blue
Wheel Size26 Inches
Frame MaterialCarbon Steel
Suspension TypeFront
Special Features48V 13Ah Battery, Dual Chain Design, Front Suspension, UL Certified Battery
Brake StyleDisc
Specific UsesCommuting, Leisure Riding, Urban Transportation
Model NameABE-S1AB-AB
Power SourceElectric motor
Wattage350W (Peak 500W)
Lithium Battery Energy Content624 Watt Hours (48V 13Ah)
Seat Material TypeVinyl
Maximum Weight Recommendation330 Pounds
Assembly RequiredYes
Bicycle Gear Shifter TypeThumb
Minimum User Height5.2 Feet
Fender MaterialSteel
Derailleur ConfigurationRear
UPC850062264915
Electric Assist TypePedal Assist
Frame TypeStep-Through

8. Warranty & Support

For warranty information, technical support, or any inquiries regarding your VIRIBUS Electric Tricycle, please refer to the contact details provided with your purchase documentation or visit the official VIRIBUS website. Keep your proof of purchase for warranty claims.

© 2024 VIRIBUS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.